Summary of the content on the page No. 1
Harrier 48/56 BBC
CODES
493F & 563F
OWNER’S HANDBOOK
Original Version (EN)
ISSUE: 20.12.10 PART NUMBER: 111-3782 (B)
Summary of the content on the page No. 2
CONTENTS Contents 2 - Grassbag 9 - Without Grass Collection 9 Introduction 3 - Heavy Growth 9 - Blade Brake Clutch 9 Specifications / Main Features 4 - Non-Grassed Areas 9 - Maintenance Schedule 10 Safety Precautions 5 - 6 - Safety Alert Symbol 5 Mower Maintenance 10 - 13 - Training 5 - Carburettor Adjustments 10 - Preparation 5 - Oil Service 10 - Safety Symbols 5 - Air Cleaner Service 10 - Operation 5 - 6 - Spark Plug Service 11 - Maintenance & Storage 6 - Keeping Engine Clean 11 - Control S
Summary of the content on the page No. 3
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you Use of non standard parts or any arbitrary modifications carried out on this machine may gain safe and efficient service from your machine. relieve Hayter Limited of liability for any resulting damage or injury. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it Hayter mowers are robustly constructed and designed for efficient economical perform- gives essential inform
Summary of the content on the page No. 4
SPECIFICATIONS / MAIN FEATURES Code 493 563 Engine Briggs & Stratton Briggs & Stratton Engine type Series 650 Series 850 Engine / Cutterbar Speed 2750 rpm 2750 rpm Fuel type Unleaded petrol Unleaded petrol Fuel capacity 1.5 litres 1.5 litres Oil type SAE 30 engine oil SAE 30 engine oil Oil sump capacity 0.6 litres 0.6 litres Cutting width 480mm 560mm Cutting height 13 - 60mm 13 - 60mm Overall dimensions 1080 x 507 x 1510mm 1080 x 585 x 1510mm Weight 51 Kg 51 Kg 11 12 10 9 1. Spark Plug Lea
Summary of the content on the page No. 5
SAFETY PRECAUTIONS Safety Alert Symbol Preparation Operation This safety alert symbol indicates important safety While mowing, always wear substantial footwear and long Do not operate the engine in a confined space where messages. When you see this symbol be alert to the trousers. Do not operate the equipment when barefoot or exhaust fumes (carbon monoxide) can collect. possibility of injury. Carefully read the following and wearing sandals. Always pull the starter cord slowly until resistanc
Summary of the content on the page No. 6
SAFETY PRECAUTIONS - Before cleaning/checking or working on the ma- To reduce the fire hazard, keep the engine and the Operation cont chine. surrounding deck area free of grass, leaves, or excessive Never operate the machine with defective guards, or with - After striking a foreign object. Inspect the machine grease. out safety devices, for example deflectors and/or grass for damage and ensure necessary repairs are made bag in place. before re-starting and operating. Check the rear de
Summary of the content on the page No. 7
ASSEMBLING THE MOWER BEFORE FIRST USE position. Lower the deflector to rest on the grassbag. in quantities that can be used within 30 days. Never mix Delivery Checklist oil with petrol. For added engine protection Briggs & Remove the mower from the packaging and check that Stratton recommend the use of their fuel additive which the following items have been supplied correctly. If any Prevent Engine Damage is available from an authorised Briggs & Stratton service items are missing contact,
Summary of the content on the page No. 8
OPERATING THE MOWER forward. If the blade stop lever is released the blade will stop. Controls (1) Pull the blade stop lever back against the handlebar at (Ref fig. 10) Operate all control levers several times and ensure that the same time, and hold in position. To stop the engine, pull the throttle lever to the stop posi- the cables move freely. Check that the engine stop and (2) To engage the (BBC) cutterblade first push the actuat- tion. (Ref fig. 10 & 11) ground drive clutch levers return
Summary of the content on the page No. 9
OPERATING THE MOWER Slopes Grassbag Blade Brake Clutch To prevent engine damage do not use the mower on Raise the rear deflector and lift the grassbag and lower A device in the blade brake clutch helps minimise the rear deflector to rest against the rear of the mower. damage to the cutting mechanism when a hidden slopes greater than 20 degrees. (Refer fig.13) obstruction or overload is encountered. When the To empty the grassbag, pour out the grass clippings and obstruction or overload is rem
