Sunrise Medical Guardian Easytrack System Wall Mount Assembly 900-1086 user manual

Summary of the content on the page No. 1

®
Guardian Easytrack System
Installation
Wall Mount Assembly
&
Model 900-1086
Instruction
Manual

Summary of the content on the page No. 2

2 Introduction TABLE OF CONTENTS Introduction .......................................................................................... 2 Important Safeguards.............................................................................. 3 Requirements ......................................................................................... 4 Before You Begin .................................................................................... 4 Kit Contents & Part Numbers .......................

Summary of the content on the page No. 3

Important Safeguards 3 IMPORTANT SAFEGUARDS Do not operate this equipment without first reading and understanding this manual. Should you be unable to understand the warnings, cautions and instructions, contact our technical support or your local dealer before attempting to use this equipment– otherwise injury or damage may result. Important information is highlighted by these terms: WARNING– Notices as used in the manual apply to hazards or unsafe practices which could result in serious bodily

Summary of the content on the page No. 4

4 Assembly Instructions ASSEMBLY INSTRUCTIONS 1 36-40" REQUIREMENTS (915-1020mm) 16-18" (400-460mm) Failure to meet requirements listed below could result in serious bodily harm. • Wall mount should be installed by a skilled tradesperson. Installation of the wall mount by someone unskilled will void Sunrise warranty and may cause serious injury or damage. • Every month a maintenance check should be done to ensure the rail is level (see 2 “Maintenance” in this manual). • Protect the Easytrack Sys

Summary of the content on the page No. 5

Assembly Instructions 5 EASYTRACK WALL MOUNT KIT 8 1 CONTENTS & PART NUMBERS (Figure 8) 2 Description Part # Qty 1 Wall mount plate 900-1085 1 3 2 Pivoting rail attachment 900-1087 1 Includes: 4 3 Round blue cap 900-1072 1 4 Pivot wall mount N/A 1 5 Fixation wall mount N/A 1 6 6 Back plate N/A 1 7 7 M 10 X025 screw 900-0409 1 5 ASSEMBLY OF WALL MOUNT ASSEMBLY standard rail 9a Tools required: • Step ladder 1 1/8" • Tape measure (28mm) • 6 concrete 3/8” anchors or 6 3/8” lag bolts • Drill • Wren

Summary of the content on the page No. 6

6 Maintenance MAINTENANCE Failure to follow maintenance instructions below when indicated could result in injury or damage. Periodic inspection should be performed by a person who is suitably and properly qualified and well acquainted with the design, use and care of the Easytrack System. Contact your local dealer/distributor. Inspection should be carried out both routinely (at least as often as specified) and, as nec- essary. If any damage to the system is detected through routine inspections,

Summary of the content on the page No. 7

Warranty 7 WARRANTY This warranty is extended only to the original purchaser/user of Sunrise products. Sunrise Medical Inc. warrants its products to be free from defects in material under normal use and service and will, within the periods stated below, from the date of purchase. If within such warranty period any such product shall be proven to be defective, such product shall be repaired or replaced at Sunrise Medical's option. This warranty does not include any labor or shipping charges inc

Summary of the content on the page No. 8

Manufactured for: Sunrise Medical 7477 East Dry Creek Parkway Longmont, Colorado 80503 (800) 333-4000 In Canada (800) 263-3390 Printed in Canada © 2002 Sunrise Medical 5.02 900-0690 Rev. A