Summary of the content on the page No. 1
Installation Instructions / Warranty
Citterio M
34134XX1
Summary of the content on the page No. 2
Axor Citterio M widespread lavatory faucet 34134XX1 34134XX1 Technical Information Recommended water pressure 14.7 - 7.5 psi Max. water pressure 145 psi Recommended hot water temp. 120� - 140� F* Max. hot water temp 165�F* Hole size in mounting surface valves 1 1/4" spout 1 3/8" Max. mounting surface depth 1 3/8" Flow rate . gpm *Please know and follow all applicable local plumbing codes when setting the temperature on the water heater. Installation Considerations • For best results,
Summary of the content on the page No. 3
Installation Install the friction washer and fiber washer on the valve. Push the valve up through the hole in the mounting surface. Install the sealing rings, escutcheon, and nuts. The hot valve is marked with red. Rest the valve / escutcheon assembly on the mounting 3 surface (1). Tighten the screws (). Push the handles into place (3). 1 Push the spout shank up through the mounting surface (1). Install the shaft fastening ring (). The notch on the shaft fastening ring and the notc
Summary of the content on the page No. 4
Check the alignment of the handles. If one is not aligned, pull it off (1), turn it slightly (), and reinstall it (3). 3 1 Install the glide ring and the o-ring. 4
Summary of the content on the page No. 5
Lubricate spout the o-ring. Push the spout into place. Tighten the spout screw with a mm Allen wrench. Tighten the mounting nut screws. Install the drain pull rod. 5
Summary of the content on the page No. 6
Thread the connecting hoses into the spout shank by hand. Connect the hoses to the valves with the compression fittings. Tighten the fittings using two wrenches. Do not allow the hoses to twist. Install the hot and cold supply lines (not included). Install the pop-up drain. off on
Summary of the content on the page No. 7
Install the pop-up drain Remove the plunger assembly. plunger Unscrew the drain outlet flange from the tee. height adjuster Unscrew the tailpiece from the tee. Wrap the threads with plumbers’ thread tape and replace. flange Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. From under the sink, install the black mack gas- ket, white friction ring and retainer nut to the flange. Do not tighten the nut against the bottom sealing gasket of the sink at t
Summary of the content on the page No. 8
Cleaning If the flow of water diminishes over time, unscrew the aerator using the service key. Rinse the aerator with clear water. Reinstall the aerator. Tighten it with the service key. 8
Summary of the content on the page No. 9
Replacement Parts 4 3 13 1 11 5 1 7 1 aerator 8000 handle 3405000 3 color-ring set 87000 4 spout 8 8000 5 nut 8000 8 pull rod 4083000 7 cold cartridge 4008000 8 hot cartridge 400000 fixation set 131000 10 connection hose 4071001 11 handle fixing set 8 3 000 1 flange 8 3000 10 13 aerator service key 8 87000 14 14 compression fittings (pr.) 88513000 XX = color 00 = chrome 8 = brushed nickel
Summary of the content on the page No. 10
Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning. Cleaning Materials for Faucets and Showers Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when cleaning faucet
Summary of the content on the page No. 11
the product for use primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper i
Summary of the content on the page No. 12
Hansgrohe, Inc. • 140 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel. 770-30-880 • Fax 770-30-887 www.hansgrohe-usa.com US - Installation Instructions • Part No. 04411 • Revised 04/008