Summary of the content on the page No. 1
TH-S1[USUBUN]CoverSafety.book Page 1 Monday, August 2, 2004 2:37 PM
DVD DIGITAL CINEMA SYSTEM
TH-S1
Consists of XV-THS1, SP-WS1, SP-THS1F, and SP-THS1S
,,
XV-THS1 SP-WS1 SP-THS1F SP-THS1S
INSTRUCTIONS
GVT0141-003A
[US/UN/UB]
Summary of the content on the page No. 2
TH-S1[USUBUN]CoverSafety.book Page 1 Monday, August 2, 2004 2:37 PM Warnings, Cautions and Others/ CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION— button! (XV-THS1) Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The button in any position does not disconnect the mains line. • When the system is on standby, the STANDBY lamp lights re
Summary of the content on the page No. 3
TH-S1[USUBUN]CoverSafety.book Page 2 Monday, August 2, 2004 2:37 PM Caution: Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are shown below: Wall or obstructions Wall or 8 cm Front XV-THS1 obstructions XV-THS1 3 cm 3 cm 10 cm No obstructions 15 cm Front view Side view G-2
Summary of the content on the page No. 4
TH-S1[USUNUB]-f.book Page 1 Monday, August 2, 2004 1:55 PM Table of contents Introduction .....................................2 Playback ........................................16 Notes on handling .................................................................2 Basic playback ....................................................................16 Supplied accessories ............................................................2 One Touch Replay .............................................
Summary of the content on the page No. 5
TH-S1[USUNUB]-f.book Page 2 Monday, August 2, 2004 1:55 PM Introduction 7 Safety precautions Notes on handling Avoid moisture, water and dust Do not place the system in moist or dusty places. 7 Important cautions Avoid high temperatures Installation of the system Do not expose the system to direct sunlight and do not place it near • Select a place which is level, dry and neither too hot nor too cold; a heating device. between 5°C and 35°C. When you are away Leave sufficient distance betwe
Summary of the content on the page No. 6
TH-S1[USUNUB]-f.book Page 3 Monday, August 2, 2004 1:55 PM About discs Region code of DVD VIDEO DVD VIDEO players and DVD VIDEO discs have their own Playable disc types Region Code numbers. This system can play back DVD VIDEO discs whose Region Code numbers include the system’s Region This system has been designed to play back the following discs: Code, which is indicated on the rear panel. DVD VIDEO, Video CD (VCD), Super Video CD (SVCD), Audio CD (CD), CD-R and CD-RW. Example of playabl
Summary of the content on the page No. 7
TH-S1[USUNUB]-f.book Page 4 Monday, August 2, 2004 1:55 PM About discs Notes on CD-R and CD-RW Notes on MP3 files User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can Tag information (album name, artist name, and track name) can be played back only if they are already “finalized”. be shown on the TV. (See page 24.) When making your own disc, select ISO 9660 Level 1 or Level 2 The system can play back the MP3 files recorded at 32 kbps to for the disc format. 320 kbps as a bit r
Summary of the content on the page No. 8
TH-S1[USUNUB]-f.book Page 5 Monday, August 2, 2004 1:55 PM Index of parts and controls The numbers in the figures indicate the pages where the details of the parts are described. Front panel (center unit) Display window 21 36 17 21 15 17 17 17 17 17 35 35 36 29 Disc tray (inside): 16 16 13 16 16 14 14 14 13 16 18 18 Remote sensor: 6 Rear panel (center unit) See below (except for Hong Kong). 37 9 9 7 10 8 10 10 Setting the VOLTAGE SELECTOR (except for Hong Kong) Before plugging, set the correc
Summary of the content on the page No. 9
TH-S1[USUNUB]-f.book Page 6 Monday, August 2, 2004 1:55 PM Index of parts and controls Remote control Putting batteries in the remote control 13 16 11 11 12 14 R6P (SUM-3)/AA (15F) 14 type dry-cell batteries (supplied) 26 17 21 26 14 11 11 – 36 11 16 18, 35 18 16, 36 23 23 16, 36 If the range or effectiveness of the remote control decreases, replace both batteries. 15, 31 CAUTION Do not expose batteries to heat or flame. 12, 18 21 19 Operating the system from the remote 25 control Number
Summary of the content on the page No. 10
TH-S1[USUNUB]-f.book Page 7 Monday, August 2, 2004 1:55 PM Do not connect the power cord until all other connections have been made. Connections If reception is poor Connecting the FM and Center unit AM antennas AM loop antenna 7 AM loop antenna Setting up supplied AM loop antenna Outdoor single vinyl-covered wire antenna (not supplied) If the antenna cord is covered with the insulation 7 FM antenna coat, twist and pull the insulation coat off and remove. FM antenna (supplied) Center u
Summary of the content on the page No. 11
TH-S1[USUNUB]-f.book Page 8 Monday, August 2, 2004 1:55 PM Do not connect the power cord until all other connections have been made. Connections Connecting the satellite (front, center, surround) speakers and the subwoofer Front speakers Center speaker Speaker cord Connect the black cords to the black (-) terminals. Connect the white cords to the red (+) terminals. Before connecting the speaker cords; Twist and pull the insulation coat off and remove. Subwoofer Surround speakers Wh
