Summary of the content on the page No. 1
Owner’s Manual
™
Hustler Mini Z
™
FasTrak Super Duty 36/42
Hustler Turf Equipment
PO Box 7000
Hesston, Kansas 67062
620-327-4911 • hustlerturf.com
PN 107708
Summary of the content on the page No. 2
GENERAL INFORMATION This manual applies to the following Hustler equipment lines: Photographs and illustrations used were current at the time of printing, but subsequent production changes may cause your machine to vary Hustler Mini Z 36/42 slightly in detail. Hustler Turf Equipment reserves the right to redesign and FasTrak Super Duty 36/42 change the machine as deemed necessary, without notification. If a change has been made to your machine which is not reflected in this owner’s To the new
Summary of the content on the page No. 3
2 107708_0808
Summary of the content on the page No. 4
HUSTLER MINI Z 36/42 TWO YEAR LIMITED WARRANTY FOR TRACTORS AND DECKS (THREE YEAR LIMITED WARRANTY ON DECK SPINDLE BEARING & DECK GAUGE FORK BEARING) ● Hustler Turf Equipment will correct any defect in the frame WHAT IS COVERED BY THIS WARRANTY resulting in frame breakage by repairing or replacing part(s) with Hustler Turf Equipment, makes the following warranty to the original new or used replacement parts. purchaser only: ● Hustler Turf Equipment will correct any defect in the deck a. First
Summary of the content on the page No. 5
LIMITATION OF REMEDIES ALLOCATION OF RISKS In no case shall Hustler Turf Equipment, be liable for any special, This agreement allocates the risks of product failure between Hustler Turf incidental, or consequential damages based upon breach of warranty, Equipment, and the purchaser. This allocation is recognized by both breach of contract, negligence, strict liability in tort, or any other legal parties and is reflected in the price of the goods. theory. Such damages include, but are not limi
Summary of the content on the page No. 6
FASTRAK SUPER DUTY 36/42 HUSTLER TURF CONSUMER PRODUCT FOUR YEAR OR 800 HOURS WARRANTY FOR RESIDENTIAL USE (TWO YEAR OR 800 HOURS WARRANTY FOR COMMERCIAL USE) UNITS WITH SERIAL NUMBER 0710 (FIRST 4 DIGITS) AND LATER ● Such repair, including parts and labor, shall be at the expense of WHAT IS COVERED BY THIS WARRANTY Hustler Turf Equipment, and, Hustler Turf Equipment, makes the following warranty to the original d. The Kawaski engine is covered by a two (2) year limited warranty, purchaser only:
Summary of the content on the page No. 7
incidental, or consequential damages based upon breach of warranty, ALLOCATION OF RISKS breach of contract, negligence, strict liability in tort, or any other legal This agreement allocates the risks of product failure between Hustler Turf theory. Equipment, and the purchaser. This allocation is recognized by both Such damages include, but are not limited to parties and is reflected in the price of the goods. ● Loss of profits ● Loss of savings or revenue OWNER'S RESPONSIBILITY ● Loss of use
Summary of the content on the page No. 8
SAFETY PRECAUTIONS The Quick Reference Decals are designed to give the operator brief information needed in the daily operation of the machine. These decals are not intended to be used in place of this manual but instead are to be used as an extension of this manual. These decals should not be removed or obliterated. Replace these decals if they become unreadable. It is the owner’s responsibility to make certain that the operators and This safety alert symbol is used to call attention to a
Summary of the content on the page No. 9
Safety and Instruction Decals ▲ ▲ Specific safety warning decals are located on the equipment near the immediate areas of potential hazards. These decals should not be removed or obliterated. Replace them if they become non-readable. The following illustrations show the various decals that are located on the machine. A brief explanation, for those requiring one, is shown to help the operator understand the meanings of these decals. Read Owner’s Manual and Quick Do not smoke while refueling. R
Summary of the content on the page No. 10
SLOPE GUIDE Use this diagram when determining the degree of slope to be mowed. o E (15 ) Slope Guide Lines o D (10 ) o C (5 ) Line A 1. Hold this sheet of paper in front of you. Make sure that line A is horizontal. 2. Align line B with a vertical surface such as a pole, tree or building. 3. Fold the paper along the slope guide lines (C, D or E). 4. Align the closest slope guide line with the ground slope. This will give you a close estimation of the ground slope to be mowed. Figure 2-1 107708
