Summary of the content on the page No. 1
Universal
Rechargeable
Battery
MP3300 User Guide
Summary of the content on the page No. 2
Summary of the content on the page No. 3
USER GUIDE Contents Overview ................................................................................................2 Getting Started........................................................................................2 Unpacking myPower ALL ....................................................................2 Getting to Know myPower ALL ..........................................................3 Charging myPower ALL ...................................................................
Summary of the content on the page No. 4
Overview You can use myPower™ ALL—the universal rechargeable battery—to power just about any portable device. Simply connect myPower ALL to your portable DVD player, notebook computer, digital camera, digital camcorder, portable CD player, PDA, mobile phone, or other portable device to extend the battery life. As an added bonus, myPower ALL will charge the internal battery on some devices, while powering the device. myPower ALL goes where you go! Slip the handy leather case onto your belt, or j
Summary of the content on the page No. 5
Getting to Know myPower ALL Voltage Indicators/ Capacity Indicators Voltage Selector Voltage Lock Charging Indicator DC OUT For connection to device DC IN For connection to power adapter Charging myPower ALL myPower ALL will charge in four hours when completely empty. The green CHARGE indicator will turn on after the battery is 80% charged. Therefore, you should view the actual battery capacity before disconnecting the power adapter to stop charging. (Before using myPower ALL for the first time,
Summary of the content on the page No. 6
Using myPower ALL myPower ALL can be used to power and/or charge your portable device. With devices that require higher voltage levels, like notebook computers and portable DVD players, we recommend that you use myPower ALL only to power the device. You will find that powering without charging your higher voltage device will maximize the battery life of myPower ALL, thus letting you use your portable device even longer. To use myPower ALL to power and/or charge your device, take these steps whi
Summary of the content on the page No. 7
3. Connect the adapter plug to the power output cord (but not the device), according to the device polarity: • If the device polarity is center positive, match the Connecting the Plug for a positive symbol (+) on the selected adapter plug to Center Positive Device the positive symbol (+) on the power output cord and connect. • If the device polarity is center negative, match Connecting the Plug for a the positive symbol (+) on the selected adapter Center Negative Device plug to negative symbo
Summary of the content on the page No. 8
2. With the voltage lock in the unlocked position (switched right to VOLTAGE), set the voltage output to the voltage selection that is equal to or one increment higher than the voltage identified for your device. To do this, press the voltage selector until the voltage indicator turns on Sample Device under the appropriate voltage selection (3, 4.5, 5, Specification Label 6, 7.5, 9, 12, 14V). For example, if your device requires 6V, set the voltage to 6. If your device requires 7.2V, set the vo
Summary of the content on the page No. 9
the device. If it is less than 64W, set the voltage on MP3300 to 12V and test to see if it will power your notebook at this setting. If not, increase the voltage to 14V and retest. Most portable DVD players require 9 or 12 volts. Set the voltage to 7.5V and test to see if myPower ALL will power your device at this setting. If not, increase the voltage by one level and retest. Connect the Portable Device 1. Connect the adapter plug into the power jack on the portable device. 2. Turn on the port
Summary of the content on the page No. 10
View myPower ALL Battery Capacity The capacity in myPower ALL will decrease as the battery powers and/or charges your devices. The remaining voltage is shown on the voltage indicator, which is accessed as described below. As the voltage decreases, the lights will turn off in sequence from right to left. When the myPower ALL battery capacity is low, only the red EMPTY light will be on. You should recharge myPower ALL at this time. When myPower ALL is completely out of battery, all lights will be
Summary of the content on the page No. 11
Obtaining Adapters Eight adapter plugs that fit most DC adapter jacks on a variety of portable devices are included with myPower ALL. If none of these plugs fits snugly into your portable device power jack, please go to our web site at www.tekkeon.com/mpadapters to determine which adapter plug you need for your device. You can obtain most adapters through the web site, or by contacting Tekkeon by phone at 888-787-5888 or 1-714-832-1266. If available through Tekkeon, the adapter will be sent to y
Summary of the content on the page No. 12
Troubleshooting If myPower ALL does not power the portable device or charge the device battery, take these steps: 1. Verify that the current consumption of the portable device is not more than 4Amp. If the device consumes more than the maximum provided by myPower ALL, the device will shut down when turned on and cannot be powered and/or charged by myPower ALL. 2. If the device requires a charging voltage greater than 14V, verify that the total output power provided by the device power adapter is
Summary of the content on the page No. 13
7. Verify that a battery is installed in the portable device as some devices will not function without a battery installed. 8. Verify if your device is designed with charging circuitry that limits the input voltage. If so, myPower ALL may not be able to power or charge the device. Limited Warranty The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase. In the event of a defect in operation during the warranty period Tekkeon,
Summary of the content on the page No. 14
Customer Support Customer support for myPower ALL is available at: Tekkeon, Inc. c/o myPower 3002 Dow Avenue, #134 Tustin, CA 92780 888-787-5888 / 714-832-1266 www.tekkeon.com Tekkeon, Inc. must issue a Return Merchandise Authorization (RMA) number for all exchanges or refunds. www.tekkeon.com 12
Summary of the content on the page No. 15
Summary of the content on the page No. 16
www.tekkeon.com © 2005 Tekkeon, Inc. Revision A2 All Rights Reserved myPower™ is a trademark of Tekkeon, Inc.
