Summary of the content on the page No. 1
NCR 5972 2x20 Customer
Display
Release 2.0
Userʹs Guide
BD20‐1372‐A
Issue F
Summary of the content on the page No. 2
The product described in this book is a licensed product of NCR Corporation. NCR is a registered trademark of NCR Corporation. It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become available. NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of eq
Summary of the content on the page No. 3
Preface This manual is for hardware installer/service personnel, system integrators, field engineers, and programmers. Safety Requirements Warning: This device does not contain any user serviceable parts and should only be serviced by a qualified service technician. Caution: This device should only be powered by a (SELV) Safety Extra Low Voltage power supply source with an available power level of 5 amperes or less, and suitable for the country of installation. The power source must b
Summary of the content on the page No. 4
0-2 Chapter 1: Introduction
Summary of the content on the page No. 5
Chapter 1: Introduction 0-3 Table of Contents Chapter 1: Introduction Models....................................................................................................1‐1 Features..................................................................................................1‐1 VFD Models....................................................................................1‐1 Hardware....................................................................................1‐1 Softw
Summary of the content on the page No. 6
0-4 Chapter 1: Introduction Chapter 3: Installation Installing the Customer Display.........................................................3‐1 SELV Power Source Warning.......................................................3‐1 Installation Goal..............................................................................3‐2 Cable Requirements.......................................................................3‐2 Power Supply Choices....................................................
Summary of the content on the page No. 7
Chapter 1: Introduction 0-5 Enable Character Blink..................................................................4‐9 Disable Character Blink...............................................................4‐10 Move Cursor Left..........................................................................4‐10 Move Cursor Right.......................................................................4‐10 Move Cursor Up...........................................................................4‐11
Summary of the content on the page No. 8
0-6 Chapter 1: Introduction Revision Record Issue Date Remarks A Feb 97 First issue B Nov 98 Update to include 5972‐1100 C Mar 99 Added 5963 Integrated Display Mount D Jan 03 Removed 5972‐2x00 model. Added dimension information. E Feb 03 Added character sets. F June 03 Added new LCD models
Summary of the content on the page No. 9
Chapter 1: Introduction 0-7 Radio Frequency Interference Statements Federal Communications Commission (FCC) Information to User This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
Summary of the content on the page No. 10
0-8 Chapter 1: Introduction
Summary of the content on the page No. 11
Chapter 1: Introduction Models The NCR 5972 Customer Display is designed to be an optional display device for the NCR retail terminals. It can also serve as a display for any industry‐standard PC. It is a Vacuum Fluorescent Display (VFD). • 5972‐1000 2x20 VFD (Light Gray) • 5972‐1100 2X20 VFD (Dark Gray, Low Post Mount) • 5972‐1200 2x20 VFD (Light Gray, Euro Symbol) • 5972‐1300 2x20 VFD (Dark Gray, Low Post Mount) • 5972‐1400 2x20 VFD (Charcoal Gray, Low Post Mount) • 5972‐2400 2
Summary of the content on the page No. 12
1-2 Chapter 1: Introduction • Power Supply • Mounting Options Table Mount, Light Gray, 16‐in. Post Table Mount , Light Gray, 8‐in. Post Table Mount, Light Gray, No Post • Remote Mount, 8‐in. Post, Light Gray • Remote Mount, 8‐in. Post, Dark Gray • Integrated Mount , Telescoping Post, Charcoal Gray for 7458 • Integrated Mount, Telescoping Post, Light Gray for 5964 • Integrated Mount, Telescoping Post, Light Gray • No Mount Software • VFD control of 7x9 pixel characters •
Summary of the content on the page No. 13
Chapter 1: Introduction 1-3 LCD Models Hardware • Cables • Power Supply • Mounting Options Table Mount, Light Gray, 16‐in. Post Table Mount, Light Gray, 8‐in. Post Table Mount, Light Gray, No Post • Remote Mount, 8‐in. Post, Light Gray • Integrated Mount, Telescoping Post, Light Gray for 5964 • Integrated Mount, Telescoping Post, Light Gray • No Mount Software • Powered RS‐232 I/F • Diagnostics • 1 Character set in base unit • Code Page 858 (International)
Summary of the content on the page No. 14
1-4 Chapter 1: Introduction
Summary of the content on the page No. 15
Chapter 2: Site Preparation This chapter describes the installation process including site considerations, operating conditions, mounting options, and connections. Physical Environment The working range, storage, and transit environments are presented in the following tables. Working Range Condition Range Temperature 10°C to 40°C (50°F to 104°F) Temperature Change 10°C (18°F) / Hour Humidity Range 20% to 80% (No Condensation) Humidity Change 10% / hour Barometric Pressure 105,000
Summary of the content on the page No. 16
2-2 Chapter 2: Site Preparation Storage Environment For periods up to three months: Condition Range Temperature ‐10°C to 50°C (14°F to 120°F Humidity 10% to 90% RH Barometric Pressure 105,000 to 70,000 Pa Transit Environment For periods up to one week: Condition Range Temperature ‐40° to 60°C (‐40°F to 140°F) Humidity 5% to 95% RH Barometric Pressure 105,000 to 70,000 Pa
Summary of the content on the page No. 17
Chapter 2: Site Preparation 2-3 Dimensions VFD Models Desktop Mount 262 mm 30 mm (10.3 in.) (1.2 in.) 119 mm (4.7 in.) 162 mm (6.4 in.) 173 mm 178 mm (6.8 in.) (7.0 in.) 17241
Summary of the content on the page No. 18
2-4 Chapter 2: Site Preparation 16-Inch Post 30 mm 262 mm (1.2 in.) (10.3 in.) 119 mm (4.7 in.) 561 mm (22.1 in.) 95 mm 95 mm (3.75 in.) (3.75 in.) 15708
Summary of the content on the page No. 19
Chapter 2: Site Preparation 2-5 8-Inch Post 262 mm 30 mm (10.3 in.) (1.2 in.) 356 mm 119 mm 356 mm (14.1 in.) (4.7 in.) (14.1 in.) 95 mm 95 mm (3.75 in.) (3.75 in.) 20131a
Summary of the content on the page No. 20
2-6 Chapter 2: Site Preparation LCD Models Desktop Mount 178 mm 30 mm (7.0 in.) (1.2 in.) 68 mm (2.6 in.) 139 mm (5.5 in.) 178 mm 173 mm (7.0 in.) 15412 (6.8 in.)
