Omnimount 1002290 user manual

Summary of the content on the page No. 1

Remove backing strip Rubber Pads (10), and press onto bottom of Foot Assembly and front edge of Shelf.
Thread Shelf Pegs (2) into holes on front edge of Shelf (1). (Fig. 19)
Place CCH1 on top of TV, with Shelf Pegs overlapping front edge of TV, as
Fig. 19
shown in Fig. 20.

Loosen hex screw and slide Leg In or Out until Shelf sits level, then secure
Leg in position with hex wrench.
Note: Maximum extension is shown in Fig 20.

For additional minor adjustments, thread Foot Assembly In

Summary of the content on the page No. 2

Remove backing strip Rubber Pads (10), and press onto bottom of Foot Assembly and front edge of Shelf. CCH-1 (Fig. 9) ID Description Qty Thread Shelf Pegs (2) into holes on front edge of Shelf (1). (Fig. 9) 1 Shelf 1 Place CCH1 on top of TV, with Shelf Pegs overlapping front edge of TV, as shown in Fig. 10. 2 Shelf Pegs 2 Fig. 9 3 Foot Assembly 2 Loosen hex screw and slide Leg In or Out until Shelf sits level, then 4 Leg Assembly 2 secure Leg in position with hex wrench. 2 5 Ex