Summary of the content on the page No. 1
70062
Summary of the content on the page No. 2
Table of Contents Package Contents 1 Features 2 FCC Regulation 3 Monitor Features & Controls 4 Camera Features & Controls 5 Important Safety Instructions 6 Battery Installation & Set-Up 7 Camera Operation & Installation 8 Monitor Operation & Installation 9 Troubleshooting 12 Warranty 13
Summary of the content on the page No. 3
Introduction ® Congratulations on the purchase of the MobiCam Digital Wireless Video Moni- toring System, which incorporates the latest in wireless technology. We are sure that you will be pleased with the quality and features of this product. We recom- mend that you read these instructions carefully before use. ® The MobiCam Digital Wireless Video Monitor enables you to transmit picture and sound wirelessly, which is ideal for many situations such as monitoring babies, young children, pets,
Summary of the content on the page No. 4
Features ™ • DigiLock Wireless with (FHSS) technology for private and secure, noise-free performance • No installation needed, ready to use out of the box • Compact design for easy portability • Transmission range up to 900 ft. outdoors and 450 ft. indoors Note: Actual range can vary depending on the environment. • Automatic Night Vision mode with 30 ft. range for viewing in total darkness • Extra-wide camera viewing angle lets you see more of the room • Expandable up to 3 cameras
Summary of the content on the page No. 5
FCC Regulation This equipment has been tested and found to comply with the requirements of the FCC. These requirements are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a part
Summary of the content on the page No. 6
Monitor Features & Controls Monitor Unit Front 4 1 - 2.4” Color LCD Screen 2 - Volume Control 3 - Brightness Control 4 - Power ON LED Indicator 5 - LCD and Power ON/OFF 6 - AV Output 1 7 - DC Power input 5 2 3 6 7 8 10 Monitor Unit Rear 8 - Speaker 9 - Tilt Screen Release 10 - Antenna 11 - Channel Selector/Scan Mode 11 12 - Battery Door 9 12 4
Summary of the content on the page No. 7
Camera Features & Controls 13 14 Camera Unit Front 13 - Night Light 14 - IR Night Vision LED’s 15 - Lens 16 - Microphone 15 17 - Light Sensor 18 - Power ON/OFF with LED 18 16 17 Camera Unit Bottom 19 19 - Link/Code Key 22 20 - DC Power Input 21 - Night Light Mode Switch 22 - Voice Activation (VOX) Switch 21 20 5
Summary of the content on the page No. 8
Important Safety Instructions ® Please read this instruction manual before using your MobiCam Digital Wire- less Monitor. When using electrical appliances, basic safety precautions should always be followed. Please keep this information for future reference. • Periodically examine this product for damage to the cord, housing or other parts that may result in the risk of fire, electric shock or injury. Do not operate ® any product with a damaged cord or plug. If your MobiCam Digital Syste
Summary of the content on the page No. 9
• Remove the battery from the Monitor during long periods of non-use. • Unplug the AC adaptors from the Monitor and Camera during periods of non use. To disconnect from the power supply, grip the transformer and pull from the power socket. Never pull by the cord. • Replace battery with the same equivalent type. Please dispose of old, defective batteries in an environmentally friendly manner in accordance with the rel- evant legislation. • Only use the Monitoring System with the s
Summary of the content on the page No. 10
Camera Operation & Installation Power ON/OFF To turn ON the camera unit, press the ON/OFF button located at the front of the camera (18) for about 1 second or until back lighting of the switch is turned on. CAMERA MODES: Voice Activation Mode (VOX) Voice Activation (VOX) mode allows your camera to go to sleep when there is no sound in the room. The monitor will automatically turn on when the camera detects noise– subject to the preset sound level. This feature allows you to con- serve battery
Summary of the content on the page No. 11
Monitor Operation & Installation NOTE: For best performance it is recommended to keep units at least 7-8 feet away from other wireless devices. Power ON/OFF To turn on the monitor unit, slide the LCD Power On/Off switch (5), located on the right side of the monitor, to the “ON” position. LCD Off When the LCD Power On/Off switch (5) is set to the center, LCD OFF position, the unit can be used as an audio-only monitor. This feature enables the monitor to use less power and remain operational
Summary of the content on the page No. 12
• Slide the channel selection switch (11) to select the desired Channel (A, B, C). • Press and hold the “+” brightness button marked B (3) and turn the monitor ON (5) simultaneously. • The monitor will display the word “PAIRED” • Turn off both the Camera and Monitor, then turn both units back on and the pairing process is completed. • Repeat the same process to pair a new camera. To Disconnect the Paired Camera • Turn the monitor OFF. • Select the Channel/Camera you want to de-lin
Summary of the content on the page No. 13
Brightness Control & Volume Control The brightness control of the LCD can be adjusted by pressing the Brightness Control Button (“B”) located on the front of the Monitor (3). Press the “+” to increase and “–” to decrease the brightness of the LCD. The volume control of the LCD can be adjusted by pressing the Volume Control Button (“V”) located on the front of the Monitor (2). Press the “+” to increase and “–” to decrease the volume on your monitor. 11
Summary of the content on the page No. 14
Troubleshooting PROBLEM NORMAL SOLUTIONS Screen turns on and off • The “VOX” mode is selected on the camera, when there is no noise detected by the camera it stops transmitting to save power. To turn off select “OFF” under the “VOX” settings switch. No reception at Monitor • Unit has not been switched on. • AC/DC adaptor has not been connected. • Adjust the position of the Camera or Monitor. • No Battery Power (check LED indicator) • The transmitter may not be transmitt
Summary of the content on the page No. 15
Limited Warranty Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will be applied for replacement of parts or labor for repair. To obtain warranty
Summary of the content on the page No. 16
Expand Your Monitoring Possibilities... ® The available MobiCam Digital Additional Camera (#70063, sold separately) can be added to your system (for a total of 2 or 3) so CAM-1 you can switch between them, either automatically, or at the touch of a button. CAM-3 CAM-2 And you can monitor picture and sound remotely on your computer or other Internet device from any- where in the world with the avail- ® able MobiCam Internet Kit (item # 70168, sold separately) with such features as motion-
