Summary of the content on the page No. 1
Owner's Manual
ICRAFT, MnN ,I
LAWN TRACTOR
17.5 HP, 42" Mower
Electric Start
6 Speed Transaxle
Model No.
917.272673
_] his product has a low emission engine which operates
differently from previously built engines. Before you start the
engine, read and understand this Owner's Manual.
IMPORTANT:
For answers to your questions
Read and follow all Safety about this product, Call:
Rules and Instructions before
1-800-659-5917
Sears Craftsman Help Line
operating this equipment.
5 am - 5 pro, Mon- Sat
S
Summary of the content on the page No. 2
Maintenance ......................................... 17 Warranty ................................................. 2 Safety Rules ........................................... 3 Service and Adjustments ...................... 21 Product Specifications ............................ 5 Storage ................................................. 27 Assembly/Pre-Operation ........................ 8 Troubleshooting .................................... 28 Operation ..........................................
Summary of the content on the page No. 3
IMPORTANT: This cutting machine is capable of amputating hands and feet and throw- ing objects. Failure to observe the following safety instructions could result in serious injury or death. • Be aware of the mower discharge direc- _WARNING" In order to prevent ac- tion and do not point it at anyone. Do cidental starting when setting up, trans- not operate the mower without either porting, adjusting or making repairs, the entire grass catcher or the guard in always disconnect spark plug wire and
Summary of the content on the page No. 4
DO: • Never carry children. They may fall off • Mow up and down slopes, not across. and be seriously injured or interfere with • Remove obstacles such as rocks, tree safe machine operation. limbs, etc. • Never allow children to operate the • Watch for holes, ruts, or bumps. Un- machine. even terrain could overturn the machine. • Use extra care when approaching blind Tall grass can hide obstacles. corners, shrubs, trees, or other objects • Use slow speed. Choose a low gear that may obscure vision
Summary of the content on the page No. 5
" Be sure the area is clear of other people • Remove obstacles such as rocks, tree before mowing. Stop machine if anyone limbs, etc. enters the area. • Watch for holes, ruts, or bumps. Uneven • Never carry passengers or children terrain could overturn the machine. Tall even with the blades off. grass can hide obstacles. • Do not mow in reverse unless abso- • Use slow speed. Choose a low gear lutely necessary. Always look down and so that you will not have to stop or shift behind before and while
Summary of the content on the page No. 6
REPAIR PROTECTION NGRATULATIONS on your purchase I new tractor. It has been designed, AGREEMENTS ]ineered and manufactured to give Congratulations on making a smart pur- the best possible dependability and chase. Your new Craftsman_ product is formance. designed and manufactured for years of _uld you experience any problem you dependable operation. But like all products, mot easily remedy, please contact a it may require repair from time to time. That's _rs or other qualified service center. whe
Summary of the content on the page No. 7
Steering Wheel @ Steering Wheel Insert (1) Large Flat Washer @ @ (1) Locknut 1/2-20 (1) Hex Bolt 1/4-28 x 1-1/4 (1) Locknut 1/4-28 Steering J__ Steering Wheel Extension Adapter Shaft I I Boot I i Seat (1) Washer @ 17/32 x 1-3/16 x 12 Gauge _] (1) Knob _Drain Tub_ For Future Use Video Cassette Slope Sheet Keys F-7 (2) Keys "-t 7
Summary of the content on the page No. 8
Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. Review the video cassette before you begin, TOOLS REQUIRED FOR "_, _lnsert ASSEMBLY • . _o _ _,_ A socket wrench set will make assembly t12HexNut easier. Standard wrench sizes you need -- ',-_-_ L
Summary of the content on the page No. 9
NOTE: You may now roll or drive your 5. Pivot seat and pan forward and as- tractor off the skid. Follow the appropriate semble adjustment knob and flat instruction below to remove the tractor washer loosely. Do not tighten. from the skid. 6. Lower seat into operating position and sit in seat. TO ROLLTRACTOR OFF SKID (See 7. Slide seat until a comfortable position Operation section for location and is reached which allows you to press function of controls) clutch/brake pedal all the way down. 1.
