Summary of the content on the page No. 1
VISTA-128BP/VISTA-250BP/
VISTA-128BP/VISTA-250BP/
VISTA-128SIA
VISTA-128SIA
Enhanced
Enhanced
C Co om mm me er rc ciia all B Bu ur rg glla ar ry y
Partitioned Security System
Partitioned Security System
With Scheduling
With Scheduling
User Guide
User Guide
K5895V5 4/09 Rev C
Summary of the content on the page No. 2
Your Honeywell security system is designed for use with devices manufactured or approved by Honeywell for use with your security system. Your Honeywell security system is not designed for use with any device that may be attached to your security system's keypad or other communicating bus if Honeywell has not approved such device for use with your security system. Use of any such unauthorized device may cause damage or compromise the performance of your security system and affect the v
Summary of the content on the page No. 3
TABLE OF CONTENTS SYSTEM OVERVIEW ....................................5 Common Lobby Operation .......................25 General .......................................................5 How User Codes Affect the Common A Partitioned System ..................................6 Lobby ........................................................26 Panel Linking ..............................................6 ACCESSING OTHER PANELS ...................27 Zones..........................................
Summary of the content on the page No. 4
Arming ......................................................43 To Display The Event Log........................60 Disarming .................................................43 SETTING THE TIME AND DATE ................61 CHIME MODE..............................................44 TESTING THE SYSTEM (TO BE CONDUCTED WEEKLY) .........................62 Using the 9 Key ...................................44 Using the 5 TEST Key.........................62 VIEWING ALARM COMPANY MESSAGES .
Summary of the content on the page No. 5
System Overview General Your Honeywell security system consists of a main control panel, at least one keypad, and various sensors strategically positioned throughout the premises. The system offers you three forms of protection: burglary, fire and emergency. The keypad provides full control of system operation. The system uses microcomputer technology to monitor all protection zones and system status and provides appropriate information for display on the keypad(s) used with the system
Summary of the content on the page No. 6
System Overview (cont’d) A Partitioned System Simply stated, a partitioned system shares one physical alarm system among different users, each with their own requirements. For the most part, you as a user need not know about other users and their structure in the system, but from time to time, you may see display messages that indicate the system is in use by another user. Do not be concerned, this is normal. Refer to the ACCESSING OTHER PARTITIONS section for additional information. P
Summary of the content on the page No. 7
System Overview (cont’d) Burglary Protection The burglary protection portion of your system must be turned on or "armed" before it will sense burglary alarm conditions. Your system provides four modes of burglary protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to BYPASS selected zones of protection while leaving the rest of the system armed. The system also provides a CHIME mode, for alerting users to the opening and closing of doors and windows while the system is dis
Summary of the content on the page No. 8
System Overview (cont’d) Memory of Alarm When an alarm condition occurs, the keypad displays the number(s) of the zone(s) that caused the problem, and displays the type of alarm (ex. FIRE, ALARM). It remains displayed until it is cleared by disarming the system (see DISARMING THE SYSTEM section). Speed Key (Macros) The system can store a string of up to 32 keystrokes, which can be activated anytime by simply pressing the “A, B, C, or D” keys. This feature can be used to make it easy t
Summary of the content on the page No. 9
System Overview (cont’d) partition, or until 2 minutes has elapsed with no keypad activity. Entering your security code, pressing [✳] followed by [0] will return the keypad to its original partition. Master Keypad Operation A "Master" keypad is one on which the status of all eight partitions is displayed simultaneously. A user can get more information about a certain partition by simply entering [✳] + the desired partition number (1-8). To log on to the "Master" partition (9) using t
Summary of the content on the page No. 10
About The Keypads General IMPORTANT: If the keypad beeps rapidly upon entering the premises, it indicates that an alarm has occurred during your absence. LEAVE IMMEDIATELY and CONTACT THE POLICE from a safe location nearby. Your keypads allow you to control all system functions. The keypads feature a telephone style (digital) keypad and a Liquid Crystal Display (LCD) that shows the nature and location of all occurrences. Keypad display back lighting is programmable to always stay on o
Summary of the content on the page No. 11
