Summary of the content on the page No. 1
MITEL
8662
IP Phone User Guide
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Mitel 8662 IP Phone Quick Reference Guide This guide provides information for frequently used Commonly Used Feature Codes features. For more information about these and other Contact your system administrator for more information features, refer to the user guide. For voice mail about system features. information, refer to the voice mail user guide for your system. Feature Code Feature Buttons ACD Agent – Log In/Out 328 Most of the following feature codes work when your Automatic IC Call
Summary of the content on the page No. 4
Answering Calls Placing Conference Calls Lift the handset, or press (Speaker) to answer 1. While on the first call, press the CNF button to a call while using a headset or to answer a call in place the call on hold. CALL NEXT PARTY TO Handsfree Mode. CNF appears. 2. Place a call to the next conference party. For Placing Emergency Calls external calls, press the OUTGOING button or enter the Outgoing Call access code (8 is the Dial the emergency number (911 U.S. or default code), and then d
Summary of the content on the page No. 5
Notice This guide is released by Mitel Networks Corporation and provides information necessary to use 8662 IP Phone. The guide contents, which reflect current Mitel standards, are subject to revision or change without notice. Some features or applications mentioned may require a future release and are not available in the initial release. Future product features and applications are subject to availability and cost. Some features or applications may require additional hardware, software, or s
Summary of the content on the page No. 6
Important Safety Instructions and Precautions Remember the following safety guidelines when using the phone. Programming Emergency Numbers Make sure to do the following when programming emergency numbers and/or making test calls to emergency numbers: • Remain on the line and briefly explain to the dispatcher the reason for the call. • Perform tests during off-peak hours such as early morning or late evenings. Safety Notices The following notices may appear on the product or in the technical d
Summary of the content on the page No. 7
Power Requirements CAUTION Phone Damage Hazard. If you are using an IP phone, make sure it is connected to the proper power supply before powering on. Contact your system administrator for more information. The IP phone requires any one of the following power supplies: • Inter-Tel Power Supply Unit, part number 806.1114 or 806.1117 (Europe), or Mitel Universal Power Supply Unit, part number 828.1766 TM • Red Hawk Single Port PowerSense , Part Number 901.0407 • An industry-standard IEEE 802
Summary of the content on the page No. 8
Phone Usage This equipment is not for connection to the telephone network or public coin phone service. It is only for use when connected to Mitel systems. WARNING When using your phone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. • Av
Summary of the content on the page No. 9
Notice to Canadian Customers The Class B digital apparatus complies with Canadian ICES-003. Notice to U.S. Customers This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the i
Summary of the content on the page No. 10
Summary of the content on the page No. 11
Contents Contents Getting Started 1 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 About Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Feature Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Handset . . . . . . . . . .
Summary of the content on the page No. 12
Contents Answering and Placing Calls 19 Answering Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Answering Waiting Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Using Automatic Call Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Redirecting Calls . . . . . . . . . .
Summary of the content on the page No. 13
Contents Using Dynamic Extension Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Placing Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Adding a Conference Party . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Transferring a Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 14
Contents Hunt Groups 51 Logging in to ACD Hunt Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Logging out of ACD Hunt Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Stopping the ACD Hunt Group Wrap-up Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Other Hunt Group Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 15
Getting Started Getting Started Welcome The instructions in this guide are for using your 8662 IP Phoneon the Mitel 5000 Communications Platform (CP). The Quick Reference Guide located at the beginning of this user guide is an overview of frequently used features. Your phone should be powered on and ready to use. If the display is blank, or if the display name, extension number, or time or date are incorrect, contact your system administrator for assistance. The phone can operate in either
Summary of the content on the page No. 16
Getting Started About Your Phone Your phone is equipped with a six-line display, a hearing aid-compatible handset, a Message Indicator lamp, an internal speaker and microphone, and three types of buttons. See “Feature Descriptions” on page 3 for more information about the phone features. 2 1 1 3 4 8 5 7 6 1 – Handset 5 – Programmable buttons 2 – Display 6 – Dialpad buttons 3 – Message Indicator lamp 7 – Feature buttons 4 – Menu buttons 8 – Speaker ® Page 2 Mitel 8662 IP Phone User Guide – Issu
Summary of the content on the page No. 17
Getting Started Feature Descriptions The following sections describe default configurations. Your phone may be programmed differently. Contact your system administrator for more information. See “About Your Phone” on page 2 for phone feature locations. Handset The handset provided with this equipment is hearing aid compatible (HAC). If you are using a headset or if you are in Handsfree Mode, you do not need to use the handset. Display The phone has a six-line display. When the phone is idle,
Summary of the content on the page No. 18
Getting Started Message Indicator Lamp The Message Indicator lamp flashes or stays lit to indicate call, message, and feature activity. See “Leaving Messages at Other Extensions” on page 45. By default, the Message Indicator lamp is lit when you receive new messages. NOTE However, this lamp can be programmed for other functions. Contact your system administrator for more information. Message Indicator lamp signals are described in the following table. Message Indicator Lamp Signal Descriptio
Summary of the content on the page No. 19
Getting Started Feature Buttons Feature buttons provide quick access to commonly used features. See the following table for descriptions. Button Action (Special) Activates features while on active calls. Depending on how your system is configured, you may need to press this button before you dial a feature code. (Up) (Down) Provides volume control for the ringer, handset, and speaker. Scrolls through feature options. (Speaker) Activates Handsfree Mode (speakerphone). See “Using Handsfree
Summary of the content on the page No. 20
Getting Started Phone Connectors The phone connectors include: Headset port Handset port • Handset port: Connects to a handset. • Headset port: Connects to a headset. • Personal computer (PC) port: Connects to a computer or another 10/100 Ethernet device. • LAN/Power port: Connects to a power supply. PC port LAN/Power port Phone Signals The phone has several audio and visual signals to indicate feature activity. The following are a few helpful tips: • Any buttons that
