Pelco RMQ17T user manual

Summary of the content on the page No. 1

®
Installation/Operation
RMQ14T/RMQ17T
Rack Mount Kit
C1996M (2/01)
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel +1(559) 292-1981 • FAX +1(559) 348-1120

Summary of the content on the page No. 2

IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. Only use replacement parts recommended by Pelco. 3. Use only installation methods and materials capable of supporting four times the maximum specified load. Please thoroughly familiarize yourself with the information in this manual prior to installation and op

Summary of the content on the page No. 3

RMQ17T The RMQ17T Rack Mount Kit contains the following parts: Qty Description 2 Monitor mounting brackets 2 Handles 8 Nylon finishing washers (black) 8 Screws, 10-32 x .75-inch Phillips, pan head (black) 4 Screws, 10-32 x .50-inch Phillips, pan head 4 Locking washers To rack mount the PMCS17A monitor, refer to Figure 1 and do the following: 1. Disconnect the monitor from its power supply. 2. Attach the handles to the mounting brackets. Use the four supplied 10-32 x .50-inch screws and lock- in

Summary of the content on the page No. 4

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. ® • Three years on Genex Series products (multiplexers, server, and keyboard). ® • Three years on Camclosure and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X,