Functions of the Keypad LCD DISPLAY SPEAKER ARMED A 1 OFF 2 AWAY 3 STAY LEDS READY MAX TEST BYPASS B 4 5 6 C 7 INSTANT 8 CODE 9 CHIME READY 0 # D FUNCTION KEYS IMPORTANT! When using the keypad to enter codes and commands, sequential key depressions must be made within 3 seconds of one another. If 3 seconds elapses without a key depression, the entry is aborted and must be repeated from its beginning. – 11 – 6160-00-002-V1
Summary of the content on the page No. 12
Functions of the Keypad (cont’d) ALPHA DISPLAY WINDOW: A 2-line, 4 MAXIMUM : Arms in manner similar 32-character Liquid Crystal Display (LCD) to AWAY mode, but eliminates the entry that displays protection point delay period, thus providing maximum identification and system status, messages, protection. An alarm will occur and user instructions. immediately upon opening any protection 1 OFF : Disarms the burglary portion of point, including entry delay zones. the system, sile
Summary of the content on the page No. 13
Functions of the Keypad (cont’d) KEYS 0-9: Used to enter your individual 9 CHIME : Turns on & off the CHIME security access code(s). mode. When on, any entry through a LED READY INDICATOR: (GREEN) Lit protected delay or perimeter zone while the indicates system is ready to be armed, system is disarmed will cause a tone to while unlit indicates system not ready. sound at the Keypad(s). LED ARMED INDICATOR: (RED) Lit ✳ READY : When depressed prior to when the system has been
Summary of the content on the page No. 14
Entry/Exit Delays General Information Your system has installer-programmed time delays, known as exit delay and entry delay. Whenever you arm your system, exit delay gives you time to leave through the designated exit door without setting off an alarm. Exit delay begins immediately after entering any arming command, and applies to all modes of arming protection. If programmed, a slow beeping will sound throughout the exit delay period. Entry Delay gives you time to disarm the system wh
Summary of the content on the page No. 15
Security Codes and Authority Levels General Information At the time of installation, you were assigned an authority level and a personal four-digit security code, known only to you and yours. The security code must be entered when arming and disarming the system. The authority level defines the system functions that you can perform. As an additional safety feature, other users that do not have a need to know your code can be assigned different security codes, and each user can be given
Summary of the content on the page No. 16
Security Codes and Authority Levels (cont’d) Authority Levels Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are certain system functions you may be prohibited from performing. In summary, there are six authority levels, each having certain system restrictions as shown below. Level 1 Master: Can perform all system functions in assigned partitions, and can add, delete or change Manager and Operator level user
Summary of the content on the page No. 17
Security Codes and Authority Levels (cont’d) General Rules on Authority Levels and Changes • A user may not delete or change the user code of the SAME or HIGHER authority than which he is assigned. • A user may only ADD users to a LOWER authority level. • A user may assign access codes only to those partitions to which the user adding the code has access. (Ex. a user with access to only partition 1 cannot assign codes in partition 2.) • The only way to assign a user's authority level i
Summary of the content on the page No. 18
Security Codes and Authority Levels (cont’d) To Add a User IMPORTANT: Temporary users should not be shown how to use any system function they do not need to know (e.g. bypassing protection zones). CODE 1. Enter Master or Manager code and press the 8 key. 2. Enter the new user's 3-digit User Number (002-250). 3. Enter 4-digit security code for that user. The following prompts will appear. Enter 1 to add a new user code. Entering 0 will ADD NEW USER? change the existing user's co
Summary of the content on the page No. 19
Security Codes and Authority Levels (cont’d) If you as a user have access to other partitions, the MULTI-ACCESS ? keypad will prompt for ability of this new user to 0 = NO , 1 = YES access (GOTO) those partitions. Press 0 (NO) or 1 (YES). If no, the system activates this user code and exits “Add a User” mode. If yes, the keypad prompts for the Global Arm option for this user. Press 1 (YES) if this user will be allowed to try to GLOBAL ARM ? arm more than one partition at the same ti
Summary of the content on the page No. 20
Security Codes and Authority Levels (cont’d) When all partitions have been displayed, the PART. 1 A0* WHSE keypad will scroll through the partition(s) to which USER 003 AUTH=3G. access has been assigned, and will display the user number, authority level and global arm option for each. The “G” after the authority level indicates that the global arm feature is active for this user in the displayed partition. The "*" indicates the partition from which this user can be changed or del
