Pelco PMVR2 user manual

Summary of the content on the page No. 1

QUICK START GUIDE
PMVC4/PMVR2
Multiviewer
Multiple Image Display System
C2929M (5/06)

Summary of the content on the page No. 2

B A 9 8 7 6 5 Illustrated Package Contents - OR - PARTS BOX PMVC4 MULTIVIEWER PMVR2 MULTIVIEWER 10” (25.4 cm) 6’ (1.8 m) DVI CABLE USA STANDARD EUROPEAN DB9 CABLE DB9 CABLE POWER CORD STANDARD POWER (LOOPING) (TO PC) (110 VAC) CORD (220VAC) SCREWS (8) RACK MOUNT EARS RS-232 TO RS-485 QUICK START INSTALLATION CD CONVERTER GUIDE Figure 1. Package Contents NOTE: For detailed information on the installation, configuration, and operation of the multiviewers, consult the manual on the ins

Summary of the content on the page No. 3

B B A A 9 9 8 8 7 7 6 6 5 5 CONNECTING MULTIPLE PMVC4 UNITS Remember, when cascading PMVC4s, loop from the multiviewer with a lower ID to the multiviewer with a higher ID. Also, the following additional steps are required when connecting multiple units. 1. Use a flat head screwdriver on the rotary Unit ID switch to set the ID of the first multiviewer in the display group to 0. This identifies it in the software as the first multiviewer. Change the ID of every additional multiviewer

Summary of the content on the page No. 4

B B B A A A 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 DISPLAY VMX300 PC AND CONTROL MONITOR MONITOR DX8000 VGA OR DVI OUTPUT VGA 1 VGA 2 DVI 1 DVI 2 ON OFF COM IN 4 COM OUT Cascade In VGA Out Unit ID 100-240 VAC Cascade/DVI Out PMVR2 Figure 4. Connecting a Single PMVR2 CONNECTING MULTIPLE PMVR2 UNITS Remember, when cascading PMVR2s, loop from the multiviewer with a lower ID to the multiviewer with a higher ID. Also, the following additional steps are required when connecting multiple units. 1. Use

Summary of the content on the page No. 5

B B B A A A 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 CONNECTING BOTH PMVC4 AND PMVR2 UNITS In cascading PMVC4 multiviewers with PMVR2 multiviewers, remember to loop from a multiviewer with the lower ID to a multiviewer with a higher ID. Begin with PMVC4 multiviewers and then PMVR2 multiviewers. Follow the instructions for connecting multiple units. DISPLAY MONITOR PC AND CONTROL MONITOR VGA OR DVI CAMERAS OUTPUT PMVC4 ID0 VGA Out Video 1 Video 2 Video 3 Video 4 COM IN 4 COM OUT Cascade In Cascade

Summary of the content on the page No. 6

4. The program displays the Set Total Monitor dialog box, which determines how many display groups you have. Figure 7. Set Total Monitor Dialog Box • Set the number of monitors (up to 50 monitors). You must set this first. • If you click the Auto Set check box, the program will quickly set up a single group or multiple groups. (If you do not click the Auto Set check box, the program will bypass steps 6 and 7. Skip the following instructions and go directly to Step 8.) •

Summary of the content on the page No. 7

7. The program next displays the Set Monitor Type dialog box. The settings in this dialog box are optional. They are only a graphic representation of the system and do not actually affect the system itself. Figure 9. Set Monitor Type Dialog Box • Select the group. • Use the zoom buttons to decrease or increase the image on the control screen. • Select values for ratio and size. Click the Apply All check box to apply the ratio settings to all the images. • Use the ho

Summary of the content on the page No. 8

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or workmanship for a period of one year after the date of shipment. (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information: Exceptions to this warranty are as noted below: 1. Model and serial num