Summary of the content on the page No. 1
Warning!
Safety Precautions
• In order to avoid the risk of fire or electric shock DO NOT expose the
LINDY LCD Terminal
device to liquid or a high humidity environment.
• Operate the LCD only at temperatures between +5°C and +45°C.
• There are no user serviceable parts. Qualified specialists must carry
User Manual
out repairs only.
• The notes and instructions regarding this device must be observed.
• This device should always to be placed upon a solid horizontal
surface.
• Only clean with neutr
Summary of the content on the page No. 2
User Manual KVM Terminal LCD User Manual KVM Terminal LCD CHAPTER 1 KVM Terminal LCD INSTALLATION CONTENTS: CHAPTER 1 KVM Terminal LCD INSTALLATION 1-1 INSTALLING THE DRAWER INTO A 19” CABINET 1-1 INSTALLING THE TERMINAL INTO A 19” CABINET....…………… 4 1-2 OPENING THE LCD DISPLAY DRAWER……………….…………. 4 1. Fix the front side panel onto the front side of your 19” cabinet 2. Fix the screws in the back onto the rear side of your 19” Cabinet. The mounting 1-3 CLOSING THE LCD DISPLAY DRAWER….………………….……..
Summary of the content on the page No. 3
User Manual KVM Terminal LCD User Manual KVM Terminal LCD CHAPTER 2 LCD DISPLAY 3. Carefully lift the LCD 2-1 Video Input Pin Assignment display into a suitable viewing position. Now The KVM Terminal LCD uses a standard DDC compatible 15-pin VGA connector. gently slide the drawer back to a comfortable position. 2-2 The Display Timing Applicable video timing: The following table lists the display modes best suited for use with the LCD display. If you choose a video mode which is not listed then t
Summary of the content on the page No. 4
User Manual KVM Terminal LCD User Manual KVM Terminal LCD 2-3 The Display Controls 2-5 Main Menu The OSD main menu is displayed on screen when 3 key is pressed. The OSD menu is a combination of graphic and text display. The bottom line of the main menu shows the Display Controls current selected or active menu item. The adjust (+) and adjust (-) keys are used to scroll through items within the menu. The selected item is highlighted as the scrolling move along. The 3 key is used to close the sub-
Summary of the content on the page No. 5
User Manual KVM Terminal LCD User Manual KVM Terminal LCD LINE WRITE Test display 2-8 Clock The item "Clock” is used to adjust the number of clocks (pixels) SCALE UP Don't care per line (sample per line). A slider with current value is displayed. FLT EDGE FLITER Adjust the image sharpness CLOC K MISC FUNC Adjust the image colour OSD OSD ADJUST Set up OSD position and size CONTRAST Sets the contrast of the display 0125 250 BRIGHTNESS Sets the brightness of the display EXIT EXIT Exit the menu and
Summary of the content on the page No. 6
User Manual KVM Terminal LCD User Manual KVM Terminal LCD 2-11 Expand 2-14 Recall The main menu "Expand" is used to adjust display size, select the The item "Recall" is used to set the LCD to the default values. "Yes" sets sub-menu, zoom "In/Out" to adjust the display size from -15 to 15. the horizontal, vertical, phase, clock to default values. EXPAND RECALL 1:1 FULL SCREEN YES NO ASPECT RATIO ZOOM IN/OUT 2-15 Clear EEPROM The item "Clear EEPROM" is used to set the EEPROM to factory RETURN defa
Summary of the content on the page No. 7
User Manual KVM Terminal LCD User Manual KVM Terminal LCD 2-17 Edge Filter 2-19 OSD Adjust The main item "Edge Filter" is used to adjust the sharpness of the display. The range of the adjustment is -63 to 63. OSD OSD ADJUST FLT EDGE FILTER OSD H POSITION OSD V POSITION OSD BLENDING OSD FONT SIZE -63 1 63 RETURN OSD H Position 2-18 MISC FUNC The item "OSD H Position” is used to adjust the OSD menu horizontal position. The range of the adjustment value is 0 to 255. MISC FUNC ADC R GAIN OSD V Posit
Summary of the content on the page No. 8
User Manual KVM Terminal LCD RadioFrequency Energy, Certifications 2-21 Brightness Shielded cables must be used with this equipment to maintain compliance with radio frequency The main menu item "Brightness" is used to adjust the brightness energy emission regulations and ensure a suitably high level of immunity to electromagnetic of the panel. A slider with current brightness value is displayed. disturbances. The range of brightness adjustment value is 0 to 255. FCC Compliance Statement (United
