KitchenAid undermount Sinks user manual

Summary of the content on the page No. 1

™
Undermount Sinks
For installation with solid surfaces
Installation Instructions and
Use & Care Guide
Quick Reference
Table of Contents:
Pages
2 Tools and Parts
2 Installation Requirements
3- 4 Installation Instructions
5 Use & Care Guide
5 Warranty
6 Requesting Assistance or Service
Part No. 8534965

Summary of the content on the page No. 2

Check local codes. All plumbing connections should be made by a licensed, qualified plumber. Installation requirements... Installation must be performed by a qualified fabricator/ installer. The sink installation must comply with national and The KitchenAid™ Undermount System is based on installing local plumbing codes and ordinances. Undermount Series sinks, including the plywood If more holes are required in the sink deck, the holes must be reinforcement sheet (sink support), with the countert

Summary of the content on the page No. 3

Installation Instructions... • As with all metal objects, follow proper handling techniques. • Freight handling and job site exposure may have damaged 1. Fasten the masonite template (provided) to the 1/2” the sink. This sink should be examined for damage prior to plywood sheet with 1/2” Phillips flathead screws. The enclosure/installation. Do not install a damaged sink. Return screws must be flush with or below the top of the the sink to the dealer from whom you purchased it. Failure masonite t

Summary of the content on the page No. 4

Create sink support Install undermount sink 1. Prepare minimum 1/2” plywood sheet (sink support) by 1. Clean flange and rim of sink, and countertop mating cutting to dimensions of cabinet it will be mounted to. surface (underside of countertop) with solvent such as denatured alcohol. 2. Secure 1/2” plywood sheet (sink support) to work surface using various clamps. Fasten the female 2. Set sink in sink support cutout. template (plywood) to the 1/2” plywood sheet (sink support). Using the 1-3/16”

Summary of the content on the page No. 5

Use & Care Guide Do routine cleaning To maintain luster Use soap, warm water and sponge. Rinse thoroughly Use a small amount of mineral oil on a soft cloth. Apply and wipe dry. evenly to the entire surface of the sink and buff to a shiny finish. To remove stubborn stains Use any cleaner acceptable for use on stainless steel. Do not use steel wool, scouring pads, steel brushes, Always rub in the direction of the grain. Rinse etc. Their particles may become embedded in the sink thoroughly and wipe

Summary of the content on the page No. 6

Requesting Assistance or Service If you need assistance or service in U.S.A. Our consultants provide assistance with: Call the KitchenAid Customer Interaction Features and specifications on our full line of sinks Center toll-free at 1-800-422-1230. • Our consultants are available to assist you. Installation information • Use and maintenance procedures When calling: Please know the purchase date, and • Accessory and repair parts sales the complete model of your sink. This • information will help