Summary of the content on the page No. 1
Wireless Network
IP Camera
PROFESSIONAL SERIES
Model 550703
User’s Guide LV2.0
Summary of the content on the page No. 2
WIRELESS NETWORK IP CAMERA User’s Guide FCC Compliance Statement The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designe
Summary of the content on the page No. 3
WIRELESS NETWORK IP CAMERA User’s Guide Important Notice 1. Camera surveillance laws may differ for each country. Please contact the local authorities to avoid any surveillance law violations. 2. Please note that the CMOS lens that comes with the Wireless Network IP Camera can be damaged permanently if the camera lens is exposed to direct sunlight. If your application demands prolonged exposure to sunlight, you should consider equipping it with a sun visor. 3. The Wireless Network IP
Summary of the content on the page No. 4
WIRELESS NETWORK IP CAMERA User’s Guide TABLE OF CONTENTS 5 PRODUCT OVERVIEW ABOUT WIRELESS IP NETWORK CAMERA 5
Summary of the content on the page No. 5
WIRELESS NETWORK IP CAMERA User’s Guide CONFIGURINGADMINISTRATION TOOLS 31 A M O 32 DMINISTRATOR ENU VERVIEW IMAGE CONFIGURATION 33
Summary of the content on the page No. 6
WIRELESS NETWORK IP CAMERA User’s Guide PRODUCT OVERVIEW About the Wireless Network IP Camera The Wireless Network IP Camera can be connected directly to Ethernet or Fast Ethernet networks and also supports wireless transmission based on the IEEE 802.11b standard. It is different from the conventional PC Web Camera; the Wireless Network IP Camera is as standalone system with built- in CPU and web-based solutions providing a low cost product that can transmit high quality video images
Summary of the content on the page No. 7
WIRELESS NETWORK IP CAMERA User’s Guide Main Features and Benefits Convenient Operation The Wireless Network IP Camera is a standalone system with built-in CPU requiring no special hardware or software such as PC frame grabber cards. The Wireless Network IP Camera supports both Active-X mode for Internet Explorer and JAVA mode for Internet Explorer and Netscape Navigator. Therefore, all that is required is a common web browser, such as Microsoft Internet Explorer 4.x or above.
Summary of the content on the page No. 8
WIRELESS NETWORK IP CAMERA User’s Guide Security Your Wireless Network IP Camera includes a self-contained web server, which means that digital images can be secured in the same manner as with any other Internet host. Your Network Administrator, using the unit’s security settings in combination with an organization’s Internet firewall, normally implements data protection. The Administrator can decide whether individuals, groups, or the whole world may access the camera. The Wireless Networ
Summary of the content on the page No. 9
WIRELESS NETWORK IP CAMERA User’s Guide System Requirements Network 10Base-T Ethernet or 100Base TX Fast Ethernet Wireless Local Area Network IEEE 802.11b Wireless LAN Recommended PC or Notebook to Access the Wireless Network IP Camera. System Requirements: CPU: Pentium II, 266 MHz or above Memory Size: 32 MB (64MB recommended) VGA card resolution: 800 x 600 or above Web Browser: Internet Explore 5.0 or above (Active-X & JAVA Mode-Image View for Windows OS and JAVA
Summary of the content on the page No. 10
WIRELESS NETWORK IP CAMERA User’s Guide PHYSICAL DESCRIPTION Contents Carefully remove all items from the package. In addition to this User’s Guide, be certain that you have: One Wireless Network IP Camera (550703) Two External Wireless Antennas One Installation CD-ROM One Quick Installation Guide One Printed Manual One AC Power Adapter (suitable for your country’s electric power) One Camera Stand * If any item is missing, or if you find any damage or mismatch, promptl
Summary of the content on the page No. 11
WIRELESS NETWORK IP CAMERA User’s Guide Top view and Description Network Activity LED Image Capture LED Operating status LED Image Capture LED (red): The Image Capture LED flashes when users are accessing the camera,. It flashes once when an image is being captured or saved. Operating Status LED (green): This LED indicates the Wireless Network IP Camera’s operating status. Once power is supplied, the LED stays on for the first 15-20 seconds, and then it blinks once every second a
