Honeywell 5894PI user manual

Summary of the content on the page No. 1

K5942V2 7/04
5894PI

PASSIVE INFRARED MOTION DETECTOR/TRANSMITTER

INSTALLATION INSTRUCTIONS

GENERAL INFORMATION SPECIFICATIONS BATTERY ACTIVATION/INSTALLATION
The 5894PI Passive Infrared Motion Pet Immune Lens: 1. Remove front cover by pressing the front
Detector/Transmitter is a 10-year battery- 35 ft x 45 ft (10.6m x 13.7m). cover latch and lifting the cover off. See
operated wireless device intended for use as Figure 2.
28 zones (8 over, 8 long range, 8 intermediate,
part of

Summary of the content on the page No. 2

To program the detector, place the LED jumper 2. Use the mounting plate to mark the in the TEST position (see Figure 4), the Pulse mounting holes on the mounting surface Count jumper in the STD position (see Figure (See Figure 7). 5), batteries installed and cover on. Temporarily cover the lens (a cloth will do) to prevent any activation by the detector. When prompted for the device’s serial number, you may either manually enter it or transmit from the unit (remove the cloth cover and

Summary of the content on the page No. 3

Note: Each time you remove and replace the TEST PROCEDURES MAINTAINING PROPER OPERATION front cover, or remove and replace the sensor In order to maintain the detector in proper Important: Testing should be conducted with in the mounting plate, the sensor will transmit the protected area cleared of all people. Place working condition, it is important that the user every alarm signal for 64 alarm events. the protective system's control in the Test observes the following: 1. Remove front

Summary of the content on the page No. 4

LIMITATIONS OF THE PIR MOTION DETECTOR LIMITED WARRANTY While the Intrusion Detector is a highly reliable intrusion detection Honeywell International Inc. (“Seller”), 165 Eileen Way, Syosset, New device, it does not offer guaranteed protection against burglary. Any York 11791, warrants its product(s) to be in conformance with its own Intrusion Detection device is subject to compromise or failure to warn plans and specifications and to be free from defects in materials and for a variety o