Summary of the content on the page No. 1
Operating Instructions
LVC-C500
LVC-C503
LVC-C510
LVC-C513
LVC-C530
LVC-C533
LVC-C553
Before installing and using the camera,
please read these instructions thorough-
ly and retain them for later reference.
Summary of the content on the page No. 2
Warning To prevent fire or shock hazard,do not expose the unit to rain or moisture. CAUTION To avoid electrical shock,do not open the cabinet. Refer servicing to quali- RISK OF ELECTRIC SHOCK fied personnel only. DO NOT OPEN Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70. CAUTION:TO REDUCE THE RISK OF Regulatory Notices For U.S.A ELECTRIC SHOCK, DO NOT REMOVE This equipment has been tested and found to comply with the limits for a COVER(OR BACK) NO USER SERVI
Summary of the content on the page No. 3
Contents and Features Contents Features Contents and Features . . . . . . . . . . . . . . . . . . . . . . . . .3 The power zoom color video camera is designed for use in Cautions for Safe Operation . . . . . . . . . . . . . . . . . . . . . .4 monitoring system. Operating Controls and Their Functions . . . . . . . . . . .5 • High resolution and high sensitivity with a 1/4 inch Power IN / CONTROL / External Key(A/D IN) . . . . .6-14 Exview/HAD/CCD (Charge Coupled Device) MENU DESCRIPTIONS . . . .
Summary of the content on the page No. 4
Cautions for Safe Operation Power Supply • Close to generators of powerful electromagnetic This camera must always be operated a 12V DC radiation such as radio or TV transmitters. power supply. Care of the unit Handling of the unit • Remove dust or dirt on the surface of the lens Be careful not to spill water or other liquids on the with a blower. unit, or to get combustible or metallic material • Use a dry soft cloth to clean the body. If it is very inside the body. If used with foreign matter
Summary of the content on the page No. 5
Operating Controls and Their Functions 1. Tripod adapter Model: LVC-C500, LVC-C503, This adapter can also be attached on the bottom of the camera. LVC-C510, LVC-C513 2. Lens mount cap 3. TELE Key 1 When push the TELE KEY, picture is telephoto 2 4. WIDE Key When push the WIDE KEY, picture is wide angle 5. Focus Near Key In a manual situation, focus get near. 6. Focus Far Key In a manual situation, focus get far. 7. Menu Key If you want to set up a diverse function, you can push this button. 8. Vi
Summary of the content on the page No. 6
Power In / Control Model: LVC-C500, LVC-C503, LVC-C510, LVC-C513 You can adjust focus and zoom by a pin terminal on the back side of the camera. 1 6 2 5 3 4 is the color of the cable. (If it is offered) * Adjust voltage from 1 pin and 2 pin 6
Summary of the content on the page No. 7
External Key (A/D IN) Model: LVC-C500, LVC-C503, LVC-C510, LVC-C513 Schematic diagram of wired remote-control 7
Summary of the content on the page No. 8
Operating Controls and Their Functions 1. Tripod adapter Model: LVC-C530, LVC-C533 This adapter can also be attached on the bottom of the camera. 2. Lens mount cap 1 3. TELE Key When push the TELE KEY, picture is telephoto 2 4. WIDE Key When push the WIDE KEY, picture is wide angle 5. Focus Near Key In a manual situation, focus get near. 6. Focus Far Key In a manual situation, focus get far. 7. Menu Key If you want to set up a diverse function, you can push this button. 8. Video output (S-Video
Summary of the content on the page No. 9
Power In / Control Model: LVC-C530, LVC-C533 You can adjust focus and zoom by a pin terminal on the back side of the camera. is the color of the cable.(If it is offered) * 9
Summary of the content on the page No. 10
Power In / Control Model: LVC-C530, LVC-C533 10
Summary of the content on the page No. 11
External Key (A/D IN) Schematic diagram of wired Model: LVC-C530, LVC-C533 remote-control 11
Summary of the content on the page No. 12
