Summary of the content on the page No. 1
45136
Wireless Alarm System
Alarm Siren
User’s Manual
Low Batt On Armed
ON/OFF LEARN
Choice
Choice
ALERT
ALERT™
™
Control all Sensors
& accessories from
one location
Summary of the content on the page No. 2
Table of Contents Important Safeguards 4 Introduction 4 Assigning a Alarm Siren to the system 5-6 Installation 6 Testing the Alarm Siren or your system 6 Erasing Alarm Siren from system 7 Low battery indicator 8 Battery warnings 8 FCC Warning 10
Summary of the content on the page No. 3
Before connecting or operating the Alarm Siren, please read these instructions carefully and save this manual for future reference. Congratulations ™ The GE Choice Alert Wireless Alarm System is one of the most affordable and expandable wireless alarm systems available. You’ll discover the system offers many features typically found in custom installed Alarm systems. The Choice Alert system is reliable and easy-to-use. With Choice Alert you can select from a line of Sensors and Access
Summary of the content on the page No. 4
Important safeguards Pre Cautions 1. Do not attempt to disassemble the Alarm Siren, unless described in the user’s manual. There are no user serviceable parts. . Handle with Care – Avoid striking or shaking. Improper use or storage could damage the Alarm Siren. Modifying or tampering the device or its internal components can cause a malfunction and void the Alarm Siren’s warranty. . If you feel the Alarm Siren or any part of the Choice Alert system is not operating correctly or as d
Summary of the content on the page No. 5
Parts Check List Identify all the parts before proceeding. Alarm Siren 2 - Screws Low Batt On Armed Low Batt On Armed 2 - Plastic anchors AC Apapter Low Batt On Armed The Alarm Siren will increase your system’s sound. Use in areas where the Control Center’s siren cannot be heard. Adding a Alarm Siren In order to link the Alarm Siren to the Control Center, you will need to have the Alarm Siren and Control Center near each other Step 1 - Remove cover on bottom of the Alarm Siren. Plug in
Summary of the content on the page No. 6
Step 2 - Press and hold the Learn button inside the Alarm Siren. The ‘ON’ indicator on the front will begin to flash and it will sound continuious beeps. Input DC 12V Step 3 - While continuing to press the Learn - + Mute button on the Alarm Siren, press and hold Learn the Mute button on the side of the Control Center for three seconds. The Control Alert Chime Center will send a test signal to the Alarm Off Siren. When the Alarm Siren receives the test signal it will
Summary of the content on the page No. 7
wood, or the screws and anchors included for drywall mounting, as shown in diagram (2). 1. Wood (screws only) - Drywall (screws & anchors) - 2. Wood (screws only) - Drywall (screws & anchors) - Erasing the Alarm Siren from the system Step 1 - Remove the AC Adapter and battery from the Alarm Siren. Step 2 - With the AC Adapter and battery removed, press and hold the Learn button. Step 3 - While pressing the Learn button, re-install AC Adapter. The LEDs will flash rapidly and the
Summary of the content on the page No. 8
Low Battery Indicator The Alarm Siren offers battery back-up using a “9V” battery. Remove screws marked with arrows on back and attach battery to tab according to polarity markings. When the battery voltage reaches a low level, the “Low battery” LED indicator on the front will begin to flash until battery is replaced. If the battery is not installed the “Low battery” LED indicator will remain on. Model # Description Battery Type Battery Life* 45129 Control Center (4) “AAA” 24 mon
Summary of the content on the page No. 9
8
Summary of the content on the page No. 10
FCC Warning Any unauthorized changes or modifications to the equipment would void the user’s warranty and may conflict with both state and federal laws. The Choice Alert system complies with part 15 of the FCC rules. Operation is subject to the following conditions: 1) The Choice Alert system may not cause harmful interference. ) The Choice Alert system may accept any interference received including interference that may cause undesired operation. NOTE: This equipment has been tested
Summary of the content on the page No. 11
WARNING Limitations of Alarm Products This product should be tested periodically to make sure it is working properly. The product, if used properly, may reduce the risk of burglary, robbery, or other adverse events. However, JASCO is not an insurer, this product is neither insurance nor a guarantee that such an event will be prevented, and users should protect themselves with proper insurance. JASCO makes no representation that this product cannot be compromised or circumvented, that it w
Summary of the content on the page No. 12
is a trademark of the General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114. This Jasco product comes with a 45136-1 1 year limited warranty. Visit 01/09/08 www.jascoproducts.com for details.
