Bosch Appliances 500 user manual

Summary of the content on the page No. 1

MIC Series 500 Camera
MIC Series 500
en Quick Install Guide

Summary of the content on the page No. 2

Summary of the content on the page No. 3

MIC Series 500 Camera Table of Contents | en 3 Table of Contents 1 MIC 500 Series Camera Quick Start Guide 4 1.1 MIC 500 Series Camera Mounting Instructions 4 1.2 Safety Earthing of the MIC 500 Series Camera 5 1.3 Commissioning the MIC 500 Series Camera 6 Bosch Security Systems, Inc. User’s Manual F.01U.173.601 | 2.0 | 2010.11

Summary of the content on the page No. 4

4 en | MIC 500 Series Camera Quick Start Guide MIC Series 500 Camera 1 MIC 500 Series Camera Quick Start Guide CAUTION! To reduce the risk of electrical shock, disconnect power supply before opening the power supply unit. Power disconnect: power supply units have power supplied whenever the power cord is inserted into the power source. WARNING! Installation should be carried out by qualified personnel only in accordance with the applicable local codes. Bosch Security Systems Inc. accepts no

Summary of the content on the page No. 5

MIC Series 500 Camera MIC 500 Series Camera Quick Start Guide | en 5 The MIC 500 Series camera has a security attachment point for attaching to a safety chain (not supplied), which in turn should be attached to a secure part of the structure during installation or removal. WARNING! Use caution when installing the MIC 500 Series camera. Follow common sense precautions such as fitting a safety chain. 1.2 Safety Earthing of the MIC 500 Series Camera The electronics and housing of the MIC 500 Se

Summary of the content on the page No. 6

6 en | MIC 500 Series Camera Quick Start Guide MIC Series 500 Camera A standard female BNC connector provides the composite video output from the MIC 500 Series camera. Telemetry Connections The MIC 500 Series camera can be daisy-chained in a multi-drop configuration, the last or furthest camera in the chain should be typically terminated with a 120 Ω resistor placed across the cameras receiving pair. Telemetry Signal Function Telemetry Signal Name HD4 or HD5 RS485+ to camera RxB Pin 1 RS485–

Summary of the content on the page No. 7

Summary of the content on the page No. 8

Bosch Security Systems, Inc. Robert-Koch-Straße 100 D-85521 Ottobrunn Germany Phone +49 89 6290-0 Fax +49 89 6290-1020 www.boschsecurity.com © Bosch Security Systems, Inc., 2009