Atec BC-9400A user manual

Summary of the content on the page No. 1

MODEL BC-9400A
OPERATOR'S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for battery charger you have
1.
purchased. You may need to refer to these instructions at a later date.
CAUTION. To reduce risk of injury, charge only wet cell, lead-acid, automotive type rechargeable batteries. Other types of batteries may
2.
burst causing personal injury and property damage.
Do not expose the charger to rain or snow if spe

Summary of the content on the page No. 2

CHARGER LOCATION 15. a. Locate the charger as far away from the battery as the DC cables permit. b. Never place the charger directly above the battery being charged; gases from the battery will corrode and damage the charger. c. Never allow battery acid to drop on the charger when reading the specific gravity or filling battery, d. Do not operate the charger in a closed-in area, or restrict ventilation in any way. e. Do not set a battery on top of the charger. DC CONNECTION PRECAUTIONS 16. a. Co

Summary of the content on the page No. 3

GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS 20. The charger should be grounded to reduce the risk of electric shock. This charger is equipped with an electric cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER. Never alter the AC cord or plug provided - if it will not fit the outlet, have a proper outlet installed by a qualified elec

Summary of the content on the page No. 4

OPERATING INSTRUCTIONS CAUTION - This battery charger must be fully assembled before operating. Failure to do so may result in risk of injury. USE OF INSTRUMENT PANEL: The MINUTES CHARGE timer has an OFF position, a CONTINUOUS CHARGE position and a timed charge range from 0 to 90 minutes. a. OFF - Always make sure the timer is in the OFF position before connecting or disconnecting the clamps from the battery. The charger will not charge with the timer in this position. b. 0 to 90 MINUTES TIMED

Summary of the content on the page No. 5

WIRING DIAGRAM MODEL BC-9400A PARTS LIST Timer Rectifier Amps Charge Meter 610389 610392 610278 610277 Switch 610391 Transformer 610282 AC Cord 605671 Leg 610189 Fan Blade 605677 DC Cable Set 610052 Axle w/nuts 610190 Fan Motor 610283 Handle 605672 Wheels w/nuts 610281 DC Circuit Breaker Parts may be purchased from your local authorized service depot listed in the Service Procedure manual supplied with your product. If you elect to order parts from the factory you may do so by mail or phone. M

Summary of the content on the page No. 6

W???? Rev. ??/?? 027-0518 6

Summary of the content on the page No. 7

8400A ENGLISH MANUAL ILLUSTRATION LISTING 27-523E.MAN FILE NAME DESCRIPTION FIG. LOGO.EPS ASSOCIATED LOGO 1 STOP-GO.WPG STOP GO LITE ON BATTERY-ENGLISH 2 EXT-BAT.WPG EXTERNAL BATTERY W/LEAD EXTENSION 3 PLUG-ENG.PLT GROUNDING ADAPTER -ENGLISH 4 ENGLSTBL.PLT CHARGE RATE TABLE - ENGLISH 5 8400CAB.TIF 8400A CABINET 6 8400WR-e.PLT 8400A WIRING DIAGRAM - ENGLISH 7 7