Summary of the content on the page No. 1
Installation Guide & Hardware Manual
Model: DTK-2100
Summary of the content on the page No. 2
® Wacom Cintiq 21UX Installation Guide & Hardware Manual Version 1.0, Rev A1910 Copyright © Wacom Co., Ltd., 2010 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the right to change any specifications and product configuratio
Summary of the content on the page No. 3
INTRODUCTION AND OVERVIEW ® ® The Wacom Cintiq interactive pen display combines the benefits of a Liquid Crystal Display (LCD) with the control, comfort, and productivity of Wacom’s cordless, battery-free pen technology. This gives you a direct pen-on-screen interface for your computer. The basic components of your Cintiq include a Wacom pen tablet internally mounted behind a TFT color display, the Wacom Grip Pen, and a modular display stand. This manual describes the installation and use of
Summary of the content on the page No. 4
PRECAUTIONS ON USE AND HANDLING To ensure the safe usage of your product, be sure to follow all instructions, cautions, and warnings found within this manual. Failure to do so could cause the loss of data or damage to your computer. Failure to do so could also void your warranty, in which case Wacom shall have no responsibility to repair or replace the product. This symbol indicates an item that, if disregarded, may lead Warning to loss of human life or serious injury. This symbol indicate
Summary of the content on the page No. 5
USAGE Only use a power adapter specified for use with your Cintiq. If a different type of power Warning adapter is used, Cintiq will not work properly or may be damaged. Using a different type of power adapter also has the potential to result in fire. Use of a different power adapter will void your warranty. Be sure to use a grounded power source when applying power to Cintiq. Caution Do not connect or disconnect the video or power cables while Cintiq or your computer are Caution turned
Summary of the content on the page No. 6
If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking from it; Warning this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse immediately with running water for at least 15 minutes or more. If contact is made with the eyes or mouth, also consult a physician. Warning Hg – LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. The pen display has a backlight which contains
Summary of the content on the page No. 7
Do not expose Cintiq to high voltage electrostatic discharges or to a build-up of an Caution electrostatic charge on the LCD screen. This may result in a temporary discoloration and blotching of the display. If discolorations occur, leave the display on and the discolorations should disappear within a few hours. Reuse, recycling and recovery. You are urged to recycle this product when replacing it with a newer product or when it has outlived its useful life by bringing it to an appropriat
Summary of the content on the page No. 8
TABLE OF CONTENTS INTRODUCTION AND OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 PRECAUTIONS ON USE AND HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Physical location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 9
CUSTOMIZING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Opening the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Learning more about Cintiq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Customization basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 10
Ordering parts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Available parts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 Radio and television interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 FCC notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Industr
Summary of the content on the page No. 11
UNPACKING YOUR CINTIQ Carefully unpack and place all items on a stable surface. Verify that contents are complete. The product parts and accessories are packed together in the accessories box. To avoid damage, see the instructions on the following pages before setting up and using Cintiq or the Cintiq stand. Cintiq interactive pen display, Cintiq stand (MST-A155) with attached cabling *Patented Pen stand, includes replacement nibs and nib extraction tool (PST-A042-02) Rotation lock screws
Summary of the content on the page No. 12
SETTING UP THE CINTIQ STAND Place the stand on your desktop or work surface. Make sure the stand is stable and will not tip or fall when the pen display is mounted on it. Then familiarize yourself with the stand components. Do not operate the incline adjustment levers when Cintiq is not mounted on the stand, and do Warning not lift the stand by the adjustment levers. The stand is spring-loaded and may cause injury or damage if released without the weight of Cintiq on the stand. Improper o
Summary of the content on the page No. 13
UNPACKING AND MOUNTING THE CINTIQ PEN DISPLAY Remove any packing materials from the back of the display unit and cabling. Mount Cintiq on the stand: � Make sure the stand is placed in a stable position on your desktop or other work surface so that it will not tip or fall when Cintiq is mounted on it. Securely grasp Cintiq with both hands; the display should face toward you, with the power switch and LEDs located at the top. � Align Cintiq parallel to the front of the stand so the bearing hub
Summary of the content on the page No. 14
When operating the incline adjustment levers, Warning Cintiq must be mounted on the stand with the stand feet resting on a stable, flat surface. The stand is spring-loaded and can snap back quickly, causing injury or damage if not – B – operated properly. After the display unit has been mounted on the stand, remove the foam blocks that lock the adjustment levers in place. Save these blocks with the other packaging materials; you will need them if in the future you want to ship Cintiq
Summary of the content on the page No. 15
ADJUSTING ROTATION To adjust rotation, grasp Cintiq by the main body and rotate the unit to the desired position; it will move on the bearing hub. Cintiq can be rotated on the display stand when the incline is less than or equal to 25 degrees. You can only rotate the pen display 180 degrees in either direction. If you do not plan to rotate the pen display, use the rotation lock screws and fasten the display to the stand in a horizontal position. See “Optional display configurations” on p
Summary of the content on the page No. 16
YOUR CINTIQ INTERACTIVE PEN DISPLAY After the Cintiq pen display is safely mounted on the Cintiq stand, take some time to familiarize yourself with the features and components of your product. The display and tablet sensor function as an integrated output and input device. The tablet sensor reports pen coordinates, pressure, tilt, switch, eraser, and other information. FRONT VIEW Status LED Power switch Power LED Lights blue when pen is in active area of Turns unit on or off. Lights blue when
Summary of the content on the page No. 17
REAR VIEW On Screen Display (OSD) controls Integrated pen holder and alternate cable exit Use these controls to adjust a variety The pen can be stored here. If you are not of display settings. See “Adjusting the using the Cintiq stand supplied with the unit, display” on page 38. you can route the cable to exit from this location. See “Using an alternate mount or Digital/Analog (DVI/VGA) switch stand” on page 62. Set this switch for the video connection you will be using. Bearing hub Touc
Summary of the content on the page No. 18
PEN FEATURES Eraser: When brought within proximity of the pen display (5 mm (0.2 inch)), the tablet portion of the display reports the pen location. Pressure information is reported as you press down on the eraser. By default, the eraser function is set to ERASE. DuoSwitch: Be sure the programmable switch is in a convenient location where you can toggle it with your thumb or forefinger but not accidentally press it while using the pen. You can use the switch whenever the pen tip is with
Summary of the content on the page No. 19
INSTALLATION The computer treats the interactive pen display as two separate devices (the display and the pen tablet). Therefore, the installation process is completed in two stages: � First install as a display. � Then install as a pen tablet. Both stages require hardware and software installations and adjustments. Carefully follow ALL instructions. Important: You MUST install the Wacom driver software for correct pen-on-screen functionality. SYSTEM REQUIREMENTS Make sure your computer meet
Summary of the content on the page No. 20
STEP 1: DISPLAY INSTALLATION In this step, Cintiq is installed as a display on your system. Important: Never connect or disconnect the video or power cables while your computer or pen display are powered on. This can damage the display or video card. 1. Turn off your computer. 2. If your computer has only one video connector, unplug your previous monitor or add a second video card. Determine if your computer has a digital (DVI) or analog (VGA) connector, and set the DVI/VGA switch located o