Summary of the content on the page No. 10
INSTALL MULCHER PLATE CHECK FOR PROPER POSITION OF ALL BELTS (If previously removed) 1. Raise and hold deflector shield in See the figures that are shown for replac- upright position. ing motion and mower blade drive belts in the Service and Adjustments section 2. Place front of mulcher plate over front of this manual. Verify that the belts are of mower deck opening and slide into place, as shown. routed correctly. 3. Hook front latch into hole on front of CHECK BRAKESYSTEM mower deck. After you
Summary of the content on the page No. 11
These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. R N H L I\1 REVERSE NEUTRAL HIGH LOW CHOKE FAST SLOW IGNITION ENGINE OFF LIGHTS ON ENGINE ON ENGINE START PARKING BRAKE PARKING BRAKE PARKING BRAKE LOCKED UNLOCKED a OVER TEMP FUEL OIL PRESSURE BATTERY REVERSE FORWARD MOWER HEIGHT MOWER LIFT LIGHT ATTACHMENT ATTACHMENT KEEP AREA CLEAR eLOPE HAZARDS DANGER, KEEP HANDS CLUTCH ENGAGEO CLUTCH 01SENGAGEO AND FEET AWAY (SEE SAFETY R
Summary of the content on the page No. 12
KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Ignition Switch Light Switch Attachment Position Clutch Lever Ammeter ift Lever Plunger Attachment Throttle/Choke Lift Lever Control o Height Clutch/Brake Adjustment Pedal Lever Brake Lever Gearshift Lever Our tractors conform to the safety standa
Summary of the content on the page No. 13
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. HOW TO USE YOUR TRACTOR IMPORTANT: Leaving the ignition switch in any position other than "STOP" will TO SET PARKING BRAKE cause the battery to discharge and go Your tractor is equippe
Summary of the content on the page No. 14
• The average lawn should be cut to ap- • To restart movement, slowly release proximately 2-1/2 inches during the cool parking brake and clutch/brake pedal. season and to over 3 inches during hot • Make all turns slowly. months. For healthier and better looking TO TRANSPORT lawns, mow often and after moderate • Raise attachment lift to highest position growth. with attachment lift control. • For best cutting performance, grass over • When pushing or towing your tractor, 6 inches in height should
Summary of the content on the page No. 15
ADD GASOLINE WARM WEATHER STARTING (50' F and • Fill fuel tank to bottom of filler neck. Do above) not overfill. Use fresh, clean, regular 6. When engine starts, move the throttle unleaded gasoline with a minimum of control to the fast position. 87 octane. (Use of leaded gasoline will • The attachments and ground drive can increase carbon and lead oxide deposits now be used. If the engine does not and reduce valve life). Do not mix oil accept the load, restart the engine and with gasoline. Purch
Summary of the content on the page No. 16
MOWING TIPS MULCHING MOWING TIPS • Mower should be properly leveled for IMPORTANT: For best performance, keep best mowing performance. See "TO mower housing free of built-up grass and LEVEL MOWER HOUSING" in the trash. Clean after each use. Service and Adjustments section of this • The special mulching blade will recut manual. the grass clippings many times and • The left hand side of mower should be reduce them in size so that as they fall onto the lawn they will disperse into used for trimming
Summary of the content on the page No. 17
AS YOU COMPLETE _,0_.' %_ £_3-_/ _ _R'_ _,_ £5 R_ o OU AOS v,c ChockBrakeOper°t,on Check Tire Pressure Check Operator Presence and T Interlock Systems If R Check for Loose Fasteners _ I_s I# # A Sharpen/Replace Mower Blades 11_3 O Check Battery Level C Lubrication Cha_ t_" l/ R Clean Battery and Terminals Check Transaxle Cooling V f Check V-Belts Check Engine Oil Level if V I Change Engine Oil (with oil filter) 1_1,2 I1_ v' E Change Engine Oil (wilhout oil tilter) 1_,.2 N Clean Air Filter G Cl
Summary of the content on the page No. 18
4. Reassemble blade bolt, lock washer TRACTOR and flat washer in exact order as shown. Always observe safety rules when per- 5. Tighten blade bolt securely (27-35 Ft. forming any maintenance. Lbs. torque). BRAKE OPERATION IMPORTANT: Blade bolt is grade 8 heat If tractor requires more than six (6) feet treated. stopping distance at high speed in highest gear, then brake must be adjusted. (See Trailing "TO ADJUST BRAKE" in the Service and Edge Up Adjustments section of this manual). TIRES • Mainta
Summary of the content on the page No. 19
NOTE: The original equipment battery on TO CHANGE ENGINE OIL your tractor is maintenance free. Do not Determine temperature range expected attempt to open or remove caps or covers. before oil change, All oil must meet API Adding or checking level of electrolyte is service classification SF-SJ. not necessary. • Be sure tractor is on level surface. • Oil will drain more freely when warm, TO CLEAN BATTERY AND TERMINALS • Catch oil in a suitable container. Corrosion and dirt on the battery and termi
Summary of the content on the page No. 20
2. Removecover. Screws Blower Housing 3. Carefullyremoveair filter cartridge and Screws pre-cleanerfrom base. 4. Cleanbase carefullyto preventdebris from falling intocarburetor. NOTE:If very dirty or damaged,replace ;teen cartridge. Dipstick Tube 5. Place new pre-cleanerand cartridge Assembly --__ .71 firmly in base. 6. Align tabs on coverwith slots in blower housing and replacecover. 0il Fill 7. Hook handleon coverand push down on handleto close. Plug IMPORTANT: Petroleumsolvents,suchas Engine
