Summary of the content on the page No. 1
Operator’s Manual
CD48i / 968999758 CD52i / 968999759
CD52L / 968999760 CD61L / 968999761
CD61B / 968999762 TRD48i / 968999767
TRD52i / 968999768 TRD61L / 968999769
TRD72L / 968999770
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
English
Summary of the content on the page No. 2
©2007 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A.
Summary of the content on the page No. 3
CONTENTS MAINTENANCE .............................................................. 17 INTRODUCTION ............................................................... 5 Maintenance Schedule ............................................. 17 OPERATING ..................................................................... 5 Deck belt ................................................................... 18 Good Service .............................................................. 6 SYMBOLS AND DECALS ....
Summary of the content on the page No. 4
WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the infl uence of any mind altering substance.
Summary of the content on the page No. 5
INTRODUCTION Congratulations Thank you for purchasing a Husqvarna deck. It is built for superior effi ciency to rapidly mow primarily large areas.. This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance, etc.) by all who operate this machine is important for the safety of the operator and others. It can also considerably increase the life span of the machine and increase its resale value. I
Summary of the content on the page No. 6
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer. See the certifi cate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the fo
Summary of the content on the page No. 7
SYMBOLS AND DECALS These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. Used in this publication to notify the reader of a risk of personal injury or death, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx
Summary of the content on the page No. 8
SYMBOLS AND DECALS Read Shut off engine and Keep a safe Use on slopes No passengers Operator’s remove key before distance from no greater Manual performing any the machine than 10° maintenance or repair work Whole body Severing of fi ngers Do not open or Careful backing up, Careful going exposure to and toes remove safety watch for other forward, watch for thrown objects shields while people other people engine is running Moving sharp blades under cover English-8
Summary of the content on the page No. 9
SAFETY Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. General Operation • Read, understand, and follow all instructions on the machine and in the manual before sta
Summary of the content on the page No. 10
SAFETY • Do not operate the machine while under the infl uence of alcohol or drugs. • Watch for traffi c when operating near or crossing roadways. • Use extra care when loading or unloading the machine into a trailer or truck. • Always wear eye protection when operating machine. • Data indicates that operators age 60 years and above are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to
Summary of the content on the page No. 11
SAFETY Personal Safety Equipment WARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment. • Make sure that you have fi rst aid equipment close at hand when using the machine. • Never use the machine when barefoot. • Always wear protective shoes or
Summary of the content on the page No. 12
SAFETY • Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in. Children Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. • Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator. •
Summary of the content on the page No. 13
SAFETY WARNING! The engine must not be started when the driver’s fl oor plate or any protective plate for the mower deck’s drive belt is removed. Safe Handling of Gasoline To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely fl ammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fuel with the engine running. All
Summary of the content on the page No. 14
SAFETY Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris buildup. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing. • If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting. •
Summary of the content on the page No. 15
SAFETY • Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened, torqued and that the equipment is in good condition. • Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven with defective or unmounted protective plates, protective cowlings, safety switches, or other protective devices. • Do not change the settings of governors and avoid running the engine with overly high engin
Summary of the content on the page No. 16
SAFETY • The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. • Check the parking brake’s functionality regularly. Adjust and service as necessary. • The mulch blades should only be used in familiar areas when higher quality mowing is desired. • Reduce the risk of fi re by removing grass, leaves, and other debris that may have accumulated on the machine. Allow the machine to cool before putting it in storage. • Regularly clean de
Summary of the content on the page No. 17
MAINTENANCE Maintenance Schedule The following is a list of maintenance procedures that must be performed on the machine. For those points not described in this manual, visit an authorized service workshop. An annual service carried out by an authorized service workshop is recommended to maintain your machine in the best possible condition and to ensure safe operation. Read “Maintenance” in the Safety Instructions section. = Described in this manual = Not described in this manual At Dail
Summary of the content on the page No. 18
MAINTENANCE Deck belt Deck belt removal Park on a level surface. Apply park brake.Lower the deck into the lowest cutting position. 1. Remove foot plate and belt shields. 2. Using a ratchet and socket on the spring idler bolt, relieve the tension on the belt. 3. Remove any dirt or grass that may have accumulated around the cutter housings and entire deck surface. 4. Carefully roll the belt over the top of the cutter housing pulleys. 8011-622 5. Remove the belt from around the electric clutch
Summary of the content on the page No. 19
MAINTENANCE Cutting Blades IMPORTANT INFORMATION In order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged. The sharpening of blades should be carried out by an authorized service workshop. WARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. Bent or cracked blades or blades with large nicks should be replaced. Damaged blades should be replaced when hitting obstacles that result
Summary of the content on the page No. 20
MAINTENANCE To adjust anti-scalp rollers Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti- scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions. Tunnel Deck - The anti-scalp rollers can be set in three positions: • Upper position 1½" to 3" / 38 to 76 mm grass. • Middle position 3" to 4½" / 76 to 114 mm grass. • Lower positi
