Source Technologies ETC 419 user manual

User manual for the device Source Technologies ETC 419

Device: Source Technologies ETC 419
Category: Indoor Furnishings
Manufacturer: Source Technologies
Size: 0.97 MB
Added : 6/23/2013
Number of pages: 16
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Source Technologies ETC 419. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Source Technologies ETC 419.

For your convenience

If looking through the Source Technologies ETC 419 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Source Technologies ETC 419 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Source Technologies ETC 419 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Source Technologies ETC 419 User manual - Online PDF
Advertisement
« Page 1 of 16 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Source Technologies ETC 419 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Source Technologies ETC 419. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

CE User Manual
Production Dates: September 2004 - Present
Copyright © 2007 Electronic Theatre Controls, Inc.
All Rights reserved.
Product information and specifications subject to change.
Part Number: 7060M1210-06.01 Rev A
Released: August 2007

Summary of the content on the page No. 2

Table of Contents Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Source Four CE guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Basic luminaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Luminaire information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Colour frame holder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Replacing the HP

Summary of the content on the page No. 3

English Declaration of conformity We, Electronic Theatre Controls, Europe Ltd. declare under sole responsibility that the product: Product name: Source Four CE Product type/model: Source Four CE series (405, 410, 414, 419, 426, 436, 450, 470, 490) Lot: n/a Batch/Serial number: n/a Item numbers: one of each model to which this declaration relates in conformity with the following standards: EN60598-1:2000 Luminaires, General requirements and tests EN60598-2-17:1990 Specification for luminaires fo

Summary of the content on the page No. 4

English Source Four CE guidelines The Source Four CE is intended for professional use only. Read the entire User Guide before using equipment. Please note the following safety precautions. WARNING: • Do not mount the Source Four CE on or near a flammable surface. • Use the Source Four CE in dry locations only, where humidity does not exceed 90 percent. • The luminaire is for indoor use only and is not intended for outdoor use. • For temporary installations, mount and support the Source Four C

Summary of the content on the page No. 5

English Basic luminaire Earth continuity cable Secondary suspension point Primary suspension yoke mounting holes Lamp socket assembly Retainer bolt Drop-in iris slot Retainer bolt Colour frame Lens tube Reflector housing Yoke locking knob Reflector Gel retainer clip Barrel rotation knob Shutters Barrel Gobo holder slot assembly Beam focus knob Safety screen Colour frame holder (19°, 26°, 36° and 50° only) Figure 1 Please note the following safety warnings before use: WARNING: Do not mount the

Summary of the content on the page No. 6

English Luminaire information Wiring and power information A plug of at least 2.5 amp (220/240V) rating should be attached to the luminaire’s mains lead. The 2 wires in the mains lead are 1.55mm each and coloured in accordance with the following code: Green and Yellow: Earth t 180°c Blue: Neutral Brown: Live This luminaire must be earthed. WARNING: Current rating: 120V/5 amp maximum 240V/2.5 amp maximum Operating frequency: 50/60 Hz HPL lamp table Do not use lamps other than the HPL in Source F

Summary of the content on the page No. 7

English Colour frame holder Retaining clip in the locked position Figure 2 The colour frame holder is equipped with a spring-loaded retaining clip that prevents colour frames and accessories from falling out. See Figure 2. Make sure all colour frame accessories are locked in position with the WARNING: retaining clip before hanging the Source Four luminaire. Step 1: Release the retaining clip by pushing it sideways while gently pulling backwards. Step 2: Insert the colour frame. Step 3: Lock t

Summary of the content on the page No. 8

English Replacing the HPL lamp HPL lamp Lamp retention Lamp retaining clips brackets Lamp housing Knurled bolt Figure 3 A lamp must be installed before you use the luminaire. Verify that the HPL lamp you intend to install is suitable for your facility’s voltage; Note: 115-, 120-, 230-, and 240-volt HPL lamps are available. See HPL lamp table, page 4. Operating HPL lamps above their rated voltage reduces lamp life and can cause premature lamp failure. Let the lamp cool before replacing. WARNIN

Summary of the content on the page No. 9

English Centering lamp and adjusting the field Flat field-best adjustment Rear lamp Inner Knob - housing peak/flat field adjustment Hot spot - lamp pulled out too far Field with hole - lamp pushed in too far Outer Knob - lamp center adjustment Figure 5 Figure 4 The two concentric knobs located on the lamp housing allow you to align the lamp and adjust its field. See Figure 4. The outer knob centers the lamp within the reflector. The inner knob adjusts the lamp’s field. Step 1: Turn on th

