Summary of the content on the page No. 1
IP8352 IP8352
Supreme Night Visibility • 1.3MP • 60fps
Summary of the content on the page No. 2
VIVOTEK Table of Contents Overview4 Read Before Use �������������������������������������������������������������������������������������������������������������������������������������5 Package Contents ������������������������������������������������������
Summary of the content on the page No. 3
VIVOTEK Day/Night Settings ����������������������������������������������������������������������������������������������������������������������������������������������� 70 Preference ���������������������������������������������������������������������������������������������������������������������������������������������������������� 71 Exposure ��������������������������������������������������������������������������������������������������������������������������������������������
Summary of the content on the page No. 4
VIVOTEK Overview VIVOTEK IP8352 is a best-in-class 1� 3-Megapixel bullet network camera designed for diverse outdoor applications � Incorporated with a progressive scan CMOS sensor with exceptional low lux capabilities, the IP8352 captures not only razor-sharp images of fast-moving objects during the daytime, but also offers unparalleled night visibility under low light conditions� Equipped with VIVOTEK’s self-developed next-generation SoC, the IP8352 supports high- performance H� 264/MPEG-
Summary of the content on the page No. 5
VIVOTEK Read Before Use The use of surveillance devices may be prohibited by law in your country� The Network Camera is not only a high-performance web-ready camera but can also be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use� It is important to first verify that all contents received are complete according to the Package Contents listed below� Take note of the
Summary of the content on the page No. 6
VIVOTEK Physical Description Light Sensor Lens IR LEDs Focus Controller Reset Button Zoom Controller General I/O Terminal Block SD/SDHC Card Slot General I/O Terminal Block + AC 24V + When inserting an SD/SDHC - AC 24V - card, note the orientation of the contacts� Gb Ethernet RJ45 Plug Power Cord Socket 6 - User's Manual
Summary of the content on the page No. 7
VIVOTEK Hardware Installation 1� Attach the alignment sticker to the wall� Drill three holes into the wall� Then hammer the supplied plastic anchors into the holes and secure the plate with supplied screws� 2� Feed the cables through the front opening of the wall mount bracket� (If you want to use external devices such as sensors and alarms, please refer to the assembling steps on the next page�) 3� Hang the wall mount bracket on the plate� 4� Fix the Network Camera on the wall mount bracke
Summary of the content on the page No. 8
VIVOTEK Waterproof Connector Components of the Waterproof Connector IO Block Pin Definitions Rubber (A) 1 Power +12V Screw Nut (B) 2 Digital Output 3 Digital Input 1 2 3 4 5 6 7 8 9 10 Seal (C) 4 Ground 5 RS485 + Seals (D) 6 RS485 - Housing (E) 7 Ground Sealing Nut (F) 8 Audio Input 9 Ground 10 Audio Output Assembling Steps 1� Disassemble the components of the waterproof connector into part (A) ~ (F) as shown above� 2� Remove the rubber stopper from the bottom of the Network Camera and secure
Summary of the content on the page No. 9
VIVOTEK DI/DO Diagram Please refer to the following illustration for the connection method� 12V PIN 1 Power+12V PIN 2 Digital output +12V PIN 3 Digital input PIN 4 Ground Hardware Reset Reset Button The reset button is used to reset the system or restore the factory default settings� Sometimes resetting the system can return the camera to normal operation If � the system problems remain after reset, press the reset button longer to restore the factory settings and install again� Reset: Press
Summary of the content on the page No. 10
PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment When using a PoE-enabled switch The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable� Follow the below illustration to connect the Network Camera to a PoE-enabled switch via Ethernet cable� RJ45 Female/ Female Coupler PoE Switch When using a non-PoE switch Use a PoE power injector (optional) to connect between the Net
Summary of the content on the page No. 11
PARTITION REC LINEIKVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment Setting up the Network Camera over the Internet There are several ways to set up the Network Camera over the Internet� The first way is to set up the Network Camera behind a router� The second way is to utilize a static IP� The third way is to use PPPoE� Internet connection via a router Before enabling the access to the Network Camera over the Internet, make sure you have a router and follow the steps below� 1� Conn
Summary of the content on the page No. 12
VIVOTEK Internet connection with static IP Choose this connection type if you are required to use a static IP for the Network Camera� Please refer to LAN configuration on page 51 for details. Internet connection via PPPoE (Point-to-Point over Ethernet) Choose this connection type if you are connected to the Internet via a DSL Line� Please refer to PPPoE on page 49 for details� 12 - User's Manual
Summary of the content on the page No. 13
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN� IW 1� Install IW2 under the Software Utility directory from the software CD� 2 Double click the IW2 shortcut on your desktop to launch the program� Installation Wizard 2 2� The program will conduct an analysis of your network environment� After your network environment is analyzed, please click Next to continue the program� 3� T
Summary of the content on the page No. 14
VIVOTEK Ready to Use 1� A browser session with the Network Camera should prompt as shown below� 2� You should be able to see live video from your camera� You may also install the 32-channel recording software from the software CD in a deployment consisting of multiple cameras� For its installation details, please refer to its related documents� 3� Unscrew the zoom controller to adjust the zoom factor� Upon completion, tighten the zoom controller� 4� Unscrew the focus controller to adjust t
Summary of the content on the page No. 15
VIVOTEK 5� Tighten the lens cover� 6� Replace the moisture absorber with a new one if you open the back cover during the installation procedure� 6 IMPORTANT! 5 Please tear down the aluminum foil vacuum bag and take out the moisture absorber, and then replace it with the absorber in kit using a double-sided tape� NOTE: If you want to use the supplied sun shield for outdoor environments, please follow the steps below to install: 1� Tighten the supplied two screws� 2� Attach the supplied
Summary of the content on the page No. 16
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using Web Browsers Use Installation Wizard 2 (IW2) to access the Network Cameras on the LAN� If your network environment is not a LAN, follow these steps to access the Netwotk Camera: ® 1� Launch your web browser (ex� Microsoft Internet Explorer or Mozilla Firefox)� 2. Enter the IP address of the Netwo
Summary of the content on the page No. 17
VIVOTEK NOTE: 1� By default, your Network Camera is not password-protected� To prevent unauthorized access, it is highly recommended to configure a password for your camera later. For more information about how to enable password protection, please refer to Security on page 40� 2� If you see a dialogue box indicating that your security settings prohibit running ActiveX Controls®, please enable ActiveX Controls for your browser� ® To enable the ActiveX Controls for your browser: 1� Choo
Summary of the content on the page No. 18
VIVOTEK Using RTSP Players To view the H� 264/MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming� Quick Time Player Real Player 1� Launch the RTSP player� 2� Choose File > Open URL� A URL dialog box will prompt� 3� The address format is rtsp://:/ As most ISPs and players only allow RTSP streaming through port number 554, please set the
Summary of the content on the page No. 19
VIVOTEK Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet� For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 11� To utilize this feature, please check the following settings on your Network Camera: 1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
Summary of the content on the page No. 20
VIVOTEK Using VIVOTEK Recording Software The product software CD also contains recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras� Please install the recording software; then launch the program to add the Network Camera to the Channel list� For detailed information about how to use the recording software, please refer to the user’s manual of the software or download it from http://www�vivotek�com� 20 - User's Manual
