Summary of the content on the page No. 1
Operating Cover_5.5x8.5_AIM_3L.fm Page 1 Tuesday, April 19, 2011 12:29 PM
®
CINEMATE 1 SR
DIGITAL HOME THEATER SPEAKER SYSTEM
2011 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM342773 Rev 00
Operating Guide | Guía del usuario | Guide d’utilisation
Summary of the content on the page No. 2
HersheyOperation.book Page 2 Thursday, March 31, 2011 11:16 AM Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
Summary of the content on the page No. 3
HersheyOperation.book Page 3 Thursday, March 31, 2011 11:16 AM CONTENTS CONTROLS AND INDICATORS 4 Universal remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Basic functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Turning the system on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Controlling the volume . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
HersheyOperation.book Page 4 Thursday, March 31, 2011 11:16 AM CONTROLS AND INDICATORS Universal remote control ® The CineMate 1 SR system includes a universal remote that can be programmed to control your TV, DVD or Blu-ray Disc™ player, cable/satellite box, and VCR. With this universal remote, you can enjoy the convenience of using only one remote control for all your home theater equipment. Basic functions Turning the system on and off The system power button turns the CineMate 1 SR sy
Summary of the content on the page No. 5
HersheyOperation.book Page 5 Thursday, March 31, 2011 11:16 AM CONTROLS AND INDICATORS Source buttons 3. Press and hold until all five source buttons light. The remote is now in the setup mode. 4. Press . Only this button will remain lit. Source power buttons 5. On the number keypad, enter the device code for your brand of TV. The TV source button ( ) should blink twice and then turn off. Note: If all five source buttons flash rapidly three times, the code was invalid. Go back to Step 1
Summary of the content on the page No. 6
03.H_Basics.fm Page 6 Thursday, March 31, 2011 11:22 AM CONTROLS AND INDICATORS Reading the system indicators Speaker array indicators Status Power Power indicator: Solid white..................................... Power on Fast blinking white........................ System is muted Very fast blinking white................. System volume has reached the max or min limit Status indicator: ® Off .................................................. Speaker array and Acoustimass module are connected
Summary of the content on the page No. 7
HersheyOperation.book Page 7 Thursday, March 31, 2011 11:16 AM CONTROLLING SOURCES Changing the source control mode You can easily switch control from one source to another by pressing the appropriate source button at the top of the remote. In addition to controlling the selected source, the remote will always control the basic speaker functions (on/off, volume, mute) of ® your CineMate 1 SR system. To control a source: 1. Press the power button ( ) for the source you want to turn on. 2. Pr
Summary of the content on the page No. 8
HersheyOperation.book Page 8 Thursday, March 31, 2011 11:16 AM CONTROLLING SOURCES Watching TV To watch TV using your cable/satellite set-top box: 1. Press the TV power button to turn on your TV. TV power 2. Press the TV Input button to select the correct input on your TV. 3. Press the CBL-SAT power button to turn on your cable/satellite set-top box. CBL-SAT power 4. Press the CBL-SAT source button to switch to cable/satellite mode. CBL-SAT source The CBL-SAT button flashes to verify that th
Summary of the content on the page No. 9
HersheyOperation.book Page 9 Thursday, March 31, 2011 11:16 AM CONTROLLING SOURCES To watch TV using the tuner in your TV: 1. Press the TV power button to turn on your TV. TV power 2. Press the TV Input button to select the correct input on your TV. 3. Press the TV source button to switch to the TV mode (the TV button will flash). TV source 4. Select a channel. Watching a DVD or Blu-Ray™ disc 1. Press the TV power button to turn on your TV. TV power 2. Press the TV Input button to select the
Summary of the content on the page No. 10
HersheyOperation.book Page 10 Thursday, March 31, 2011 11:16 AM CONTROLLING SOURCES Navigating on-screen menus and guides The menu and program selection buttons will control only one source at a time. Select the source you want to use first. Note: If some navigation functions are not working for a particular source, try programming a different device code into the remote. Displays the menu of the selected source Exits onscreen menus and Displays details of items in program guides an elec
Summary of the content on the page No. 11
HersheyOperation.book Page 11 Thursday, March 31, 2011 11:16 AM CONTROLLING SOURCES Using playback controls The functionality of the source playback buttons may vary depending on the type and brand of your device. For more information, see the owner’s guide that came with your device. Next disc in a Next DVD chapter or music multi-disc player CD track Previous disc in a multi-disc player Previous DVD chapter or music CD track Stop, Pause, or Play Start Instant Replay Start recording Sc
Summary of the content on the page No. 12
HersheyOperation.book Page 12 Thursday, March 31, 2011 11:16 AM CARE AND MAINTENANCE Troubleshooting Problem What to do ® No sound � Make sure the CineMate system is turned on and that the speaker array power indicator is on (solid white). � Make sure the CineMate system is not muted. � Increase the volume. � Verify the wireless connection between the speaker array and the ® Acoustimass module: ® � Press the ADAPTiQ button behind the sliding cover on the end of the speaker array. � The s
Summary of the content on the page No. 13
HersheyOperation.book Page 13 Thursday, March 31, 2011 11:16 AM CARE AND MAINTENANCE Problem What to do Remote control is � Check the battery to be sure it is installed properly or needs to be replaced. See “Replacing the remote batteries” on page 14. inconsistent or does not work � Point the remote control at the device you want to control. � Check that the remote button for the selected source flashes when you press the volume button. � Check that the power indicator on the speaker array
Summary of the content on the page No. 14
HersheyOperation.book Page 14 Thursday, March 31, 2011 11:16 AM CARE AND MAINTENANCE ® Pairing the Acoustimass module with the speaker array Your speaker array and Acoustimass module are paired at the factory. However, should you ever need to pair them for any reason, do the following: 1. Unplug the Acoustimass module AC power cord. 2. Remove the door on the end of the speaker array. ® 3. Press and hold the ADAPTiQ button for 3-4 seconds until the status indicator starts slowly blinking ora
Summary of the content on the page No. 15
HersheyOperation.book Page 15 Thursday, March 31, 2011 11:16 AM CARE AND MAINTENANCE Customer service ® For additional help in solving problems, contact Bose Customer Service. Refer to the ® address sheet included with the CineMate 1 SR system. Limited warranty ® Your CineMate 1 SR system is covered by a limited warranty. Details of the limited warranty are provided on the product registration card that is included in the carton. Please refer to the card for instructions on how to register
Summary of the content on the page No. 16
Operating Cover_5.5x8.5_AIM_3L.fm Page 1 Monday, March 21, 2011 2:43 PM ® CINEMATE 1 SR DIGITAL HOME THEATER SPEAKER SYSTEM 2011 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM342773 Rev 00 Operating Guide | Guía de usuario | Notice d’utilisation