Summary of the content on the page No. 12
WIRELESS NETWORK IP CAMERA User’s Guide Rear View and Description Antenna Connector RS 232 Connector Network Connector GPIO Connector Power Connector LAN/ WLAN-LAN/ WAN Power Connector: Only use the AC adapter provided by your dealer to avoid any possible damage from electric shock. Network Connector: For connection of 10baseT Ethernet or 100base TX Fast Ethernet cable. GPIO Connector: For connection of external devices such as infrared sensors, alarms,
Summary of the content on the page No. 13
WIRELESS NETWORK IP CAMERA User’s Guide INSTALLATION SUMMARY 1. Connect Ethernet and power to the Wireless Network IP Camera. 2. Install and launch the “IP-Installer” 3. Assign an IP address and network settings 4. Securely mount the Wireless Network IP Camera. 5. Adjust the Focus 12
Summary of the content on the page No. 14
WIRELESS NETWORK IP CAMERA User’s Guide ASSIGNING IP ADDRESS & ACCESSING THE WIRELESS NETWORK IP CAMERA HOME PAGE Assigning an IP Address To access the Wireless Network IP Camera, you need to assign an appropriate network IP address. IMPORTANT • Please use the newly assigned IP address, do NOT use any occupied IP address, the default, or the example IP address. • It is highly recommended that you assign an IP address before placing the Wireless Network IP Camera in a remote locati
Summary of the content on the page No. 15
WIRELESS NETWORK IP CAMERA User’s Guide Assigning an IP Address Using IP Installer (recommended) Connecting the Wireless Network IP Camera to a PC 1. Connecting with direct cable (Non Crossover UTP cable). Used when connecting the Wireless Network IP Camera to a switch, hub or router. Connect the Wireless Network IP Camera to a PC through a HUB 2. Connecting with Crossover UTP Cable. Use the crossover cable to directly connect the Wireless Network IP
Summary of the content on the page No. 16
WIRELESS NETWORK IP CAMERA User’s Guide Using IP Installer To install an IP address, you should use the IP Installer provided with Wireless Network IP Camera. You can also download the latest version of this program from the web site (http://intellinet- network.com). Note : System requirements for IP Installer: Microsoft Windows9x/NT/2000/XP. ① Execute the IP Installer after the Network IP Camera has completed the boot process (wait at least 15 sec
Summary of the content on the page No. 17
WIRELESS NETWORK IP CAMERA User’s Guide After entering all addresses for the Wireless Network IP Camera, click the “Change Network Configurations” button. The following message is displayed once all the information is set up properly. Click OK. NOTE After changing the Network Configuration, it will take about 15 seconds to reboot the Wireless Network IP Camera.. After that you may access the Wireless Network IP Camera Home Page. 16
Summary of the content on the page No. 18
WIRELESS NETWORK IP CAMERA User’s Guide Assigning IP Address by using Hyper Terminal (Advanced Users only) You can assign an IP address by using Hyper Terminal. In this case, you should configure Hyper Terminal first Configuring Hyper Terminal Hyper Terminal is a basic program for Windows 9x/NT/2000 and XP. A PC can communicate with external devices through the serial port by using this program. The steps you should take to set the Hyper Terminal are as follows in the case of Window
Summary of the content on the page No. 19
WIRELESS NETWORK IP CAMERA User’s Guide ③ Configure bit/sec as 19,200 and leave the other settings at the default values. ④ The panel looks like this image when configured properly. (If it does not, repeat steps 1-4.) 18
Summary of the content on the page No. 20
WIRELESS NETWORK IP CAMERA User’s Guide Assigning IP Address Follow these steps to assign an IP address using Hyper Terminal 1. Execute “Hyper Terminal” on your PC 2. Connect an RS232 Cable to the serial port of the PC that you have selected in Chapter 4.3.1 - Configuring Hyper Terminal and the Wireless Network IP Camera serial port while Hyper Terminal is executed. 3. Supply power to the Wireless Network IP Camera. 4. A count down will start with the message “Press any key to stop a