Summary of the content on the page No. 10

English Shaping the beam The beam can be shaped using the shutters (see Figure 8), a gobo, an optional drop-in iris, or by rotating the barrel. Gobo Projection The gobo holder slot is on the top side of the barrel and in front of the shutters. It accommodates A-size, B-size and glass gobo holders (see Figure 7). A-Size Gobo holder: holds 7.62 cm diameter gobos B-Size Gobo holder: holds 6.35 cm and 6.98 cm diameter gobos 7.92 cm Diameter 6.98 cm Diameter 9.4 cm Figure 7 9.4 cm Because the S

Summary of the content on the page No. 11

English Step 3: Insert the iris or motorized gobo device. For an iris, install the flat side toward the shutters and make sure the iris handle extends from the slot. Step 4: Slide the slot cover back toward the shutters until it meets the iris handle. Leave enough space to move the iris handle. Step 5: Secure the drop-in iris slot cover by tightening the screws. Rotating the barrel assembly Barrel rotation knob Figure 9 Step 1: Loosen the barrel rotation knob directly behind the shutters on th

Summary of the content on the page No. 12

English Setting the angle within the yoke Yoke locking knob Figure 11 Step 1: Loosen the yoke locking knobs (see Figure 11). Do not remove them. Step 2: Tilt the luminaire to the desired position. Step 3: Tighten the yoke locking knobs to secure in position. Cleaning lens and reflector Do not use ammonia-based or other harsh commercial cleaners. Clean WARNING: lenses and reflector only as directed. Commercially available glass cleaning agents should be avoided as they may contain ammonia, othe

Summary of the content on the page No. 13

English Step 1: Remove the beam focus knob at the bottom of the barrel (see Figure 1). Remove the lens tube from the barrel. Step 2: Use a Phillips screwdriver to remove the brackets that hold the lens in place. Remove the lens from the tube. Step 3: Dip the lens in a clean isopropyl alcohol/water mixture (9 parts water to 1 part isopropyl alcohol). Step 4: Use a soft moistened nylon bristle brush to wash the lens’ smooth side in a linear (non- circular) motion. Step 5: Use the same brush to

Summary of the content on the page No. 14

English Portable appliance test (PAT) guidelines The Portable Appliance Test is a set of tests that must be administered to electrical equipment in the UK and some locations in Europe to ensure safety.The tests are typically carried out using a small PAT device. The PAT device connects to a power source and then attaches to the product via an electrical outlet and test probes. The PAT provides a simple pass or fail result, allowing rapid testing of large inventories. Source Four CE luminaire

Summary of the content on the page No. 15

English 13

Summary of the content on the page No. 16

Corporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fax +608 836 1736 London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0)20 8896 1000 Fax +44 (0)20 8896 2000 Rome, IT Via Ennio Quirino Visconti, 11, 00193 Rome, Italy Tel +39 (06) 32 111 683 Fax +39 (06) 32 656 990 Holzkirchen, DE Ohmstrasse 3, 83607 Holzkirchen, Germany Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00 Hong


Alternative user manuals
# User manual Category Download
1 Source Technologies ETC 410 User manual Indoor Furnishings 0
2 Source Technologies ETC 405 User manual Indoor Furnishings 0
3 Source Technologies ETC 426 User manual Indoor Furnishings 0
4 Source Technologies ETC 450 User manual Indoor Furnishings 0
5 Source Technologies ETC 470 User manual Indoor Furnishings 0
6 Source Technologies ETC 414 User manual Indoor Furnishings 0
7 Source Technologies ETC 436 User manual Indoor Furnishings 0
8 Source Technologies ETC CE series User manual Indoor Furnishings 0
9 Source Technologies ETC 490 User manual Indoor Furnishings 0
10 Sony User manual Indoor Furnishings 1
11 Sony XL-2000K User manual Indoor Furnishings 1
12 Sony SU-32FS2 User manual Indoor Furnishings 3
13 Sony PSS-610 User manual Indoor Furnishings 10
14 Sony HVL-LBP User manual Indoor Furnishings 8
15 Sony SU-GW1 User manual Indoor Furnishings 2