Summary of the content on the page No. 1
Ed. 00
OfficeServ 7100
Installation Manual
Summary of the content on the page No. 2
COPYRIGHT This manual is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplicated for any commercial purposes or disclosed to the third party in any form without the prior written consent of SAMSUNG Electronics Co., Ltd. TRADEMARKS is the trademark of SAMSUNG Electronics Co., Ltd. Product names mentioned in this manual may be trademarks and/or registered trademarks of their r
Summary of the content on the page No. 3
Summary of the content on the page No. 4
Summary of the content on the page No. 5
OfficeServ 7100 Installation Manual INTRODUCTION Purpose OfficeServ 7100 is the most suitable system for offices using circuit lines with 10 to 25 subscribers. This manual describes the condition for OfficeServ 7100 system installation and how to install, inspect and operate the system. Document Content and Organization This document consists of eight chapters, and abbreviations as follows: CHAPTER 1. Before Installing This chapter describes the checklists, such as the
Summary of the content on the page No. 6
Ош и бка! Стиль не определе н. CHAPTER 7. Connecting Stations and Additional Equipment This chapter describes how to connect various stations and additional equipment, such as analog/digital phones, door phones and door locks, to the OfficeServ 7100 system. CHAPTER 8. Starting the System This chapter describes items to check before starting the OfficeServ 7100 system, the procedure for starting the system, and the procedure for testing whether the system is normally operating after sta
Summary of the content on the page No. 7
OfficeServ 7100 Installation Manual Reference OfficeServ 7100 System Manual This document introduces OfficeServ 7100 and describes the system information, such as hard configuration, specification, and functions, necessary for this system. OfficeServ 7100 Programming Manual This document describes how to use the MMC program to change the OfficeServ 7100 system setting by using a phone. Revision History EDITION DATE OF ISSUE REMARKS 00 08. 2006. Original Draft 01 01.2007. Safety
Summary of the content on the page No. 8
Ош и бка! Стиль не определе н. This page is intentionally left blank. IV © SAMSUNG Electronics Co., Ltd.
Summary of the content on the page No. 9
OfficeServ 7100 Installation Manual SAFETY CONCERNS For product safety and correct operation, the following information must be given to the operator/user and shall be read before the installation and operation. Symbols Caution Indication of a general caution Restriction Indication for prohibiting an action for a product Instruction Indication for commanding a specifically required action © SAMSUNG Electronics Co., Ltd. V
Summary of the content on the page No. 10
Ош и бка! Стиль не определе н. Warning WARNING Caution for Grounding - Do not connect the grounding wire of the OfficeServ 7100 system to a power conduit of a building - The standards for power and grounding should comply with the country standard and the pertinent work should be conducted according to the country standard. - External grounding is required to prevent human injuries or system damages caused by lightning, static electricity, or voltage surge. - Unplug the AC po
Summary of the content on the page No. 11
OfficeServ 7100 Installation Manual Caution CAUTION Caution for Installation Only a trained service staff can install the OfficeServ 7100 system. The equipment intended only for installation in a RESTRICTED ACCESS LOCATION Caution for the connection of External Batteries Do not connect an external AC power until the battery and the system is completely disconnected. To do so may cause electric shock to the constructor or the system. Make sure that the specified polari
Summary of the content on the page No. 12
Ош и бка! Стиль не определе н. Separation of TNV and SELV - Pluggable A The separate protective earthing terminal provided on this product shall be permanently connected to earth. (Instruction) Telephone line cord To reduce the risk of fire, use only No. 26 AWG or larger (e.g., 24 AWG) UL Listed or CSA Certified Telecommunication Line Cord. Safety Instructions for Rack Mount The following or similar rack-mount instructions are included with the installation instruc
Summary of the content on the page No. 13
OfficeServ 7100 Installation Manual Un-allowed Use of Selector Switch The OfficeServ 7100 system only use 230 V. Do not change the input power freely by means of the selector switch. AC Power Connection Inhibited Do not operate other devices with the AC power of the OfficeServ 7100 system or with the DC power of external batteries. Check of Power-off Check if the cabinet power is off when mounting boards on slots. Inserting or ejecting a board while the power is on may d
Summary of the content on the page No. 14
Ош и бка! Стиль не определе н. This page is intentionally left blank. X © SAMSUNG Electronics Co., Ltd.
Summary of the content on the page No. 15
OfficeServ 7100 Installation Manual TABLE OF CONTENTS INTRODUCTION I Purpose ................................................................................................................................................. I Document Content and Organization..................................................................................................... I Conventions......................................................................................................................
Summary of the content on the page No. 16
Ош и бка! Стиль не определе н. 2.5 Connecting the Grounding Wire ...........................................................................................2-4 CHAPTER 3. Mounting and Replacing Boards 3-4 3.1 Cabinet Configuration ...........................................................................................................3-4 3.2 Mounting Control Boards......................................................................................................3-4 3.2.1 Setting Switch
Summary of the content on the page No. 17
OfficeServ 7100 Installation Manual 7.2 Connecting Additional Equipment....................................................................................... 7-4 7.2.1 Connecting MOH/BGM Equipment ......................................................................................7-4 7.2.2 Connecting External/Additional Page Equipment.................................................................7-4 7.2.3 Connecting Common Bell...........................................................
Summary of the content on the page No. 18
Ош и бка! Стиль не определе н. LIST OF FIGURES Figure 2.1 Tools for the Installation inside a Rack...................................................................2-4 Figure 2.2 Rack Installation (1) ...............................................................................................2-4 Figure 2.3 Rack Installation (2) ...............................................................................................2-4 Figure 2.4 Rack Installation (3) .......................
Summary of the content on the page No. 19
OfficeServ 7100 Installation Manual Figure 6.3 RJ-45 Port of TEPRI Board ................................................................................... 6-4 Figure 7.1 RJ-45 Port of 4SLM Board .................................................................................... 7-4 Figure 7.2 RJ-45 Port of 16SLI2 Board .................................................................................. 7-4 Figure 7.3 RJ-45 Port of 8COMBO Board (for Analog Phone Connection) ..........
Summary of the content on the page No. 20
Ош и бка! Стиль не определе н. This page is intentionally left blank. XVI © SAMSUNG Electronics Co., Ltd.