Summary of the content on the page No. 10
MAINTENANCE SCHEDULE / MOWER MAINTENANCE their outer casing. Change the engine oil after the first 5 hours of operation Maintenance Schedule - Check the clutch cable adjustment. and thereafter according to the ‘Maintenance Schedule’:- Follow the hourly or calendar intervals, whichever occurs - Sharpen the cutterblade. 1. Drain fuel by running the engine until the fuel tank is first. More frequent service will be required if working for empty. prolonged periods under dusty, dry conditions,
Summary of the content on the page No. 11
MOWER MAINTENANCE after use and check its condition for signs of damage. Spark Plug Service To prevent accidents replace a damaged grassbag Use only Briggs & Stratton (Part number 19368) spark immediately. (Refer fig.28) tester (1) to check for a spark as shown in the diagram. (Refer fig.25) Replace the spark plug every 100 hours or every season, Deck Housing whichever occurs first. A spark plug wrench is available Remove grass debris from the top and underside of the from any authorised B
Summary of the content on the page No. 12
MOWER MAINTENANCE cables at the point of entry and exit from their outer cas- Clutch Cable Adjustment ing. Regularly check that the bolt securing the cutterblade is At any time the operator feels that the machine is loosing tightened to the specified torque of 55Nm. drive: 1. Stop the engine. Cutterblade Removal Replace the cutterblade every 2 years of sooner if Drain the fuel by running the engine until the fuel tank excessively worn or damaged. 2. Pull the machine backwards at the same tim
Summary of the content on the page No. 13
MOWER MAINTENANCE Engines stored in excess of 30 days need to be protected Cutterblade Sharpening with Briggs & Stratton fuel additive or drained of fuel to A slightly worn cutterblade may be re-sharpened. Both prevent gum from forming in the fuel system or on essen- blade edges must be sharpened equally to ensure balance. tial carburettor parts. To ensure your mower is maintained Sharpen the cutterblade every 25 mowing hours or more in good working order it is important that the followin
Summary of the content on the page No. 14
LAWN CARE CALENDAR To be used as a guide only January June October There is very little work to do this month apart from Summer mowing should now be under way. It should be Rake out the thatch from the turf and spike the lawn to brushing away leaves. Keep off the grass if frozen or necessary to mow the lawn twice a week. Raking before assist in drainage. Brush in peat and sharp sand. mowing is important this month as the combined action waterlogged. keeps runners of clover under control. Wat
Summary of the content on the page No. 15
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION 1. Engine stop lever released 1. Operate engine/blade stop Discharge chute blocks 1. Grass is wet 1. Mow dry grass lever 2. Cut height is too low 2. Increase cut height Engine will not turn 2. Incorrect oil level 2. Check oil level 3. Grassbag full 3. Empty grassbag over 3. Obstruction under deck 3. Remove obstruction 4. Airflow through the grassbag 4. Clean the grassbag 4. Battery discharged (if fitted) 4.
Summary of the content on the page No. 16
WARRANTY NOTES LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of the warranty, the warranty regis
Summary of the content on the page No. 17
NOTES NOTES 17
Summary of the content on the page No. 18
NOTES NOTES 18
Summary of the content on the page No. 19
NOTES NOTES 19
Summary of the content on the page No. 20
CUSTOMER INFORMATION SERVICE RECORD CODE SERIAL NO. 1st Y ear (12 months ) 1st Y ear (12 months ) Owner ’s Name : We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Engine Type:- Engine:- Date of Sale:- Your Local Dealer:- Note for dealer : Please retain this voucher for your records. 2nd Y ear (24 months ) 2nd Y ear (24 months ) Owner ’s Name : We certify that this serv
