Summary of the content on the page No. 1
Multi-Media Unit
Installation Instructions
K9696V2 – 12/04 – Rev. B
Summary of the content on the page No. 2
Summary of the content on the page No. 3
ISSUE DATE REVISIONS REV. A July 2004 Honeywell template. REV. B December 2004 Formatting: pagination, minor edits.
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Declaration of Conformity party lines is subject to state tariffs. This equipment is hearing aid compatible. A Rapid Eye Multi-Media LT unit (HRMxxxyyzzzz) Ringer Equivalence Number complies with Council Directives 89/336/EEC and 73/23/EEC. A Ringer Equivalence Number (REN) assigned These Euro Norms have been applied: to each terminal device provides an indication of • EN50022: 1998, Radio frequency (RF) the maximum number of terminals allowed to be emissions; connected to a telep
Summary of the content on the page No. 6
Summary of the content on the page No. 7
Table of Contents 1 Walk-through ................................................................................ 1–1 1.1 Overview ...................................................................................................................................... 1–1 1.2 Walking Through.......................................................................................................................... 1–2 1.3 Where To, Next? ...........................................................
Summary of the content on the page No. 8
Multi-Media Unit: Installation Instructions 6 Frequent Questions...................................................................... 6–1 6.1 Supporting an Installation............................................................................................................ 6–1 6.2 Background.................................................................................................................................. 6–2 7 Find-it........................................................
Summary of the content on the page No. 9
Summary of the content on the page No. 10
Summary of the content on the page No. 11
1 Walk-through 1.1 Overview New to Multi-Media? Installers who are new to Multi can benefit most from section 1.2: a walk-through of the key steps of a Rapid Eye Multi-Media unit installation. Not new to Multi-Media? Experienced installers can skip to sections: • 2: Field Work, shows procedures and reference material for Multi-Media unit installation. • 5: Other Site Hardware, shows optional hardware that you can add to a Rapid Eye site. Software The software operations for runni
Summary of the content on the page No. 12
Multi-Media Unit: Installation Instructions 1.2 Walking Through Steps 1.2.1 to 1.2.10 offer a walk-through of a Multi installation. Procedures follow in section 2: Field Work, p. 2–1. 1.2.1 Cameras !1 Connect cameras (as many as 16) to the Multi-Media unit Fig. 1. Use the first available “IN” on the Multi back-panel for a camera. For more detail • 2.5: Connecting a Camera, p. 2–6 1.2.2 Communications !2 Connect the Multi-Media unit to a network or telephone line Fig. 2. Use stand
Summary of the content on the page No. 13
Walk-through 1.2.3 Other Hardware Ports for future use The USB ports, Printer port, VGA2 port, the MIC IN connector and the eight, numbered RS-232 ports are for future use. Please do not connect USB devices or a printer to a Multi-Media unit. For more detail • section 5: Other Site Hardware. p. 5–1 1.2.4 Powering-up the Multi-Media unit !3 Supplying power to the unit and the cameras Fig. 3. Consider also plugging in cameras into the uninterruptible power supply used for a unit. I
Summary of the content on the page No. 14
Multi-Media Unit: Installation Instructions 1.2.6 A Database for Multi !5 Start Admin to create a Multi database Fig. 5. Shortcut for Admin, on the Windows desktop !6 Log on to a Multi database, or create one using Admin Fig. 6. The window for logging on can also be used to obtain an empty Multi central database. 1.2.7 Site Name !7 Using Admin, add a site Fig. 7. From the Admin “Sites” tab, you can add, name, update and delete a site. 1–4
Summary of the content on the page No. 15
Walk-through 1.2.8 Type of Connection !8 Add information about the connection, and save it Fig. 8. Select a network or dial-up connection. About connections • 2.6: LocalView, p. 2–7 • 2.7: Network Connection, p. 2–9 • 2.8: Dial-up Connection, p. 2–15 1.2.9 Running View !9 To use View • After installing View on your PC along with Admin, from your PC’s desktop click the View shortcut icon, then log on. Fig. 9. Shortcut for View, on the Windows desktop 1–5
Summary of the content on the page No. 16
Multi-Media Unit: Installation Instructions !10 Log on to View Fig. 10. Use the same database created earlier, using Admin; see fig. 6 on page 1–4. 1.2.10 Testing a Connection !11 Test the connection; use View to run a Maintenance session Fig. 11. A connection works if you see “System operational” in the Feedback box. 1–6
Summary of the content on the page No. 17
Walk-through !12 Start a Live session Fig. 12. Select a site on the Sites tab, then click Live. 1.3 Where To, Next? In these installation instructions Detailed procedures and reference material, for each step of the walk-through, start on p. 2–1. 1.3.1 For More Information... Other Multi guides Admin User Guide. Multi Admin software is used to enter data for connections to Multi- Media units, accounts for View operators and so on. Maintenance functions are explained, including sec
Summary of the content on the page No. 18
Multi-Media Unit: Installation Instructions Background information CCTV. For in-depth reference work about the field of closed-circuit television in a security setting, see: • Kruegle, Herman, CCTV Surveillance: Video practices and technology, Butterworth–Heinemann, Newton (MA), 1995, ISBN 0-7506-9028-3, TK6680.K78. Effective video feeds are a major component of any CCTV system. Planning for camera position, distance from subject, angle and lighting can be as critical as operating yo
Summary of the content on the page No. 19
2 Field Work Audience Field technicians, tasked with the initial steps of an installation (see sections 1.2.1 and 1.2.2), will find the steps expanded and explained in more detail, in this section. !13 Road map to field work • Unpack the unit. • As you start connecting hardware to the Multi-Media unit, use the Site Information Checklist on p. 7–8, to take notes. • Connect one or more cameras to the unit. • According to the communications that you plan to use, connect the unit to: a
Summary of the content on the page No. 20
Multi-Media Unit: Installation Instructions Table 1 contents of Rapid Eye’s hardware kit, WAMULTI5HWP4 item, one of each, unless otherwise noted Part # power cord P8137 rack ears, brackets and screws, for optional mounting of unit SARE2EARS network cable (CAT-5), RJ45 connectors, 2m length K9530 null-modem cable, serial, DB9 connectors, female 921400–05 straight through cable, DB9-pin, male connector, to K0304 DB9-pin, female connector terminal block plug for FAULT RELAY, 4 positions,
