Human Touch PCX720 user manual

Summary of the content on the page No. 1

PCX720
troubleshooting guide Zero-Gravity Recliner

Summary of the content on the page No. 2

September 13, 2013 ©2013 Human Touch, LLC. All rights reserved.

Summary of the content on the page No. 3

PCX-720 Troubleshooting This Troubleshooting Guide walks you step-by-step through the diagnosis of PCX-720 customer problems. It is important to follow these steps carefully, to ensure that the problem is diagnosed correctly, and therefore the appropriate repair action is taken. Getting Started 1. Reset the chair by unplugging it, then plugging it back in. 2. Push the PRO button and observe whether the blue LED lights. If it does not, the chair is not receiving power. See "Power" on page 3

Summary of the content on the page No. 4

To Troubleshoot This Do the following: Issue If the footrest will not raise/lower at all, replace the footrest actuator. If that does not solve the problem, do one of the following: � For serial numbers CWC24130001 - My footrest will not CWC24130078, replace both the control raise/lower. panel and the main control module w/power cord. � For all other serial numbers, replace the control panel. Replace the footrest scissor assembly. My footrest is physically bent/broken. Verify that you

Summary of the content on the page No. 5

Power Step 1: Check the power cord. 1. Check the entire length of the power cord for damage; if the power cord is damaged, replace the control module. Step 2: Check the wall outlet. 1. Plug a different device, such as a known working lamp, into the AC outlet into which the chair is plugged. 2. If the device does not work (is not receiving power), the AC outlet is most likely not working. Plug the chair into a different AC outlet to verify that it receives power. Step 3: If the chair is stil

Summary of the content on the page No. 6

Human Touch, LLC 3030 Walnut Ave. Long Beach, CA 90807 www.humantouch.com