Summary of the content on the page No. 1
Hydraulic
Service Jack
Operating Instructions & Parts Manual
Model number capacity
atd-7333 2-1/2 t on
U.S. Patent No. 5,946,912
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
!
Obey all safety messages that follow this symbol to avoid possible injury or death.
! advertencia
! WARNING
• Leer, comprender, y seguir las instrucciónes antes To avoid crushing and related injuries:
de utilizar el aparato.
never work on, under or around a
• El man
Summary of the content on the page No. 2
SaFetY and GeneraL inFOrMatiOn Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native
Summary of the content on the page No. 3
SPeciFicatiOnS Min. Max. Saddle Model Capacity Jack Size (L x W x H) Height Height Dia. Atd-7333 2-1/2 Ton 25-3/8" x 13-1/8" x 6-1/2" 5" 19-1/2" 5" OPeratiOn Lifting Only attachments and/or adapters supplied by the manufacturer shall be used. Lift only on area of the ! vehicle as specified by the vehicle manufacturer. 1. Follow the vehicle manufacturer’s recommended guidelines for lifting. Engage the emergency brake and chock each unlifted wheel in both directions to preven
Summary of the content on the page No. 4
! WARNING ! WARNING • Study, understand, and follow all printed materials provided with/on this product before use. X • do not exceed rated capacity. • Use only on hard, level surface. To avoid crushing and related injuries: • this is a lifting device only! • never work on, under or around a load supported • immediately after lifting, support the load with only by hydraulic jack. a pair of appropriately rated jack stands. • always use adequately rated jack stands. • Lift only on ar
Summary of the content on the page No. 5
trOUBLeSHOOtinG Symptom Possible causes corrective action Jack will not lift load • Release valve not tightly closed • Ensure release valve tightly closed • Load is too heavy • Consider higher capacity jack Jack will lift, but not maintain • Release valve not tightly closed • Ensure release valve tightly closed pressure • Hydraulic unit malfunction • Discontinue use, contact ATD Tools technical service Jack will not lower after unloading • Reservoir overfilled • Drain fluid to proper level •
Summary of the content on the page No. 6
replacement Parts illustration for model atd-7333 7 6 8 3 4 10 6 23 5 11 19 9 H K 12 G 2 I A J B C 1 D E C F 20 14 15 21 15 13 16 17 18 22 Figure 2 - Replacement Parts Illustration for Model Atd-7333 6
Summary of the content on the page No. 7
replacement Parts List for model atd-7333 Item Part No for Atd-7333 Description Qty 1 F36100-0001 Oil Filler Plug 1 2 G48900-0023 Pump Piston 1 3 G48900-0017 Release Valve Connecting Bar 1 4 G48900-0016 Release Valve Gear 1 5 G59305-0003 Nut M10 1 6 G59305-0005 Lock Washer f10 2 7 G48900-0024 Bolt M10x16 1 8 G48900-0001 Return Spring, Handle Fork 1 9 G48900-0015 Pin 1 10 G58900-0002 Handle Fork 1 11 G48900-0011 Return Spring 2 12 G59508-0004 Saddle 1 13 G48900-0018 Handle Bolt, Left 1 14 G48900-
Summary of the content on the page No. 8
Notes note Page atd t ools inc. 160 Enterprise Drive, Wentzville, MO 63385 Tel: (636)327-9050 Fax: (636)327-9046 www.atdtools.com 8
