Summary of the content on the page No. 1
Wireless Inspection Camera
with Color LCD Monitor
Model No.: WIC-2409C
The Whistler Group Corporate Headquarters Customer Return Center
3604 NW Frontage Rd. • Bentonville, AR 72712 551 N. 13th St. • Rogers, AR 72756
Tel 479.273.6012 • Fax 479.273.2927 Customer Service Tel 800.531.0004
www.whistlergroup.com
Version No.: 1.0
Please read this User Manual carefully before using the product!
Summary of the content on the page No. 2
WELCOME 1 PACKING LIST 2 COMPONENT / CONTROLS 3 INSTALLATION 4-6 MONITOR POWER CONNECTION 6 GENERAL SAFETY INFORMATION 7 OPERATION 7-8 SPECIFICATIONS 9 CAUTION 10 WARRANTY 11 ACCESSORIES 12 FCC INFORMATION Back Cover
Summary of the content on the page No. 3
Thank you for choosing our wireless inspection camera. Please read the user manual carefully before using this product. This product is designed as a remote inspection device. It can be used to look into tight spots and wirelessly transmit real-time video to the monitor. Typical applications include HVAC, automotive inspection, cable routing, etc. If you have questions concerning the operation of this Whistler product, please call: Customer Service 1-800-531-0004 Monday - Friday • 8
Summary of the content on the page No. 4
9mm Camera with Handheld Grip 2.4 in. LCD Monitor 3 ft. tube Mirror Accessory Magnet Accessory Hook Accessory Clip Clip Clip Accessory Collar Adapter Cable Power Adapter - 2 -
Summary of the content on the page No. 5
COMPONENTS / CONTROLS - 3 -
Summary of the content on the page No. 6
3. Reinstall battery compartment, cover, and screw. Finger tighten the knurled knob - 4 -
Summary of the content on the page No. 7
The three included accessories (mirror, hook, and magnet) all attach to the camera (image head) in the same manner. Slide the accessory through the plastic holder, aligning it with the notch in holder. Engage the “hook” on the accessory end with hole in the camera head. Slide the plastic holder onto the camera head until it clicks to lock. Accessory Notch Hole Image head Plastic Holder Slide Plastic Holder onto image head Accessory Installed Align monitor slot with connector on grip and sli
Summary of the content on the page No. 8
Plug the adapter cable into the power socket on the monitor, plug the other end of the adapter cable into the end of the power adapter. Plug the power adapter into a 110v AC outlet. The built-in Li-battery will charge after the adapter is plugged in. The red indicator light will illuminate during charging and will turn off after charging is complete. The monitor can be used while charging. - 6 -
Summary of the content on the page No. 9
Do not immerse the grip and monitor in water. Store in a dry place. Such measures reduce the risk of electric shock and damage. The imager head and cable are water resistant when the unit is fully assembled, but the grip and monitor are not. Rotate the ON/OFF switch to turn on the camera. The power indicator on top of the grip will illuminate. The intensity of the LEDs that surround the camera on the imager head can be adjusted by rotating the switch. - 7 -
Summary of the content on the page No. 10
Slide the ON/OFF switch to the ON position. The power indicator will illuminate green and a picture will appear on the monitor when the handheld unit is turned on. Adjust the brightness, contrast, and orientation. Adjust the camera LED intensity for a better image. The switch acts as a dimmer. Gently guide the tube into the desired location. Slight adjustments can be made while maneuvering the head in a forward direction. The flexible tube can be bent to accommodate exploration in a variety
Summary of the content on the page No. 11
640 x 480 (NTSC) 8V-36VDC 490mA - 9-
Summary of the content on the page No. 12
• Do not expose the monitor or grip to dripping or splashing liquids. • Turn off the camera and monitor when not is use. • Use only the AC adaptor and cable supplied with the unit. • Remove the batteries when cleaning the unit. • Remove the batteries before storing the unit for a long time. • When necessary, REPLACE ALL FOUR BATTERIES in this unit with new ones. • Use only the size and type of battery specified. • Be sure to install the batteries with the correct polarity as indicated on the ba
Summary of the content on the page No. 13
WARRANTY INFORMATION Consumer Warranty This Whistler Inspection Camera is warranted to the original purchaser for a period of one year from the date of original purchase against all defects in materials and workmanship. This limited warranty is void if the unit is abused, modified, installed improperly, or if the housing and/or serial numbers have been removed. There are no express warranties covering this product other than those set forth in this warranty. All express or implied warranties for
Summary of the content on the page No. 14
ACCESSORIES Call 1-800-531-0004 or visit www.whistlergroup.com for available accessories. ORDER# DESCRIPTION PRICE WIC-100P Accessory Pack $99.95 includes hard case, 3 ft. extension shaft, and magnetic swivel mount - 1 2 -
Summary of the content on the page No. 15
FCC ID: TW5GB8802-GB8803 Note: Changes or modifications not expressly approved by Whistler could void the user’s authority to operate the equipment.
