Summary of the content on the page No. 1
U5047A PAG QUASAR INSTRUCTION MANUAL U5047A PAG QUASAR INSTRUCTION MANUAL
SECTION 1
SAFETY
1.1 This manual contains important safety and operating instructions.
Please read these fully and note all warnings before using the charger.
Please follow all instructions and retain this manual for future
reference.
1.2 PAG Quasar chargers are not intended for any use other than the
charging of batteries and the powering of broadcast cameras as
detailed in Section 2 , Specification, Page 3.
1.3 IMPORTANT
Summary of the content on the page No. 2
U5047A PAG QUASAR INSTRUCTION MANUAL U5047A PAG QUASAR INSTRUCTION MANUAL 1.10 Refer all servicing to qualified service personnel. Servicing is required ◗ Non-PAG batteries (other than Ni-Cd or Ni-MH) using appropriate when the apparatus has been damaged in any way, such as the supply PAG Intelligent Charge Adaptor. cord or plug has been damaged, liquid has been spilled, the apparatus has been exposed to rain or moisture, does not operate normally, or 2.3 Battery Connections: has been dropped. I
Summary of the content on the page No. 3
U5047A PAG QUASAR INSTRUCTION MANUAL U5047A PAG QUASAR INSTRUCTION MANUAL ◗ Self-adjusting Maintenance Charge (not applied to PAG Li-Ion ◗ EMC Directive 89/336/EU. batteries). ◗ Low Voltage Directive 73/23/EU. 2.7 Self Test Program: 2.16 Operating Temperature Range: The internal microcomputer constantly monitors the battery under 0ºC to 40ºC (+32ºF to +104ºF). charge or process as well as the operation of the charger’s own functions which will be shut down to a safe condition should any of 2.17
Summary of the content on the page No. 4
U5047A PAG QUASAR INSTRUCTION MANUAL U5047A PAG QUASAR INSTRUCTION MANUAL WAIT/°C Alternate Waiting - battery too hot or cold SECTION 4 CHRG/NiMH Alternate Charging of PAG NMH in progress OPERATING INSTRUCTIONS CHRG/Liion Alternate Charging of PAG Li-Ion in progress (or other Li-Ion via PAG Intelligent Charge Adaptor). 4.1 POWERING UP Connect the charger to a suitable supply using the standard lead 4.3 THE FUNCTION BUTTON supplied. The LCD screen will illuminate and briefly display the PAG Opera
Summary of the content on the page No. 5
U5047A PAG QUASAR INSTRUCTION MANUAL U5047A PAG QUASAR INSTRUCTION MANUAL reputable manufacture, having nominal voltages of between 4.8V and indicate the rate by flashing ‘AU’ and the charge rate (2A or 3A) 14.4V, and nominal capacities of between 5Ah and 8Ah. Batteries alternately. PAG intelligent batteries control their own charge rate, with a capacity in excess of 8Ah will not be fully charged. and are identified separately. Charging will then automatically commence. A ‘CHRG’ indication will
Summary of the content on the page No. 6
U5047A PAG QUASAR INSTRUCTION MANUAL U5047A PAG QUASAR INSTRUCTION MANUAL 4.8 SUPPLY FAILURE The charger will not attempt to process batteries which produce a 'FAIL' If the AC mains power fails during operation, the charger will shut indication, or which have completed a program. If a battery is discon- down safely; no damage will occur to either the charger or the nected, the status will revert to the 'ABST' state. Another battery can batteries. now be connected to the free channel without affe
Summary of the content on the page No. 7
U5047A PAG QUASAR INSTRUCTION MANUAL U5047A PAG QUASAR INSTRUCTION MANUAL If the replacement of the fuse fails to correct the above symptoms, SECTION 6 do not attempt further fuse replacement. It is likely that a fault has developed. Seek advice from your nearest PAG dealer or direct from WARRANTY PAG Ltd., London, by telephoning +44 (0) 20 8543 3131. 6.1 Notwithstanding any provision of any agreement the following 5.4 Quasar chargers feature a fail-safe shutdown mode. In the unlikely Warranty i
