Billy Goat SV50 user manual

Summary of the content on the page No. 1

Operator Owner's Manual
1
Thank You for Selecting
SV50, 50H
R
Quiet Vac
3
SPECIFICATIONS
SV50 SV50H
ENGINE: H.P. 6.0 (4.47 Kw ) 5.5 (4.1kW)
ENGINE: TYPE B&S INTEK HONDA OHV
ENGINE: FU EL CAP. 1.6qt. (1.5L) 1.2qt. (1.1L)
ENGINE: OIL CAP. 0.69qt. (0.65L) 0.63qt. (0.60L)
WEIGHT: UNIT 145# (65.8kg) 153# (69.4kg)
WEIGHT: SHIPPING 168# (76.2kg) 176# (79.8kg)
ENGINE WEIGHT: 28# (12.7kg) 36# (16.3kg)
UNIT LENGTH 62" (1.57m) 62" (1.57m)
U NIT WIDTH 26.75" (0.68m) 26.75" (0.68m)
UNIT HEIGHT 42" (1.07m) 42

Summary of the content on the page No. 2

5 IN THE INTEREST OF SAFETY BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL & EN- GINE MANUAL.” THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. WARNING: The Engine Exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. 21. DO NOT touch hot muffler, cylinder, or 13. DO NOT tamper with governor springs,

Summary of the content on the page No. 3

9 GENERAL SAFETY For your safety and the safety of others, these directions should be followed: Do not operate this machine without first reading ·DO NOT operate during excessive vibration. owner's manual and engine manufacturer's manual. ·DO NOT remove bag until engine has been turned off and has come to a complete stop. Use of Ear Protection is recommended while ·DO NOT remove hose kit cap on nozzle until engine has been operating this machine. turned off and has come to a complete stop.

Summary of the content on the page No. 4

Your Billy Goat is shipped from the factory in one carton, completely assembled except for the upper handle 10 ASSEMBLY and accessories. Included with machine are caster kit (890447), felt filter bag (1 each), lawn liner y (3 each), and litter liner (3 each). Read all safety and operating instructions before assembling or starting this unit. 1. REMOVE items 8 locknut & 74 5. 1. screws from lower handle (item 27). Attach and securely tighten upper handle item 6 to lower handle as shown. SEE ENG

Summary of the content on the page No. 5

16 Operation INTENDED USE: This machine is designed for vacuuming 16.3 DEBRIS BAG leaves, grass clippings and other types of organic litter as well as debris mixed with cans, bottles and small amounts Debris bags are normal replaceable wear items. of sand; however, vacuuming cans, bottles and sand will Note: Frequently empty debris to prevent bag overloading with affect the longevity of your machine. more weight than you can lift. Like all mechanical tools, reasonable care must be used

Summary of the content on the page No. 6

18 PARTS DRAWING SV50, SV50H Part No. 890379 Page 6 of 8 Form No. F081398A

Summary of the content on the page No. 7

item PARTS SV50 QTY SV50H QTY 19 Part No. Part No. no. LIST 1 OUTER DEBRIS BAG 890351 1 890351 1 2 THROTTLE CONTROL 850270 1 850270 1 3 ROD BAG 890352 1 890352 1 4 NUT LOCK (1/4 - 20 ) *8160001 17 *8160001 17 5 SCREW CAP ( 1/4 - 20 x 1-1/2 HEX ) *8041008 2 *8041008 2 6 HANDLE UPPER ASS’Y (incl. items 4(4),5(2),45(2),11(2),75(2)) 890439 1 890439 1 * Denotes 7 AXLE HEIGHT ADJUST 890389 1

Summary of the content on the page No. 8

17 MAINTENANCE Use only a qualified mechanic for any For damaged or imbalanced 17.1 IMPELLER REMOVAL impeller adjustments, disassembly or any kind of repair . 1. Wait for engine to cool and disconnect spark plug. 2. Drain fuel and oil from the engine. WARNING: TO AVOID PERSONAL INJURY, ALWAYS TURN 3. Remove engine, impeller and mounting plate by removing nuts MACHINE OFF, MAKE SURE ALL MOVING PARTS COME (item 26) around outside of housing. TO A COMPLETE STOP. 4. Leaving engine fastened to plate