Summary of the content on the page No. 1
User manual
RTD317
3 7
AUXI N
2
It is important to read this instruction book prior to using your new product for the first time.
Summary of the content on the page No. 2
FCC Information This device complies with Part 15 of the FCC Ventilation Rules. Operation is subject to the following You must adequately ventilate the product. two conditions: (1) This device may not Make sure there is adequate space around EN cause harmful interference, and (2) this the unit to provide proper air flow for device must accept any interference ventilation. See diagram. received, including interference that may cause undesired operation. 7 cm 7 cm This equipment has been te
Summary of the content on the page No. 3
Important Information For your safety Service information The AC power plug is This product should be serviced only by polarized (one blade is those specially trained in appropriate EN wider than the other) servicing techniques. For instructions on how and only fits into AC to obtain service, refer to the warranty power outlets one way. included in this Guide. If the plug won’t go into RFC: CTM-9800723-KS5 the outlet completely, Main plug is used as the disconnect device, it turn the plug
Summary of the content on the page No. 4
Important Information Important battery information CAUTION controls or adjustments or performance new and old batteries. Do not use EN rechargeable batteries. of procedures other than those specified herein may result in observe the polarities indicated inside the battery compartment. Replace only with open covers and do not repair yourself. Refer servicing to qualified personnel. the type of batteries specified. Do not dispose of them in a fire or recharge them. rain or moisture. No ob
Summary of the content on the page No. 5
Important Safety Instructions Please read and save for • Unplug this apparatus during lightning storms or when unused for long periods future reference of time. Some of the following information may not • Refer all servicing to qualified service EN apply to your particular product; however, as personnel. Servicing is required when the with any electronic product, precautions apparatus has been damaged in any way, should be observed during handling and such as power-supply cord or plug
Summary of the content on the page No. 6
Table of Contents Connections and Setup ......... 1 USB Device ......................... 17 Connecting to your TV (VIDEO).................... 2 Connecting/Disconnecting USB devices to the Main Unit Connecting to your TV (via HDMI input) EN USB Device Playback Features Connecting AUDIO from external sources such a TV (Aux-in) Aux-In ..................................... 17 Connecting the speakers..................... 4 Connecting auxiliary components Positioning speakers ..............
Summary of the content on the page No. 7
Connections and Setup Accessories provided EN + - + - Remote control and Left and right Center speaker Subwoofer Left and right 2 AAA batteries front speakers Surround Speakers One external AM Composite One Pig-Tail loop antenna Video Cable antenna wire Things to consider before • The humidity of the room should not exceed 75%. If you have to use the unit you connect outdoors, do not expose it to rain or • Ensure that the mains supply in your house splashing water. The a
Summary of the content on the page No. 8
Connections and Setup Method 2 Connecting the antennas Component video jacks (Pr, Pb, Y) • The component video jacks are color-coded EN FM 75 Ω green, blue and red. • Additional component video cables (not Whit e supplied) are required to provide best picture quality. They are usually color-coded green, Antenna blue and red. • Connect the component video OUT jacks on the GN D receiver to the component video IN jacks on your TV so the video content goes from the The AM and FM antennas conn
Summary of the content on the page No. 9
Using AUX IN 2 jacks Connecting to your TV (via HDMI Connect the AUX IN 2 jacks on the front panel of input) the unit to the AUX OUT (AUDIO OUT) jacks on HDMI stands for High Definition Multimedia EN VCR, TV, Set Top Box or other component. Interface. HDMI transfers digital audio and uncompressed digital video on a single cable. Press the HDMI button on the remote control to change output signals as follows: 480p, 720p, A UX I N 2 1080i and 1080p. A U X I N 2 White Red TV A u d i o c a
Summary of the content on the page No. 10
Connecting the speakers Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the terminal and insert the wire. Release the tab to lock wire in the terminal. EN Front Speakers Center Speaker Right Left Green/Grey or BlackStriped Purple/Grey or BlackStriped Red/Grey White/Grey or Black or Black Striped Striped SPEAKERS Subwoofer SR SL SUB CEN FR FL 4 3 4
Summary of the content on the page No. 11