Operating Controls and Their Functions 1. Tripod adapter Model: LVC-C553 This adapter can also be attached on the bottom of the camera. 2. Lens mount cap 3. TELE Key 1 When push the TELE KEY, picture is telephoto 2 4. WIDE Key When push the WIDE KEY, picture is wide angle 5. Menu Key If you want to set up a diverse function, you can push this button. 6. Control JACK (RJ45) Connect RS-422 interface 7. Focus Far Key In a manual situation, focus get far. 8. Focus Near Key In a manual situation, foc
Summary of the content on the page No. 13
Connections Model: LVC-C553 Power Connection 1. Remove the insulation on the power cable as illustrated. 12 3 2. Attach the terminal tips. 3. Connect to the 12V DC UL Listed, Class 2 Power Supply only on the camera. 1 2 Connection the monitor 1. To VIDEO OUT 2. To Video input on the monitor 13
Summary of the content on the page No. 14
Control Remote Control Lines are connected to RJ-45 socket as Model: LVC-C553 shown below. In case of RS-485 INTERFACE (Basic) T+ T- 7T- R- CONTROL 8T+ R+ CONTROL OUT Controller In case of Zoom/Focus DC control Interface(option) 4 ZOOM ZOOM(+Tele, -Wide) 5 COMMON COM PIN 8 PIN 1 6 FOCUS FOCUS(+Near, -Far) Receiver/Controller Voltage Range + Vcom + (+5~15V) - Vcom - (+5~15V) 14
Summary of the content on the page No. 15
MENU DESCRIPTIONS Using TELE, WIDE, F. NEAR, F. FAR button • TELE and WIDE are used for UP and DOWN. • FOCUS+ and FOCUS- are used for INCREASE and DECREASE the data. 15
Summary of the content on the page No. 16
CAMERA ID 1. CAMERA ID To connect a large number of camera , It can be assigned to identification number to each camera for camera control easily. (OFF, 0 - 255: total numbers of ID are 256) • It only can be set this function using ID commend. To transfer ID Code of camera , In first byte at PC control. Set the ID number of camera , and then the ID number display continuously. 16
Summary of the content on the page No. 17
FOCUS MODE SET 2. Focus Set: 2-1. Focus Mode Set This function is for focus mode setting A) Set up “FOCUS SET” in main menu using Tele/Wide key. Select the “FOCUS MODE” in submenu using Tele/Wide key. And then set the mode (Auto, Push auto, or Manual) using Focus key. 2-2. Focus Distance Set This function is for selection of minimum shooting distance. A) Select the “FOCUS DIST” in submenu using Tele/Wide key. B) Set the focus distance mode from 1cm to 5M. (1cm, 10cm, 50cm, 1M, 3M, 5M) using
Summary of the content on the page No. 18
FOCUS MODE SET 2-4. ZOOM END Set This function is for selection of zoom end position. A) Select the “ZOOM END” in submenu using Tele/Wide key. B) Set the Zoom end mode using Focus key. LVC-C503/C513/C533/C553: from (Zoom Start + 1) to X54 LVC-C500/C510: from (Zoom Start + 1) to X324 2-5. ZOOM SPEED Set This function is for selection of zoom speed. A) Select the “ZOOM SPEED” in submenu using Tele/Wide key. B) Set the Zoom speed, Slow, Middle , Quick using Focus key. 2-6. ZOOM TRACKING MODE Set Th
Summary of the content on the page No. 19
FOCUS MODE SET 2-7. INITIAL SET If initial mode set to ON, All FOCUS SET function is changed to the factory setting. A) Select the “INITIAL SET” in submenu using Tele/Wide key. B) Set the initial set mode to ON or OFF using Focus key. 2-8. RETURN TO MAIN MENU This function is exit to main menu. A) Select the “RETURN” in submenu using Tele/Wide key. B) Set the return mode using Focus key. 19
Summary of the content on the page No. 20
AWB SET (Auto White Balance) 3. AWB SET 3-1. WB Mode Set AWB This function is for changing the WB mode. WBC MODE AUTO A) Set up “AWB SET” in main menu using Tele/Wide key. RED ADJUST NOT USE B) Select the “WB MODE” in submenu using Tele/Wide key. BLUE ADJUST NOT USE C) Set the mode Auto, Push auto , Manual, Outdoor, Indoor using INITIAL SET ON RETURN Focus key. *WBC MODE: Use for changing White Balance Mode . 1) AUTO: WB Range 2500°K ~ 9500°K . 2) PUSH AUTO: Set the AWB mode to Push Auto, then W
