Summary of the content on the page No. 1
VF01
Summary of the content on the page No. 2
Dear Customer, ® Thank you for purchasing the Verilux Original Deluxe Natural ® Spectrum Floor Lamp. You have received a quality product, ® backed by a three-year limited warranty. As a Verilux customer, your satisfaction means everything to us. We look forward to serving you now and in the future. Many other healthy lighting products are available through our catalog and online. Please visit us on the web at ® www.Verilux.com to learn about other great Verilux products. Have a Bright Day!
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS ® Thank you for purchasing the Original Natural Spectrum Deluxe Floor Lamp. Please read the following safety information before using. To reduce the risk of fi re, electrical shock, or injury to persons: • Do NOT dismantle. • Do NOT alter power cord. • Turn off/unplug and allow to cool before replacing bulb or cleaning. • For indoor use only. • The lamp is an electrical device. DO NOT USE NEAR WATER GENERAL PRECAUTIONS • Before plugging in
Summary of the content on the page No. 4
GETTING STARTED Main Parts & Controls F. Polarized Plug A. Lamp Head G. Parabolic Grid Diffuser B. Gooseneck H. Bulb C. Shaft I. High/Off/Low Switch D. Lamp Base E. Power Cord Close-up of Lamp Head A B H I G C E D F Attention! DO lift your lamp by the shaft. DO NOT lift the lamp by the gooseneck. 4
Summary of the content on the page No. 5
UNPACKING YOUR LAMP 1. Remove all pieces from box. Locate 2 screws and tightening tool. 2. Detach red plastic pieces and store them in the event you need to return the lamp. 3. Important: To avoid scratching the metal shaft, do not use a sharp object to cut the plastic covering. The clear plastic covering on the shaft is specially designed to tear away easily. IMPORTANT NOTE: Remove red plastic protective pieces prior to assembly. 5
Summary of the content on the page No. 6
ASSEMBLY INSTRUCTIONS Read Instructions Carefully Before Assembly: 1. Remove lamp from box and packaging. Remove red plastic protective pieces from lamp shaft. NOTE: Please save original packaging for repacking should you need to return the product. 2. Set lamp base on the fl oor and insert the lamp shaft over the base support part until the screw holes line up as shown in Fig.1. Insert the screw using the tightening tool and turn clockwise to tighten. We recommend assembling the base
Summary of the content on the page No. 7
ASSEMBLY INSTRUCTIONS cont. 4. Attaching the Parabolic Grid Diffuser • Remo ve grid diffuser from protective plastic bag • Inser t plastic pegs at bottom of grid diffuser into openings near bulb socket • Snap tab into place 5. Plug lamp into outlet and turn on; if bulb does not illuminate instantly, please refer to the troubleshooting section of this manual. 7
Summary of the content on the page No. 8
BULB REPLACEMENT INSTRUCTIONS Removal 1. Unplug lamp from power source. C 2. To access to the bulb, remove grid diffuser by depressing the tab and lifting it out. (See page 7) 3. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in B an outward motion. A Installation 1. Unplug lamp from power source. C 2. Firmly hold base (B) and push bulb (C) into the socket (A). 3. Be sure bulb is fi rmly seated in the socket (see below) and snapped into the metal bulb clip (D). B A 4. Rep
Summary of the content on the page No. 9
TROUBLESHOOTING ® Before Requesting Service on Your Verilux Lamp, Please Read the Following: • Make sure all power connectors, cords, and plugs are inserted fully and securely. • Be sure the bulb is securely seated into the socket. (See page 8) • Make sure there is power to the wall outlet or try another outlet. 9
Summary of the content on the page No. 10
CARE & CLEANING Your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp, using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit, and allowed suffi cient time for the unit to cool. All liquid should be properly wiped away and dried prior to restoring power. DO NOT USE SOLVENTS OR CLEANERS CONTAINING ABRASIVES, OR AMMONIA BASED CLEANERS Note: All mo
Summary of the content on the page No. 11
WARRANTY Three-Year Limited Warranty ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT! Many questions may be answered by visiting www.Verilux.com, or you may call our customer service department at 1-888-544-4865. This limited warranty is provided by: Verilux, Inc., 340 Mad River Park, Waitsfi eld, VT 05673 ® Verilux warrants this product to be free from defects in material and workmanship for a period of three years from t
Summary of the content on the page No. 12
Please visit our web site at: www.Verilux.com 340 Mad River Park, Waitsfi eld, VT 05673 1-888-544-4865 Printed in Taiwan for Verilux, Inc. VF01-MAN-Rev2 © Copyright 2007 Verilux, Inc. All rights reserved.
