Sanus Systems VMPL50 user manual

Summary of the content on the page No. 1

Step 3: Mounting the Wall Plate: Wood Stud, Brick, Solid Concrete, and Concrete Block mounting options are provided.
Wood Stud mounting:
The Wall Plate (a) must be mounted to two wood studs at least 12" apart. Use a high quality stud sensor to locate two adjacent
studs. It is a good idea to verify where the studs are located with an awl or thin nail shown in Diagram 3a. Pre-drill a 2.5" deep hole at
the desired height in each stud using a 3/16" drill bit. Make sure these holes are in the cen

Summary of the content on the page No. 2

Step 1: Mount Monitor Brackets to a television with a flat back Step 2: Mount Monitor Brackets to a television with a curved back or an obstruction near the threaded insert First, determine the diameter of the Bolt (d,e,f,g) your TV requires by hand threading them into the threaded insert on the back of the First, determine the diameter of the Bolt (h,i,j,k) your TV requires by hand threading them into the threaded insert on the back of the TV. TV. If you encounter any resistance stop immediate