Summary of the content on the page No. 12
TH-S1[USUNUB]-f.book Page 9 Monday, August 2, 2004 1:55 PM Do not connect the power cord until all other connections have been made. Connections Speaker layout Connecting a TV Distortion of picture may occur when connecting the TV via a Center speaker VCR, or to a TV with a built-in VCR. Front left Front right You need to set “MONITOR TYPE” in the PICTURE menu speaker speaker correctly according to the aspect ratio of your TV. (See page 32.) Subwoofer 7 To connect a TV equipped with t
Summary of the content on the page No. 13
TH-S1[USUNUB]-f.book Page 10 Monday, August 2, 2004 1:55 PM Do not connect the power cord until all other connections have been made. Connections Connecting to an analog Connecting to a digital component component You can enjoy the sound of an analog component. You can enjoy the sound of a digital component. Center unit Center unit DBS* tuner MD recorder To digital optical RCA pin plug cord Digital optical cord output (not supplied) (not supplied) * DBS = Direct Broadcasting Satellite To
Summary of the content on the page No. 14
TH-S1[USUNUB]-f.book Page 11 Monday, August 2, 2004 1:55 PM Operating external components with the remote control 4 Press number buttons (1-9, 0) to enter The buttons described below are used on pages 11 and 12. the manufacturer’s code (2 digits). Examples: For a Hitachi TV: Press 1, then 0. For a Toshiba TV: Press 0, then 8. Manufacturer Code Manufacturer Code JVC 01 Samsung 12 Hitachi 10 Sanyo 13 Magnavox 02 Sharp 06 Mitsubishi 03 Sony 07 Remote control Panasonic 04, 11 Toshiba 08 mode s
Summary of the content on the page No. 15
TH-S1[USUNUB]-f.book Page 12 Monday, August 2, 2004 1:55 PM See page 11 for button locations. Operating external components with the remote control 7 Operation Operating the VCR Aim the remote control at the VCR. IMPORTANT 7 To set the manufacturer’s code Before using the remote control to operate a VCR; Set the remote control mode selector to VCR. 1 Slide the remote control mode selector The following buttons are available: to VCR. VCR VCR:Turns VCR on and off. 2 Press and hold VCR. 3 (pla
Summary of the content on the page No. 16
TH-S1[USUNUB]-f.book Page 13 Monday, August 2, 2004 1:55 PM Basic operations The buttons on the remote control are used to explain most of the Turning the system on/off operations in this manual. You can use the buttons on the center unit same as on the remote control for operations unless On the remote control: otherwise noted. Press AUDIO. IMPORTANT On the center unit: Before using the remote control for the following Press . operation, AUDIO Set the remote control mode selector to A
Summary of the content on the page No. 17
TH-S1[USUNUB]-f.book Page 14 Monday, August 2, 2004 1:55 PM See page 13 for button locations. Basic operations Selecting the source to Listening with headphones play (not supplied) On the remote control: CAUTION Be sure to turn down the volume; Press one of the source selecting buttons Before connecting or putting on headphones as high volume may (DVD, FM/AM, AUX or AUX DIGITAL). damage both the headphones and your hearing. DVD: To play back a disc (DVD VIDEO, VCD etc.). (See Before d
Summary of the content on the page No. 18
TH-S1[USUNUB]-f.book Page 15 Monday, August 2, 2004 1:55 PM See page 13 for button locations. Basic operations Sleep Timer [SLEEP] Changing the scan mode The system turns off automatically when the specified period of The system can be accommodated to your TV’s scan mode. time has passed. To use the system in progressive mode, it is required that the center unit is connected to the TV using a component video cord Press SLEEP. (not supplied) in advance. (See page 9.) Each time you press th
Summary of the content on the page No. 19
TH-S1[USUNUB]-f.book Page 16 Monday, August 2, 2004 1:55 PM Playback The mark shows the types of discs the operation is available Basic playback for. 1 Press OPEN/CLOSE. IMPORTANT The system turns on and the disc Before using the remote control for the tray comes out. following operation; AUDIO 0 on the center unit functions same 1 Set the remote control mode selector to as OPEN/CLOSE on the remote AUDIO. control. 2Press DVD. 2 Place a disc. The buttons described below are used o
Summary of the content on the page No. 20
TH-S1[USUNUB]-f.book Page 17 Monday, August 2, 2004 1:55 PM See page 16 for button locations. Playback MP3 disc 7 Playback information on the display window Signal and speaker DVD VIDEO indicators Track number Example: When a DVD VIDEO encoded with Dolby Digital 5.1ch is played TR1 23 12 : 3 4 Elapsed playing time (hour:minute:second) Chapter number MP3 indicator Elapsed playing time (minute:second) (during playback only) C1 0:02:31 Pressing FL DISP. Signal and speaker indicators (See page 2
