Summary of the content on the page No. 1
TS100-E4/PI2
Pedestal Server
User Guide
Summary of the content on the page No. 2
E2791 First Edition V1.00 February 2007 Copyright 2007© ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS provides this manual “as is” without warr
Summary of the content on the page No. 3
Contents Notices ................................................................................................vii Safety information .............................................................................viii About this guide .................................................................................. ix Chapter 1: Product introduction 1.1 System package contents ......................................................... 1-2 1.2 System specifications ...............................
Summary of the content on the page No. 4
Contents 3.2 Jumpers ..................................................................................... 3-5 3.3 Connectors .............................................................................. 3-10 3.3.1 Rear panel connectors .............................................. 3-10 3.3.2 Internal connectors ................................................... 3-11 Chapter 4: BIOS Setup 4.1 Managing and updating your BIOS ............................................. 4-2 4.1.1 Creating a bo
Summary of the content on the page No. 5
Contents 4.4.7 Onboard Devices Configuration ................................. 4-26 4.4.8 PCI PnP ...................................................................... 4-27 4.5 Power Configuration ................................................................. 4-28 4.5.1 APM Configuration ..................................................... 4-28 4.5.2 Hardware Monitor ...................................................... 4-30 4.6 Boot menu ...................................................
Summary of the content on the page No. 6
Contents 5.4 Global Array Manager ............................................................... 5-34 Chapter 6: Driver installation 6.1 RAID driver installation ............................................................... 6-2 6.1.1 Creating a RAID driver disk.......................................... 6-2 6.1.2 Installing the RAID controller driver ............................ 6-3 6.2 LAN driver installation ............................................................. 6-13 ® 6.2.1 Windows 2
Summary of the content on the page No. 7
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
Summary of the content on the page No. 8
Safety information Electrical Safety • Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged. • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing any additional devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all po
Summary of the content on the page No. 9
About this guide Audience This user guide is intended for system integrators, and experienced users with at least basic knowledge of configuring a server. Contents This guide contains the following parts: 1. Chapter 1: Product Introduction This chapter describes the general features of the server, including sections on front panel and rear panel specifications. 2. Chapter 2: Hardware setup This chapter lists the hardware setup procedures that you have to perform when installing or removing sy
Summary of the content on the page No. 10
Conventions To make sure that you perform certain tasks properly, take note of the fol- lowing symbols used throughout this manual. WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and information to aid in completing a task. Typography Bold text Indicates a menu or an item to select. Italics U
Summary of the content on the page No. 11
Chapter 1 This chapter describes the general features of the barebone server, including sections on the front panel and rear panel specifications. 1- Product introduction
Summary of the content on the page No. 12
1.1 System package contents Check your ASUS TS100-E4/PI2 package with the items on the following table. The package contents vary for the following configurations: Check your system package for the following items. Chassis ASUS T10 Non-rackable Tower chassis Motherboard ASUS P5M2-M/C_TS100-E4 motherboard Components 2 50W Single power supply (110/230V Switching Selection) 1 x Standard 16x DVD-ROM or standard DVD-RW (Optional) Active CPU Cooler Cables AC power cable SATA cables
Summary of the content on the page No. 13
1.2 System specifications The ASUS TS100-E4/PI2 is a server system featuring the ASUS P5M2-M/ ® ® C_TS100-E4 motherboard. The server supports the Intel Xeon ® 3000/3200 or Pentium D (D-stepping) series Processors, and includes the latest technologies through the chipsets embedded on the motherboard. Chassis T10 non-rackable Tower Chassis Motherboard ASUS P5M2-M/C_TS100-E4 ® Chipset NorthBridge: Intel Xeon 3000 chipset (Mukilteo-2) ® SouthBridge: Intel ICH7R ® ® ® CPU LGA775 socket for Intel X
Summary of the content on the page No. 14
Hardware Voltage, temperature, and fan speed monitoring Automatic System Restart (ASR) feature monitors Power supply 250W single power supply, 100V~130Vac/200~260Vac by switching setting; 50Hz~60Hz, 24pin + 4pin power connector Dimensions 192 mm (W) x 490 mm (D) x 426 mm (h) Net Weight 13.5 kg Refer to "Chapter 3 Motherboard information" for details on the internal connectors. 1-4 Chapter 1: Product introduction
Summary of the content on the page No. 15
1.3 Front panel features The TS100-E4/PI2 chassis displays a black stylish front panel. The power button, LED indicators, optical, and floppy drives are located on the front panel. Flip the front panel I/O ports cover to access the front panel USB ports. Front panel I/O ports cover Optical drive Empty 5.25-inch bays HDD LED Floppy disk drive Power button and LED Reset button USB ports ASUS TS100-E4/PI2 1-5
Summary of the content on the page No. 16
1.4 LED information The TS100-E4/PI2 comes with two LED indicators. Refer to the picture for the LED location and the table below for LED description. LED Icon Display Description Drive Activity LED Blinking Read/write data into the HDD Power LED ON System power ON Blinking Suspend mode 1.5 Rear panel features The rear panel includes a slot for the motherboard rear I/O ports, four full-length expansion slots, chassis cover locks, a vent for the system fan, and the power supply unit. Powe
Summary of the content on the page No. 17
1.6 Internal features The TS100-E4/PI2 chassis includes the basic components as shown. 12 1 13 4 2 3 14 5 15 6 16 7 11 8 10 9 1. Power supply 9. Floppy disk drive connector 2. Space for 9 cm system FAN 10. IDE connector 3. ASUS P5M2-M/C_TS100-E4 11. Serial ATA connectors 4. CPU socket and CPU Cooler 12. Optical drive (Standard/Optional) 5. DDR2 DIMM sockets 13. Empty 5.25-inch drive bays 6. PCI Express x8 slot (x4 Link) 14. Floppy disk drive 7. PCI Express x8 slot (x8 Link) 15. HDD bay 8. 2 x PC
Summary of the content on the page No. 18
1-8 Chapter 1: Product introduction
Summary of the content on the page No. 19
Chapter 2 This chapter lists the hardware setup procedures that you have to perform when installing or removing system components. 2- Hardware setup
Summary of the content on the page No. 20
2.1 Removing the side cover To remove the side cover: 1. Use a Philips screwdriver to remove the screw on the side cover. 2. Locate the two side cover locks. 1 2 1 2 3. Press the side cover locks outward, then pull the side cover toward the rear panel for about one-half inch. 3 3. Move the side cover to the direction of 4 the arrow. 4. Lift the side cover, then set aside. 4 2-2 Chapter 2: Hardware setup
