Chauvet ZX-20LQ user manual

Summary of the content on the page No. 1

Precision Series
ZX-20LQ
User Guide
Please read these instructions carefully before use
World-wide Headquarters:
3000 North 29th Ct.
Hollywood, Florida, USA 33020
Tel: +1-954-929-1115 Fax: +1-954-929-5560
www.ChauvetLighting.com

Summary of the content on the page No. 2

On Front: •Effect Mirror • Lens On Bottom: •Funtion Switch •Fuse Holder •Fan On Back: Rear View • Bracket Screws • Cable to Head Front View •Gobo Holder •Lamp Replacement Cover Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will enjoy many trouble free hours with this unit. To assist with the care and use of the product we have prepared this short guide. Operation Before connecting this unit to the mains power supply for the first time you must first

Summary of the content on the page No. 3

Features Removeable Head -To use the ZX-20LQ as a projector, the head may be removed. In order to remove the head, simply unscrew the four screws holding the head bracket to the body of the unit and unplug the connecting cable. Function - The ZX-20LQ offers the user a choice of either static, continuous rotation or beat activation. This feature is controlled by the 3 position switch on the bottom of the unit (located just above the fan). This controls only the effects mirror. Effect - The ZX

Summary of the content on the page No. 4

Replacing Fuses If the unit does not function at all when connected to the main power supply i.e. the mechanism does not spin. Then it is highly likely that the fuse has blown. Disconnect from main power supply before attempting to replace either lamps or fuse. In order to replace the fuse, disconnect from the main power supply first, and then unscrew the fuse- holder cover to reveal the fuse. The unit has a label attached which indicates the correct fuse rating and you will also find this lis

Summary of the content on the page No. 5

Power Connections The unit is supplied with a power plug appropriate to its voltage and destination. Should any other connections be required they must be carried out with the following configuration. Earth = Green/Yellow cable Neutral = Blue cable Live = Brown cable In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection. In the UK, it is required that all mains plugs are fitted with 5A fuses. Technical Specifications Power: 110V, 60 Hz or 230V, 50