Summary of the content on the page No. 1
Summary of the content on the page No. 2
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 192 detecting areas can be set, and 16 levels sensitivity Catalogue Motion Detection adjustable Four channels alarm（On/off value） input Alarm input independently Camera Specification…………………………………………………e1 Alarm input solutions Open/ close circuit optional Alarm Important Safeguards……………………………………………………e3 One channel linkage alarm output，one channel power Chapter 1 Survey of Products……………………………………………e4 troubles alarm output，one cha
Summary of the content on the page No. 3
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Main specifications for the system Camera Specification Tube 17'' 4:3 TFT/LCD Video Input Four Channels Independent Input 1.0Vp-p, 75Ω BNC ，1.0Vp-p, 75 BNC, Two Channels PAL/NTSC output Ω Camera Features Video Output Multiple Video Signal One Channel VGA display interface output 1/3" Color CCD Video Video Display Any Single picture, built-in quad display PAL system 25 frames/second CCIR625 lines 50 fields Resolution 420 TV Lines
Summary of the content on the page No. 4
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL HDD Status HDD Status Capacity Free_Space 1 Video Record 160G 128,125MB CAUTION 2 Sleep 040G 039,000MB RISK OF ELECTRIC SHOCK 3 None 000G 000,000MB DO NOT OPEN 4 None 000G 000,000MB Return CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE THE BACK. NO USER SERVICEABLE PARTS will enter into inquiry machine information interface, this interface will display current software INSIDE. REFER SERVICING TO version and MAC addre
Summary of the content on the page No. 5
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL IMPORTANT SAFEGUARDS 4.3 Video Record Status. Caution Search Menu This equipment is to be opened by ONLYa qualified serviceperson. There are no user All Record serviceable parts inside. Opening this equipment may expose to dangerous voltage and other risks. Incorrect re-assembly of this equipment may result in electric shock. Log Record Status 1. Read lnstructions: All the safety and operating instructions should be read before
Summary of the content on the page No. 6
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 4.2 Log Chapter1 Survey of Products Moving cursor to [LOG] item, and pressing [ENTER] key will enter into inquiry log interface 1.1 Products Survey The equipment isa kind of small channels digital monitoring products which is specially designed for Input date and type of the log security industry. It adopts the embedded processor and operating system and also integrates the Type: All Event most advanced technologies in IT field,
Summary of the content on the page No. 7
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 4.1 All Record l Manual Recording, time recording, alarm recording, motion detection recording saves the hard disc space ensuring effective usage of the hard drive space for longer periods of time. Moving cursor to [All Record] item, and pressing [ENTER] key will enter into All Record interface: Mode: moving cursor upon this selection item, and pressing [ENTER] key can select different video l Motion detection recording function
Summary of the content on the page No. 8
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL CBR: Denotes fixed code flow's coding format, this coding format shows, image quality is Chapter 2 System Installation invariable, but image quality can change according to moving object's scale inside, the larger the moving object occupied in image's scale, the worse the image quality Message Sound Switch: When setting is turn on, hard disk error and password input error, 2.1 Hard Drive Installation machine buzzer will sound. N
Summary of the content on the page No. 9
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 3.3.6 Net Parameter Chapter3 System Operating Manual Move the cursor to the net parameter and press enter to get into the system's net interface setting. See picture below: 3.1 Instructions for front panel and remote control unit 3.1.1 Front Panel a). IP address: Press enter or manually type numbers on the IP address line. b). Sub-net Mask: Moving cursor upon this selection item and pressing [ENTER] key or input POWER H.D. ALA R
Summary of the content on the page No. 10
L LC CD D W WI IT TH H B BU UI ILT LT- -I IN N D DV VRR U US SE ER R M MA AN NU UAL AL L LC CD D W WI IT TH H B BU UI ILT LT- -I IN N DV DVRR U US SE ER R M MA AN NU UAL AL 3.1.2 Remote Control Unit 3.3.5 Housing setting Moving cursor upon [Pan/Tilt setting] and pressing [ENTER] key can enter into quad channel LO GIN/LOCK POWER ON Pan/Tilt port setting interface PLAYBACK 1 1 2 2 3 3 QUAD 4 4 5 5 6 6 A. Channel: Denotes system's channel number. PA RAMETER 7 7 8 8 9 9 ANALOG + + 0 0 B. Protocol: D
Summary of the content on the page No. 11
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL e).Delay the alarm output: Under the alarm recording mode, the system is communicating the Other function buttons ⑤ alarm output signal with the alarm output end point automatically after moving the testing 【POWER/ON】Button：for turning on and off the machine（Standby and start）； signal has received the alarm signal from the I/O. Delay the alarm output means delaying the 【LOG IN/LOCK】Button：get the operating rights, to type in the
Summary of the content on the page No. 12
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 3.3.2 CHANNEL SETUP 3.2 System on/off Channel setup setting includes channel name, screen display, clock insert, 3.2.1 System Start When supplying power to DVR normally, the system enters into stand-by state（the indicating TV screen cover, etc light of the power－red led is on permanently）。 When press the【on/off】button in the remote control unit，the system is started，pictures Channel Setup displayed in the screen are built-in qua
Summary of the content on the page No. 13
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 3.2.3 System On and Off More the Arrow key to each sub-menu and press enter for setting. a). Time: When you have adjusted the year, month and day, the time will appeared automatically. When the system is under monitoring state, please press twice of the【on/off】button in the remote control unit if you want to turn off the system， The system will change into standby state from Move the cursor where you want to make the changes and
