American Standard Pekoe Pull-Down M962689-0070A user manual

Summary of the content on the page No. 1

Installation
Instructions
4332.300.XXX
PEKOE PULL DOWN
SINGLE CONTROL KITCHEN
FAUCET with PULL DOWN SPRAY
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Certified to comply with ANSI A112.18.1M
M968581 Rev.1.1
Recommended Tools
Phillips Screwdriver
Channel Locks
Adjustable Wrench
Plumbers' Putty or Caulking Tubing Cutter
INSTALL FITTING
1

Summary of the content on the page No. 2

MAKE WATER SUPPLY CONNECTIONS 2 Turn off hot and cold water supplies before beginning. BLUE Connect FLEXIBLE SUPPLIES (1, 2) directly to wall supplies. Connection RED STRIPE on fitting supplies are 3/8" compression. Connect left supply STRIPE (Marked with a Red Stripe) to Hot and right supply (Marked with Blue Stripe) to Cold wall supply. Use adjustable wrench to tighten connections. Do not over tighten. Faucet supplies are 27-1/2" long from faucet base. 2 Note: If additional supply length is re

Summary of the content on the page No. 3

TEST INSTALLED FAUCET 4 3 Move HANDLE (1) into "off" position. Unthread SPRAY HOSE (3) from SPRAY (2). 1 2 Turn on water supplies and check connections for leaks. 5 Hold HOSE END (3) in sink and operate HANDLE (1) on and off, hot and cold to flush water lines thoroughly. Replace SPRAY (2). Pull SPRAY (2) out and check hose and supply connections for leaks. Check that SPRAY HOSE (3) and WEIGHT (4) slide up and down freely and do not interfear with supplies or waste outlet plumbing. With fauc

Summary of the content on the page No. 4

PEKOE PULL DOWN SINGLE CONTROL KITCHEN FAUCET WITH PULL DOWN SPRAY MODEL NUMBER 4332.300.XXX M962643-YYY0A SPRAY HOSE AND SEALS M962687-YYY0A SPOUT ASSEMBLY M962683-YYY0A PULL-OUT SPRAY WITH CHECK VALVE M962684-YYY0A AERATOR SET M962652-0070A M962648-0070A SPOUT SET SCREW SPOUT BUSHING M962690-0070A & O-RING KIT CARTRIDGE NUT M9629691-YYY0A CARTRIDGE COVER M962685-YYY0A PEDESTAL M962686-0070A O-RING M962688-YYY0A HANDLE KIT M962689-0070A CARTRIDGE Replace the "YYY" with appropriate finish code