Summary of the content on the page No. 11
10 107708_0808
Summary of the content on the page No. 12
OPERATION material against a wall or obstruction. Material may ricochet back Safe Operating Practices toward ths operator. Always disengage the blades and wait for them This product is capable of amputating hands and feet and throwing to stop before crossing gravel drives, walks or roads. objects. Always follow all safety instructions to avoid serious injury or Always keep clear of the mower blades and attachments during their death. ▲ operation. Turn off blades when not mowing. ▲ Operation S
Summary of the content on the page No. 13
Mow a safe distance (minimum of 10 feet) away from drop-offs, vary. ▲ retaining walls, drainage ditches, embankments, water, and other Another consideration to safe mowing on slopes is to be aware of types of hazards to avoid a wheel dropping over the edge or to avoid what is located at the bottom of the slope. Extreme caution should the ground from breaking away. This will reduce the risk of the be used when there is a hazard located at the bottom of the slope. machine suddenly roling over ca
Summary of the content on the page No. 14
Control Panel C Control A D lever B F E Shown with control levers in neutral position Figure 3-2 G B. Deck lift pedal (Fig. 3-4) — the deck lift pedal is used to raise or lower the deck. Push on the pedal to raise the deck and then place A - Choke E - Oil pressure light the deck height locking pin into the desired cutting height hole. B - Throttle F - 20 amp fuse Push the deck lift pedal to raise the deck when going over C - Deck clutch switch G - 10 amp fuse obstructions. D - Ignition switch S
Summary of the content on the page No. 15
Slot Deck lift Bypass valve rod pedal (Left rod shown) (viewed from the rear left underneath side) Figure 3-4 5. With the deck clutch switch up and/or the control levers in the Figure 3-5A neutral position, slowly raise off of the seat. The engine should stop. 6. If the engine fails to stop when the deck clutch switch is up or one or both of the control levers is up and the operator is off the seat, Bypass valve rod check the function of the seat switch. If the seat switch is not (Left rod sho
Summary of the content on the page No. 16
FRONT OF TRACTOR FACES THIS DIRECTION N N FORWARD TRAVEL ZERO DEGREE TURN FORWARD TRAVEL REVERSE TRAVEL REVERSE TRAVEL RIGHT TURN RIGHT TURN N = Neutral Position Direction of arrows indicate direction of tractor movement. Figure 3-6 Do not tow the machine. Move it by hand or use a winch to load on a DANGER: When moving in the rearward direction push trailer for transporting. forward gently on control levers and avoid sudden When transporting on another vehicle, the tractor must be secured. move
Summary of the content on the page No. 17
Neutral Right Left control control lever lever Left Right control control lever lever Neutral maneuvers to become familiar with the operation of the Three point turn equipment before attempting normal speed operation. An inexperienced operator should not mow on slopes or on uneven terrain. WARNING: If you lose steering control while operating the machine, place the steering control levers in the park brake position immediately. Inspect the machine and involve your Hustler dealer to resolve the
Summary of the content on the page No. 18
Cutting more than that is not recommended unless grass is sparse or it is the end of the mowing season. Alternate mowing direction to keep the grass growing straight and Stop better dispersion of the clippings. Height handle Remember, grass grows at different rates at different time of the adjusting stop year. Mow more often in the early spring to maintain the same cutting height. As the growth rate slows in mid summer, mow less frequently. If you cannot mow at a regular interval, mow at a hi
Summary of the content on the page No. 19
107708_0808 18
Summary of the content on the page No. 20
MAINTENANCE & ADJUSTMENTS discharge chute. Never clear the discharge chute with the engine Safe Servicing Practices running. Turn off the engine and be sure the blades have stopped This product is capable of amputating hands and feet and throwing before cleaning. Use a stick to clear a plugged discharge area. objects. Always follow all safety instructions to avoid serious injury or Never use your hand! death. Grass collection system components are subject to wear, damage and ▲ deterioration,
