Summary of the content on the page No. 1
3-283-036-11(3)
DVD Home Theatre
System
Operating Instructions
DAV-DZ260
©2008 Sony Corporation
Summary of the content on the page No. 2
disposed of correctly, you will help prevent potential negative consequences for the environment and human WARNING health, which could otherwise be caused by inappropriate waste handling of this product. The To reduce the risk of fire or electric recycling of materials will help to conserve natural shock, do not expose this apparatus to resources. For more detailed information about rain or moisture. recycling of this product, please contact your local Civic Office, your household waste
Summary of the content on the page No. 3
Precautions About This Operating On power sources � AC power cord (mains lead) must be changed only at Instructions the qualified service shop. � The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall � The instructions in this Operating Instructions outlet (mains), even if the unit itself has been turned describe the controls on the remote. You can off. also use the controls on the unit if they have the � Install this system so that the AC pow
Summary of the content on the page No. 4
Table of Contents About This Operating Instructions..........3 Other Operations Playable Discs.........................................5 Getting Optimal Surround Sound for a Getting Started Room .............................................. 71 Calibrating the Appropriate Settings Step 1: Positioning the System ...10 Automatically................................. 72 Step 2: Connecting the System...13 Controlling the TV with the Supplied Step 3: Performing the Quick Remote ...................
Summary of the content on the page No. 5
Playable Discs Type Disc logo Characteristics Icon DVD VIDEO � DVD VIDEO � DVD-R/DVD-RW in DVD VIDEO format or video mode � DVD+R/DVD+RW in DVD VIDEO format VR (Video � DVD-R/DVD-RW in VR (Video Recording) mode Recording) mode (except for DVD-R DL) Super Audio CD � Super Audio CD VIDEO CD � VIDEO CD (Ver. 1.1 and 2.0 discs) � Super VCD � CD-R/CD-RW/CD-ROM in video CD format or Super VCD format CD � Audio CD � CD-R/CD-RW in audio CD format DATA CD – � CD-R/CD-RW/CD-ROM in DATA C
Summary of the content on the page No. 6
2) JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera File system”: Image standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association (JEITA).) 3) Except for United Kingdom and North American models. 4) ® DivX is a video file compression technology, developed by DivX, Inc. 5) DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. 6) A logical format of files an
Summary of the content on the page No. 7
About Multi Session CD � This system can play a Multi Session CD when an MP3 file is contained in the first session. Any subsequent MP3 files recorded in later sessions can also be played back. � This system can play a Multi Session CD when a JPEG image file is contained in the first session. Any subsequent JPEG image files recorded in later sessions can also be played back. � If MP3 files and JPEG image files in music CD format or video CD format are recorded in the first session, only the
Summary of the content on the page No. 8
Getting Started Unpacking � Front speakers (2) and � AM loop antenna (aerial) (1) � R6 (size AA) batteries (2) surround speakers (2) � Calibration mic (1) � FM wire antenna (aerial) (1) � Center speaker (1) or � Foot pads (1 set) � Speaker cords (6, red/white/ � Subwoofer (1) green/gray/blue/purple) � Operating Instructions � Speaker and TV connections (card) � Remote commander (remote) (1) GB 8 Getting Started
Summary of the content on the page No. 9
Getting Started Inserting batteries into the remote Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment. To use the remote, point it at the remote sensor on the unit. Note � Do not leave the remote in an extremely hot or humid place. � Do not use a new battery with an old one. � Do not drop any foreign object into the remote casing, particularly when replacing the batteries. � Do not expose the remote sensor to dire
Summary of the content on the page No. 10
Step 1: Positioning the System For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A). However, this system allows you to place the center speaker up to 1.6 meters (5 ft) closer (B) and the surround speakers up to 5.0 meters (16 ft) closer (C) to the front speakers. The front speakers can be placed from 1.0 to 7.0 meters (3 to 23 ft) (A) from the listening position. Place the system as illustrated be
Summary of the content on the page No. 11
