Summary of the content on the page No. 1
Always there to help you
Register your product and get support at
www.philips.com/welcome
M100
Questi Question on? ?
Cont Contac act t
Wireless Home Monitor
Philip Philips s
User manual
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Contents 1 Important 2 Safety 2 Notice 2 2 Your wireless home monitor 4 What's in the box 4 Product overview 4 3 Placement 5 4 Set-up 6 Connect Monitor to Wi-Fi network 6 Use the monitor 6 5 Specifications 9 6 Troubleshooting 10 EN 1
Summary of the content on the page No. 4
• Do not place any sources of danger on the 1 Important apparatus (e.g. liquid filled objects, lighted candles). • Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. Safety • The small parts of this monitor can be swallowed by babies or small children. Caution Keep these parts out of reach of children. • To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture
Summary of the content on the page No. 5
Please inform yourself about the local separate This offer is valid up to three years after collection system for electrical and electronic product purchase to anyone in receipt of this products. information. To obtain source code, please Please act according to your local rules and contact open.source@philips.com. If you prefer do not dispose of your old products with your not to use email or if you do not receive normal household waste. Correct disposal of confirmation receipt within a we
Summary of the content on the page No. 6
2 Your wireless Product overview home monitor a Please read and understand the accompanied b safety sheet before you use this monitor. c To fully benefit from the support that Philips offers, register your product at www.philips. f com/welcome. e d What's in the box a Camera lens b Microphone c LED light d Magnetic base e DC power connector f Reset key 4 EN
Summary of the content on the page No. 7
Mount on ceiling 3 Placement If you install on a ceiling, select ‘Image Flip (Image Flip)’ in the ‘Settings ( )’ options of your monitor. You can place the Monitor on a flat surface with the magnetic base. Or you can attach it to the ceiling or wall, see the pictures below: Note • Before you place the monitor, make sure the monitor is close to a power outlet. • Before you secure the supplied dowels and screws, drill holes on a flat and hard surface. Mount on wall EN 5
Summary of the content on the page No. 8
4 Follow the on-screen App instructions. 4 Set-up 5 When prompted, input your Wi-Fi network name and your Wi-Fi password. • If you want to set-up another monitor, You can see and hear what is happening in repeat the steps of ‘3 – Set-up’. your room from anywhere in the world with a 6 In.Sight App will generate a QR code, and smartphone. hold approx. 15 cm (0.5 ft) in front of the What you need monitor lens. 1 Make sure your Wi-Fi router is turned on and that your Smartphone or Tablet is
Summary of the content on the page No. 9
Application Overview Motion alert : Monitor Connection status. Green light dot If the monitor detects a movement within a means the monitor is connected to Wi-Fi, and specified range, a 30-second video is recorded able to stream video. Red light dot means the to your Dropbox account, and you will receive monitor is not connected or has a problem an alert from your smartphone or tablet. You with connection and no video streaming have an overview of all alerts in the list. T o is possible.
Summary of the content on the page No. 10
Watch the monitor on your web browser After you have registered your account and set up the monitor via your smartphone or tablet, you can also watch it via your favorite web browser (Safari, Chrome, Internet Explorer, Firefox). Enter the following address in your web browser: www.philips.com/ insightwebview Access more options Tap to enable or disable more options like audio and movement alerts, turn on or off the monitor light, Dropbox settings, change monitor name, ‘Image Flip (Imag
Summary of the content on the page No. 11
5 Specifications Note • Specifications are subject to change without notice Output VGA, QVGA resolution Lens F2.8 Frame rate 30 fps at VGA, QVGA Focus mode 0.4m Focus range 1 m to infinity Video h.264 format Connectivity Wi-Fi Power DC 5V, 600mA; supply Model name: ASUC30z-050060 (z = a, b, c, and e) a direct plug-in power adapter with USB output terminal and a different country plug type ('a'=America, 'b'=Britain, 'c'=Australia, 'e'=Europe) Dimensions (w x h x d) 35.9 x 83.8 x 34.3mm Net
Summary of the content on the page No. 12
• Unlike legacy solutions, In.Sight does 6 Troubleshooting not require port forwarding. There is no risk from leaving ports open on the network. In.Sight uses secure peer to peer networking solution which provides a secure, encrypted connection each time Warning your camera is viewed from a remote • Risk of electric shock. Never remove the casing of the location. To learn more about secure monitor. connectivity with Philips In.Sight, visit http:// www.yoics.com. This method of networkin
Summary of the content on the page No. 13
When on a remote network (either another Wi-Fi network or on 3G), I can only watch for 5 minutes. • When on a remote network – either Wi-Fi or on 3G, you can only watch 5 minutes per session. You have unlimited sessions per day. If you want to watch longer per session, in-app upgrades are available. Go to ‘Settings ( )’ – ‘General (General)’ and select ‘In.Sight Account (In.Sight Account)’. • When you are on your local Wi-Fi network, you have unlimited viewing time. I can only share to
Summary of the content on the page No. 14
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. M100_12_UM_V2.1 All rights reserved.
