Pelco WLV500-3 user manual

Summary of the content on the page No. 1

INSTALLATION/OPERATION MANUAL
WLV500 SERIES WIRELESS VIDEO
TRANSMISSION SYSTEMS
®
1.0 SCOPE 2.2 MODELS
WLV500-1 Channel 1
The information contained within this manual covers
WLV500-2 Channel 2
the installation and operation of the PELCO WLV500
WLV500-3 Channel 3
Series wireless control link system.
WLV500-4 Channel 4
Installation should be in accordance with FCC regula-
Transmitter (WLV500TX)
tions and all applicable local and national electric codes,
Receiver (WLV500RX)
utilizing approved mat

Summary of the content on the page No. 2

RF Case Finish Transmitter Cover: Black paint Radiated Power: FCC Part 15 (15.249) Base: Alodine aluminum Transmit Antenna: Attached circular polarized patch Environmental Receive Connector: TNC Operating Temperature: -20° to 65° C Receive Input Impedance: 50 ohms Storage Temperature: -50° to 85° C Frequency Operating Range: 2400 to 2483 MHz Humidity (Non-condensing): 90% System Frequency Options: (Factory Set) WLV500KT-1 2401 MHz 4.0 INSTALLATION WLV500KT-2 2428 MHz WLV500KT-3 2455 MHz 4.1 VI

Summary of the content on the page No. 3

4. The units should become fully operational The maximum transmission range for both the WLV1000 within two minutes after DC power is con- and WLV500 will be achieved when there is a clear line nected, after which adjustments can be made. of sight between the transmitter and receiver antennas. The best reception will occur if all antennas are elevated a minimum of 8 to 10 feet above level ground. If there are moving objects between the antennas, such as traffic 4.2 ANTENNA POSITIONING AND on the

Summary of the content on the page No. 4

2. Interference 4.3 TROUBLESHOOTING The WLV500 Series transmit in the 2.4 GHz It is recommended that the wireless transmission con- band. Although this band is less crowded than trol link system be first tested with both the WLV500 the 900 MHz band, it is still susceptible to and WLV1000 transmitters and receivers in close prox- some outside interference, including mobile imity (3 to 6 feet), to ensure proper interconnection of video transmission. Most interference should the coaxitron receiver

Summary of the content on the page No. 5

5.0 WARRANTY AND RETURN INFORMATION WARRANTY RETURNS Pelco will repair or replace, without charge, any merchandise proved In order to expedite parts returned to the factory for repair or credit, please defective in material or workmanship for a period of one year after the date call the factory at (800) 289-9100 or (559) 292-1981 to obtain an of shipment. authorization number (CA number if returned for credit, and RA number if returned for repair). Exceptions to this warranty are as noted below:

Summary of the content on the page No. 6

® PELCO 3500 Pelco Way, Clovis, CA 93612-5699 (559) 292-1981 • (800) 289-9100 FAX (800) 289-9150 or (559) 292-3827 (Product specifications subject to change without notice.) C901M 6 Pelco Manual C901M - 1/94