Getting Started To install the speakers on a wall Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Color tube Front speaker (L): White Front speaker (R): Red Center speaker: Green Surround speaker (L): Blue Surround speaker (R): Gray 1 Prepare screws (not supplied) that are suitable for the
Summary of the content on the page No. 12
Note � Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. � Contact a screw shop or installer regarding the wall material or screws to be used. � Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natu
Summary of the content on the page No. 13
Getting Started Step 2: Connecting the System See the connection diagram below, and read the additional information from 1 to 5 on the following pages. Note � Be sure to make connections securely to avoid hum and noise. � When you connect another component with a volume control, turn up the volume of the other components to a level where sound is not distorted. 3 DIGITAL MEDIA PORT adapter 3 Portable audio source 2 TV 4 AM loop antenna (aerial) 4 FM wire antenna (aerial) 5 AC power cord (main
Summary of the content on the page No. 14
1 Connecting the Speakers The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation in the speaker terminals. Rear of speaker Color tube (+) (–) Connector When connecting to the unit, insert the connector until it clicks. Rear p
Summary of the content on the page No. 15
Getting Started 2 Connecting the TV For video output to your TV, check the video input jacks of the TV, and select connection method A or B. Picture quality improves in order from A (standard) to B (HDMI). When the TV has the digital optical or coaxial output jack, you can improve sound quality by connecting with the digital cord (A). Digital optical cord (not supplied) Digital coaxial cord (not supplied) or To the digital coaxial output jack of the TV To the digital optical output ANTENNA S
Summary of the content on the page No. 16
3 Connecting the other components You can enjoy the connected component using the six speakers of the system. � Portable audio source: A � DIGITAL MEDIA PORT adapter: B Stereo mini-plug cord (not supplied) To the portable audio source Front panel (USB) port (See page 60.) ANTENNA SPEAKER FRONT R FRONT L SUR R SUR L Rear panel COAXIAL 75 FM AM SPEAKER DIGITAL IN EURO AV CENTER SUBWOOFER DC5V COAXIAL OPTICAL 0.7A MAX OUTPUT(TO TV) TV HDMI OUT DMPORT DIGITAL MEDIA PORT adapter (not supplied) To c
Summary of the content on the page No. 17
Getting Started If your TV has multiple audio/video inputs You can enjoy the sound with the speakers of the system through the connected TV. Connect the components as follows. VCR, digital satellite receiver TV or PlayStation, etc. VCR, digital satellite receiver or PlayStation, etc. System :Signal flow Select the component on the TV. For details, refer to the operating instructions of the TV. If the TV does not have multiple audio/video inputs, a switcher will be necessary to receive the sou
Summary of the content on the page No. 18
4 Connecting the antenna (aerial) AM loop antenna (aerial) (supplied) A B Note � Cord (A) or cord (B) can be connected to either terminal. ANTENNA SPEAKER Rear panel FRONT R FRONT L SUR R SUR L COAXIAL 75 FM AM SPEAKER DIGITAL IN EURO AV CENTER SUBWOOFER DC5V COAXIAL OPTICAL 0.7A MAX OUTPUT(TO TV) TV HDMI OUT DMPORT FM wire antenna (aerial) (supplied) or Note � Keep the AM loop antenna (aerial) and cord away from the system or other AV components, as noise may result. � Be sure to fully extend
Summary of the content on the page No. 19
Getting Started 5 Connecting the AC power cord (mains lead) Before connecting the AC power cord (mains lead) of the unit to a wall outlet (mains), connect all the speakers to the unit. Rear panel ANTENNA SPEAKER FRONT R FRONT L SUR R SUR L COAXIAL 75 AM FM SPEAKER DIGITAL IN EURO AV CENTER SUBWOOFER DC5V COAXIAL OPTICAL 0.7A MAX TV HDMI OUT DMPORT OUTPUT(TO TV) To the wall outlet (mains) About the demonstration After connecting the AC power cord (mains lead), the demonstration appears in the fr
Summary of the content on the page No. 20
LANGUAGE SETUP Step 3: Performing the OSD: ENGLISH MENU: ENGLISH AUDIO: FRENCH Quick Setup SUBTITLE: SPANISH PORTUGUESE Follow the Steps below to make the basic adjustments for using the system. Note � When you connect the system and the TV with the 5 Press X/x to select a language. HDMI cable (not supplied), you need to set the type The system displays the menu and subtitles of video output for matching your TV. For details, see in the selected language. “Setting the type of video output
