Dixon 3361 user manual

Summary of the content on the page No. 1

DIXON INDUSTRIES, INC. A
BLOUNT COMPANY AIRPORT

INDUSTRIAL PARK
PO BOX 1569
COFFEYVILLE KS 67337 0945
3162512000
FAX 316 251 4117



TECHNICAL DATA BROCHURE
ZTR Model 3361
IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS
SEAT ADJUSTMENT
1. Pull or lift body retention latch P/N 3954 from
transaxle backing plate, raise and push body
and seat assembly forward.
2. Loosen four seat adjustment bolts
P/N 3227 and slide seat forward or backward
to de

Summary of the content on the page No. 2

BODY REMOVAL 1. The 3361 has a two-piece polyethylene body. The upper body can be folded forward to expose the transaxle. In some cases, it may be necessary to remove the upper body to service the transaxle. 2. To remove upper body, remove two bolts P/N 3093 from the front of upper body hinge located on the brake shaft P/N 9283. Disconnect seat switch P/N 4761 at plug-in. 3. Reverse above procedure to reinstall. ADJUSTMENT OF MOWER DECK DRIVE BELT Belt tension is controlled and adj

Summary of the content on the page No. 3

MOWER BLADE OPERATION 1. To start mower blades, pull up slightly on blade drive switch handle and move it forward to the "ON" position. 2. To stop mower blades, move switch handle to th e "OFF" position SAFETY CHECKS IMPORTANT - PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS 1. After reassembly, while seated on mower, attempt to start engine with mower deck engaged. Engine should /VO7"start. If engine does start, return the mowerto an Authorized Dixon dealer for a

Summary of the content on the page No. 4

3361 BODY ASSEMBLY

Summary of the content on the page No. 5

Page 5 of 8 3361 CHASSIS ASSEMBLY

Summary of the content on the page No. 6

Page 6 of 8 3361 TRANSAXLE ASSEMBLY

Summary of the content on the page No. 7

Page 7 of 8 3361 MOWER DECK ASSEMBLY 36"

Summary of the content on the page No. 8

Page 8 of 8 3361 WIRING ASSEMBLY