Summary of the content on the page No. 1
900W
1/2” IMPACT WRENCH
IW1000
INSTRUCTION MANUAL
Summary of the content on the page No. 2
Contents Warranty Warranty Power Tools Whilst every effort is made to ensure your complete Introduction 3 satisfaction with this tool, occasionally, due to the mass Environmental protection 3 manufacturing techniques, a tool may not live up to our required level of performance and you may need the Description of symbols 3 assistance of our service department. Specifications 3 This product is warranted for a 2-year period for home General safety instructions 4 domestic use from
Summary of the content on the page No. 3
Introduction Description of symbols Your new GMC power tool will more than satisfy The rating plate on your tool may show symbols. your expectations. It has been manufactured under These represent important information about the stringent GMC Quality Standards to meet superior product or instructions on its use. performance criteria. Wear hearing protection. You will find your new tool easy and safe to operate, Wear eye protection. and, with proper care, it will give you many years Wea
Summary of the content on the page No. 4
e. When operating a power tool outdoors, use an General safety instructions extension cord suitable for outdoor use. Use of a cord WARNING. Read all instructions. Failure to follow all suitable for outdoor use reduces the risk of electric shock. instructions listed below may result in electric shock, 3. Personal safety fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated a. Stay alert, watch what you are
Summary of the content on the page No. 5
• Always wear safety glasses and using hearing b. Do not use the power tool if the switch does not turn protection during operation. Exposure to noise may it on and off. Any power tool that cannot be controlled cause hearing loss. with the switch is dangerous and must be repaired. • Do not wear loose fitting clothing and jewellery which c. Disconnect the plug from the power source before may become caught in moving parts and result in making any adjustments,
Summary of the content on the page No. 6
• Remove the plug from the socket before carrying out any If in doubt, do not plug in the tool. Using a power source adjustment, servicing or maintenance. with a voltage less than the nameplate rating is harmful to the motor. • When an extension cable is required, you must ensure it has the right ampere rating for your power tool and is in a The tool must be used only for its prescribed purpose. safe electrical condition. Any use other than those mentioned in this Manual will be considere
Summary of the content on the page No. 7
Contents of carton Assembly • 1/2” Impact wrench The GMC impact wrench is packed, fully assembled except for the impact socket. Please select the required impact • Kitbox socket and insert correctly (refer to the socket change • Instruction manual section of this manual). 7
Summary of the content on the page No. 8
Know your product 1. Drive Shank 2. Trigger Switch 3. Replaceable Brushes 3 4. Handle/Grip 5. Power Cord 4 5 8
Summary of the content on the page No. 9
Unpacking Operation Due to modern mass production techniques, it is unlikely Starting & stopping that your GMC Power Tool is faulty or that a part is missing. 1. Check the rating label on If you find anything wrong, do not operate the tool until the the impact wrench indicates parts have been replaced or the fault has been rectified. 230V–240V. Failure to do so could result in serious personal injury. 2. Plug the cordset into the Assembly mains socket. Installing and Removing Sockets
Summary of the content on the page No. 10
WARNING. Wear safety goggles, a dust mask and ear Using the impact wrench defenders. The impact wrench can be used for driving nuts and WARNING. Do not use the impact wrench in wet or bolts using an impact socket and is suitable for many damp conditions. DIY applications. Operating the Impact Wrench Trouble shooting Correct fastening torque may be determined by the kind Trouble Problem Suggested remedy of bolt, the size of the bolt or the material of the workpiece. Ensure that
Summary of the content on the page No. 11
Maintenance Brush replacement WARNING. Always ensure that the tool is switched off and The impact wrench has externally accessible brush the plug is removed from the power point before making any assemblies that should be periodically checked for wear. adjustments or maintenance procedures. To check and replace the brushes follow the below instructions. 1. Keep the tool’s air vents unclogged and clean at all times. 1. Unplug the impact wrench. 2. Regularly check to see if any dust or foreig
Summary of the content on the page No. 12
GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 300 880 00 (Australia) or 0800 445 7 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservice.com.au. Should you not have access to the Internet, please contact our service department on 300 880 00 (Australia) or 0800 445 7 (New Zealand). 7am –7pm, 7days a week (AEST). Please
