Human Touch HT-5005 user manual

Summary of the content on the page No. 1

Oct-17-08

X1103
REPLACING THE REMOTE CONTROL
H T - 5 0 0 5
®
To ensure that Human Touch products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all
SERVICE LEVEL: 2
product repairs are performed using only factory-new parts and in accordance with these product repair instructions.
Tools Required: Phillips-head screwdriver. NOTE: SAVE ALL SCREWS FOR USE DURING REASSEMBLY.
REMOVING THE REMOTE CONTROL
Rem

Summary of the content on the page No. 2

INSTALLING THE NEW REMOTE CONTROL NOTE: If the remote control cable harness falls into the backrest, you will need to remove the backrest cover to retrieve it. To do this, open the nylon backrest cover zippers, then push the cover up over the headrest. Using a Phillips-head screwdriver, remove the four screws that secure the backrest cover. Remove the cover enough to feed the remote control cable harness through the backrest cover, then connect it to the new remote control connector. 1. Reco