Summary of the content on the page No. 1
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 1
18v Flashlight
Lampe de poche 18v
Linterna de 18v
Instruction manual
Manuel d'instructions
Manual de'instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN,
CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA.
ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL
PRODUCTO.
CATALOG NUMBERS
PC1800FL
Batteries and chargers sold separately PCL180FL
Summary of the content on the page No. 2
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 2 General Power Tool Safety Warnings Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark
Summary of the content on the page No. 3
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 3 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the pow
Summary of the content on the page No. 4
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 4 • Don’t touch lens surface when bulb is lit or immediately after use. • Handle light with care around any flammable surface. • Do not expose light or charger to wet or damp areas. Do not expose light or charger to rain or snow. • Do not wash light or charger with water or allow water to get inside light or charger. • While light is in use, do not cover with cloth or other flammable materials due to increased risk of fire. • Do not operate wit
Summary of the content on the page No. 5
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 5 FUNCTIONAL DESCRIPTION A Figure A 1 1. On/Off Switch 3 2 4 2. Release Button 3. Pivoting Head 4. Lens Holder 5. Battery (not included) 6 5 6. Battery Release Button (on battery) This product can accept any of the batteries and chargers listed in the chart below. NI-CD Battery Packs and Chargers LI-ION Battery Packs and Chargers Description Cat. # Description Cat. # PC18BL Battery
Summary of the content on the page No. 6
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 6 • Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. • Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution. • An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of t
Summary of the content on the page No. 7
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 7 • Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 105°F (40C˚) (such as outside sheds or metal buildings in summer). WARNING: Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or dama
Summary of the content on the page No. 8
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 8 4. The completion of charge is indicated by the LED remaining on continuously. The pack is fully charged and may be used at this time or left on the charger. CHARGER DIAGNOSTICS This charger is designed to detect certain problems that can arise with the battery packs or the power source. Problems are indicated by one LED flashing in different patterns. BAD BATTERY The charger can detect a weak or damaged battery. The LED flashes in the pattern
Summary of the content on the page No. 9
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 9 INSTALLING AND REMOVING THE BATTERY PACK TO INSTALL BATTERY PACK: Insert battery C pack as shown in figure C. TO REMOVE BATTERY PACK: Depress the D battery release button as shown in figure D and pull battery pack out. OPERATING INSTRUCTIONS SWITCH To turn the light on, push the on/off button (1). To turn it off, push the button again. PIVOTING THE LIGHT HOUSING (FIGURE E) The light can be pivoted by pressing in on the E release button (2) a
Summary of the content on the page No. 10
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 10 CHANGING THE LIGHT BEAM The light beam can be concentrated or dispersed by turning the lens holder (4). REPLACING THE BULB (FIGURE F) WARNING: Shock Hazard. Disconnect battery pack before replacing the bulb. Such preventative safety measures reduce the risk of personal injury. CAUTION: Burn hazard. Lens or bulb may be hot immediately after use. Porter Cable Service Replacement Bulb Flashlight Catalog Numbers Service Part Number Bulb PC1800FL,
Summary of the content on the page No. 11
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 11 THE RBRC™ SEAL The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the LI-ION or NI-CD battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by Porter-Cable. RBRC™ in cooperation with Porter-Cable and other battery users, has established programs in the United States to facilitate the collection of spent LI-ION or NI-CD batteries. Help protec
Summary of the content on the page No. 12
