Summary of the content on the page No. 1
FPC 8084
All- in-One
8.4” Super Slim
PANEL PC
User’s Manual
Summary of the content on the page No. 2
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Acnodes Co., Ltd. assumes no responsibility for any infringements of patents or other rights of third parties, which may result from its use. Acnodes assumes no responsibility for any inaccuracies that may be contained in this document. Acnodes makes no commitment to update or to keep current the information contained in this manual. Acnodes reser ves the right to make improvements to this docu
Summary of the content on the page No. 3
Safety App rovals CE Marking FCC Class A FCC Compliance This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If not installed and used in accordance with proper instructions, this equipment might generate or radiate radio frequency energy and cause harmful interference to radio communications. However,
Summary of the content on the page No. 4
Safety Precautions Before getting started, read the following important cautions. 1. The FPC 8084 does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and place all electronic components in any static-shielded devices. Most electronic components are sensitive to static electrical charge.
Summary of the content on the page No. 5
8. Do not open the system s back cover. If opening the cover for maintenance is a must, only a trained technician is allowed to do so. Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: 9 Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to discharge any static electricity on your body. When handling
Summary of the content on the page No. 6
This page does not contain any information. vi
Summary of the content on the page No. 7
Table of Contents C h a p t e r 1 Introduction............................................1 1.1 General Description .................................................1 1.2 Specifications ...........................................................2 1.2.1 Main CPU Board ......................................................2 1.2.2 I/O System ...............................................................2 1.2.3 System Specification ..............................................9 1.3 Dimensions ....
Summary of the content on the page No. 8
3.2.3.3 Do Calibration .......................................................28 3.2.3.4 Initializing the PenMount driver ...........................29 3.2.4.5 Demonstration .......................................................29 3.2.4 Driver Installation- Linux .......................................29 3.2.4.1 Advance Setup .....................................................29 3.2.4.2 Install PenMount driver .........................................30 3.2.4.3 Do Calibration ................
Summary of the content on the page No. 9
FPC 8084 All-in-One PANEL PC User s Manual C h a p t e r 1 Introduction This chapter contains the general information and the detail specifications of the GOT-1840T. Chapter 1 includes the following sections: General Descr iption I/O O utle ts System Specification Utilities Supported Dimensions Package List 1.1 General Description The FPC 8084 is a fan-less and compact-size touch panel computer, and is equipped with a 8.4" TFT LCD display and low power consumption CPU, the VIA Eden 667MH
Summary of the content on the page No. 10
FPC 8084 Users Manual Industrial-grade Product Design The FPC 8084 has an incredible design that can be used in different industrial harsh environments. z A fuse helps prevent over-voltage for power input. z Stainless steel back chassis and Aluminum front bezel meets the IP65/NEMA4 standard. z For connecting other devices, the FPC 8084 also features several interfaces: USB, Ethernet, and RS-232/422/485. 1.2 Specifications 1.2.1 Main CPU Board CPU: VIA EDEN 4 00M Hz, 667MHZ System Chipset: VT
Summary of the content on the page No. 11
FPC 8084 User s Manual Ethernet: - Realtek RTL 8100C PCI Bus 10/100M Base-T - Wake-On-LAN - RJ-45 interface equipped Expansion Slot: - one 16-bit PC/104 connector 1.2.3 System Specification 8.4” TFT LCD Disk drive housing: 1 x internal 2.5” drive 100W DC power supply Heat dispensing design One slot for PC/104 Net weight: 18 K gs Dimension (main body size): 280 x 225 x 61.1mm Operating temperature: -1O° to 45°C ; Relative umidity:50% Relative humidity: 10% to 85% @ 40° C, on-condensing A
Summary of the content on the page No. 12
FPC 8084 Users Manual 1.3 Dimensions The following diagrams show the dimensions and outlines of FPC 8084. 10
Summary of the content on the page No. 13
FPC 8084 User s Manual 1.4 I/O Outlets The following figure shows the I/O locations of the FPC 8084. Most of the I/O connectors are located on the back panel of the FPC 8084. 1 2 3 4 5 6 7 8 9 10 1: USB v1.1 6: Keyboard/Mouse 2: COM4 Port 7: USB v1.1 3: Power Switch 8: COM1 Port 4: VGA Port 9: COM2 Port 5: LAN (RJ45) 10: DC inlet 11
Summary of the content on the page No. 14
FPC 8084 Users Manual 1.5 Package List When you receive the FPC 8084 there are following items in the package. 1. FPC 8084 x 1 2. Panel mount kit x 6 3. Desktop kit x 2 4. Desktop kit screw x 4 5. VESA ARM/Wall-mount kit x 1 6. CD driver x1 12
Summary of the content on the page No. 15
FPC 8084 User s Manual C h a p t e r 2 Hardware Installation The FPC 8084 provides lots of flexible ways for you to select different configuration such as HDD, CF card and more. The chapter will show you how to install the hardware. It includes: 2.1 HDD Installation The FPCC 8084 offers a convenient drive bay module for users to install HDD. The FPC 8084 offers one 2.5” HDD drive for users to install. Please follow the steps: 1. Open the HDD back chassis. Unscrew 4 screws of back and 4 screws
Summary of the content on the page No. 16
FPC 8084 Users Manual 3. Fix the HDD bracket kit to system by 4 screws. 14
Summary of the content on the page No. 17
FPC 8084 User s Manual 2.2 CF card Installation The F PC 808 4 offers a convenient drive bay module for users to install CF card. When installing the CF card, refer to the following instructions and illustration: 1. Open the bottom chassis. 15
Summary of the content on the page No. 18
FPC 8084 Users Manual 2. Install user’s CF card. 2.3 Ad d-on Car d Installation The FPC 8084 provides one PC/104 slot. User could install one or two PC/104 card. If user needs the PC/104 Box to protect add-on card, user can order the ‘GOT-PC104-Kit’. When upgrading the add-on card, refer to the following instructions and illustration: 1. Remove the piece by 2 screws. 16
Summary of the content on the page No. 19
FPC 8084 User s Manual 2. Install PC/104 cards on the slot. 3. Set the bracket to protect. 17
Summary of the content on the page No. 20
FPC 8084 Users Manual 2.4 3 x Serial Ports COM Port Connector: COM1 The connector, COM 1, is a DB-9 connector, and the following table shows the pin assignments of this connector. Pin Signal Name 1 DCD, Data carrier detect 2 RXD, Re cei ve d a ta CO M 1 3 TXD, Transmit data 4 DTR, Data term ina l re ady 5 GND, ground 6 DSR, Data set ready 7 R TS , R equ est to s end 8 C TS, Clear to send 9 R I, R ing in d ica to r 18