Connections and Setup Positioning speakers Front speaker placement For best results, follow the speaker placement 3 below. EN 1 Alignment Align the center speaker evenly with (A) or slightly behind (B) (the left and right speakers), but not ahead of them. 2 1 4 3 Courtesy Dolby Laboratories 1. Left, Right (Front Speakers) Front speakers carry primarily music and sound effects. Angle Place the left and right speakers to form a 2. Center 45-degree angle with your favorite viewing In surroun
Summary of the content on the page No. 12
No adjacent walls Better surround placement Surround speakers can go on stands facing each other to approximate sidewall mounting Location (A), or to the sides or rear of the viewing area, If possible, place surround speakers to either aimed upwards; they can go right on the side of the listening area, not behind it. floor, or preferably, a few feet off the floor EN such as on end tables (B). Height If space permits, install surround speakers 2-3 feet above viewers. This helps to minimize
Summary of the content on the page No. 13
Overview of Controls Front panel controls EN Opens and closes Stops disc Starts/pause Adjusts the Switches the the disc tray. playback. playing a disc. volume. unit on and off. AUXI N 2 AUX IN jacks - Connects USB Toggles between Selects the input sources. connects audio devices for different Press repeatedly to select: devices. playing music subwoofer • DVD – to watch DVD videos and photos. output levels • TUNER – to listen to the radio (among soft/ • USB – to play files stored on a balance/
Summary of the content on the page No. 14
AUDIO – Accesses the audio function (p.12). ANGLE – Accesses the camera angle function for DVD disc (p.13). EN ZOOM – Accesses the Zoom function (p.10, 15). SUBTITLE – Selects the subtitle languages or turns subtitle off (if available) (p.12). HDMI – Changes video output signals (480p, 720p, 1080i or 1080p) (p.14). SUBWOOFER – Selects among subwoofer output levels (soft/balance/strong/powerful). RANDOM – Turns on/off random playback on CDDA/mp3/wma/jpeg discs. REPEAT – Accesses the repea
Summary of the content on the page No. 15
Overview of Controls Using remote control to navigate Note: Insert 2 "AAA"("UM-4"/"R03") through the on-screen menus batteries to the remote control prior to Use and OK on the remote control to navigate EN use. through the on-screen displays (the DVD player’s menu, the Info Display that appears during playback, or a disc’s menu). Use on the remote to move through on-screen menus in the direction of the arrow button (e.g., to move right, press >). The arrow buttons are used to highligh
Summary of the content on the page No. 16
Basic playback operations Zoom 1. While a disc is playing, press ZOOM until Playback you reach the zoom size you want. The Switch the unit and the TV set on. EN ZOOM button toggles through 2x, 3x, 4x 1. After loading a disc, playback starts and then zooms out to 1/2x, 1/3x and 1/4x, automatically, or the disc menu appears. then returns to normal playback. If the disc menu appears, select the Play 2. Move from one area to another (pan) option to begin playback. using the arrow buttons.
Summary of the content on the page No. 17
Playing Discs - Basic Functions Notes: minutes without any user interaction, a • When you press STOP, the unit stores the screen saver is activated. At the end of point where playback was interrupted. If 30 minutes without any user interaction, EN you press PLAY again, playback resumes the unit switches off automatically. from this point. To stop playback completely or to start again from the beginning, press STOP twice. If the unit is left in STOP mode for more than five The Info Menu U
Summary of the content on the page No. 18
This option is only available if the disc offers Title/chapter (DVD)/track dialog languages or audio formats. When (audio CD ) you change the dialog language using the To directly access a title, chapter (DVD) or a Info menu, it only changes the dialog track (audio CD), press INFO, press OK. language of the disc being played. When Select the Title(TT), Track(TRK) or you eject the disc or switch off the unit, the EN Chapter(CH) icon and enter a number language will revert to the one you
Summary of the content on the page No. 19
The Info Menu Camera angle (DVD) Creating a Program List for Some discs offer different camera angles for Program Play Mode (Audio specific scenes. EN CDs and DVD discs) 1. To change the camera angle, press the ANGLE button on the remote or press the To use program play mode, you must first INFO button twice and select the Camera create a program list. angle icon with the left/right buttons. 1. To create a program list, press the INFO 2. Choose the angle with the up/down button three ti
Summary of the content on the page No. 20
Creating a program List for Note: This function is only available with discs whose elapsed program play mode (mp3 CDs) time or remaining time appears in EN To use program play mode with an mp3 disc, the Info menu. you must first create a program list. You can program up to 16 songs. 1. To create a program list, press the INFO Sleep button twice. Highlight the Play Mode 1. Press INFO twice for CD and three option and press the down arrow to select times for DVD. Select Sleep icon with t