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 12 The following are PORTER-CABLE trademarks for one or more power tools and accessories: a gray and black color scheme; a “four point star” design; and three contrasting/outlined longitudinal stripes. The following are also trademarks for one or more Porter-Cable and Delta products: 2 BY 4®, 890™, Air America®, AIRBOSS™, Auto-Set®, B.O.S.S.®, Bammer®, Biesemeyer®, Builders Saw®, Charge Air®, Charge Air Pro®, CONTRACTOR SUPERDUTY®, Contractor's
Summary of the content on the page No. 13
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 13 Lampe de poche 18 v Manuel d'instructions www.portercable.com N° DE CATALOGUE PC1800FL Blocs-piles et chargeurs vendus séparément PCL180FL 13
Summary of the content on the page No. 14
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 14 Avertissements de sécurité généraux pour les outils électriques Lire tous les avertissements de sécurité et toutes les directives. Le non- respect des avertissements et des directives pourrait se solder par un choc électrique, un incendie et/ou une blessure grave. Conserver tous les avertissements et toutes les directives pour un usage ultérieur. Le terme «outil électrique» cité dans les avertissements se rapporte à votre outil électrique à
Summary of the content on the page No. 15
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 15 d) Retirer toute clé de réglage ou clé standard avant de démarrer l’outil. Une clé standard ou une clé de réglage attachée à une partie pivotante peut causer des blessures. e) Ne pas trop tendre les bras. Conserver son équilibre en tout temps. Cela permet de mieux maîtriser l’outil électrique dans les situations imprévues. f) S’habiller de manière appropriée. Ne pas porter de vêtements amples ni de bijoux. Garder les cheveux, les vêtements et
Summary of the content on the page No. 16
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 16 INSTRUCTIONS DE SÉCURITÉ IMPORTANTES POUR LES LAMPES DE POCHE AVERTISSEMENT : LORS DE L’UTILISATION D’APPAREILS ÉLECTRIQUES, TOUJOURS METTRE EN PRATIQUE DES PRÉCAUTIONS DE BASE, NOTAMMENT LES SUIVANTES : • Lire toutes les directives avant d’utiliser l’appareil électrique. • Pour réduire les risques de blessures, exercer une étroite surveillance lors de l’utilisation de l’appareil électrique à proximité d’enfants. • Utiliser uniquement des a
Summary of the content on the page No. 17
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 17 LIGNES DIRECTRICES EN MATIÈRE DE SÉCURITÉ - DÉFINITIONS Il est important que vous lisiez et compreniez ce mode d’emploi. Les informations qu’il contient concernent VOTRE SÉCURITÉ et visent à ÉVITER TOUT PROBLÈME. Les symboles ci-dessous servent à vous aider à reconnaître cette information. DANGER : Indique une situation dangereuse imminente qui, si elle n’est pas évitée, causera la mort ou des graves blessures. AVERTISSEMENT : Indique une situ
Summary of the content on the page No. 18
90546223 PC1800FL PC180FL 1/6/09 10:22 AM Page 18 DIRECTIVES DE SÉCURITÉ IMPORTANTES POUR LES CHARGEURS DE PILES CONSERVER CES DIRECTIVES : ce mode d’emploi comprend d’importantes directives de sécurité pour les chargeurs de piles. • Avant d’utiliser le chargeur, lire toutes les directives et tous les avertissements figurant sur le chargeur, le bloc-piles et le produit utilisé avec le bloc-piles. AVERTISSEMENT : risque de choc électrique. Éviter la pénétration de tout liquide dans le charge
Summary of the content on the page No. 19
90546223 PC1800FL PC180FL 1/6/09 10:23 AM Page 19 dans un centre de réparation autorisé. • Ne pas démonter le chargeur; confier l’entretien ou la réparation de l’appareil à un centre de réparation autorisé. Le remontage non conforme du chargeur comporte des risques de choc électrique, d’électrocution ou d’incendie. • Débrancher le chargeur avant de le nettoyer. Cela réduira le risque de choc électrique. Le risque ne sera pas éliminé en enlevant simplement le bloc-piles. • NE JAMAIS relier deu
Summary of the content on the page No. 20
90546223 PC1800FL PC180FL 1/6/09 10:23 AM Page 20 INFORMATION CONCERNANT LE CAPUCHON DU BLOC-PILE Capuchon du bloc-pile Un capuchon est fourni avec le bloc-pile en vue d’être utilisé chaque fois qu’on retire ce dernier de l’outil ou du chargeur en vue de le ranger ou de le transporter; enlever le capuchon avant de remettre le bloc-pile dans le chargeur ou dans l’outil. AVERTISSEMENT : risque d’incendie. Ne pas ranger ou transporter les piles de manière à ce que des objets métalliques puissent
