Summary of the content on the page No. 1
1 2 4 5 ON/OFF
3
6 VOLUME/BALANCE TUNE
7 8 COMPRESSION
Bedienungsanleitung..................................................................................................3
a) b)
Instructions for use .....................................................................................................11
Notice d’emploi ............................................................................................................19
Istruzioni per l’uso................................................
Summary of the content on the page No. 2
Konformitätserklärung FCC Rules Sennheiser electronic GmbH & Co. KG erklären, dass dieses Gerät die anwendba- This equipment has been tested and found to comply with the limits for a Class B digital ren CE-Normen und Vorschriften erfüllt. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasona- RS 140 Bedienungsanleitung ble protection against harmful interference in a residential installation. This equipment Approval Instruction Manual generates, uses and ca
Summary of the content on the page No. 3
RS140_GB.fm Seite 11 Dienstag, 25. Oktober 2005 5:38 17 RS 140 The RS 140 is an up-market wireless RF headphone system suitable for use with hi-fi systems and televisions. The headphones are very comfortable to wear and the system incorporates a variety of technical innovations such as: Transmitter with automatic on/off function Automatic transmitter search-tuning with memory function Self-learning automatic level control with memory function Switchable dynamic compression ensures excelle
Summary of the content on the page No. 4
RS140_GB.fm Seite 12 Dienstag, 25. Oktober 2005 5:38 17 Safety instructions Never open the transmitter nor the receiver, otherwise you can be injured and the warranty becomes null and void. Attention: Do not wear the headphones in situations which require special attention (e.g. in traffic or when performing skilled jobs). Attention: Listening at high volume levels can lead to hearing defects. Attention: Do not charge standard batteries via the headphones! Only use rechargeable batteries (da
Summary of the content on the page No. 5
RS140_GB.fm Seite 13 Dienstag, 25. Oktober 2005 5:38 17 Connecting the transmitter (Fig. 1) Establish the necessary connections (mains unit, audio connecting cable). Removing the ear cushions (Fig. 2 and 3) The ear cushions are secured to the earcups by means of a quarter turn fastener. To remove an ear cushion, turn it in the direction of the arrow until you overcome a slight resistance and lift it off the earcup. Inserting the rechargeable batteries (Fig. 4) Remove the left ear cushion (Fi
Summary of the content on the page No. 6
RS140_GB.fm Seite 14 Dienstag, 25. Oktober 2005 5:38 17 Turning the transmitter on and off (Fig. 5) Turn on the sound source. This automatically activates the transmitter and the green LED “ON/OFF” lights up. If the sound source is turned off, the transmitter is automatically deactivated after approx. 3 minutes (the LED “ON/OFF” goes off). Note: The automatic level control only functions if the volume of the sound source is sufficient. Turning the headphones on and off (ON/OFF, Fig. 5) Move t
Summary of the content on the page No. 7
RS140_GB.fm Seite 15 Dienstag, 25. Oktober 2005 5:38 17 headphones automatically turn off. By pressing the TUNE button, the headphones can be turned on again. Self-learning automatic level control with memory function The transmitter is equipped with an automatic level control which ensures that the headphones always receive an optimum signal. The level is continuously adjusted during operation and remains stored as long as the transmitter is connected to the mains. Under-modulation (audio
Summary of the content on the page No. 8
RS140_GB.fm Seite 16 Dienstag, 25. Oktober 2005 5:38 17 Meanings of the LEDs and acoustic signals Transmitter, LED Status Meaning ON/OFF lit Audio signal is (green) present, transmitter is activated CHARGE lit Rechargeable (red) batteries are being charged flashes slowly Rechargeable batteries are fully charged, transmitter has switched to trickle charging COMPRESSION lit “COMPRESSION” INPUT LEVEL function is activated (yellow) flashes slowly Audio signal too low flashes rapidly Audi
Summary of the content on the page No. 9
RS140_GB.fm Seite 17 Dienstag, 25. Oktober 2005 5:38 17 Turning the acoustic signals (beeps) on and off The acoustic signals of the headphones can be turned on or off as follows: Turn the headphones on. Press the TUNE button for 5 seconds. Turn the headphones off. If the acoustic signals are turned on, the headphones produce a sequence of beeps at turn-off. If no beeps are produced, the acoustic signals are now turned off. If problems occur... Check if all jack plugs are connected corre
Summary of the content on the page No. 10
RS140_GB.fm Seite 18 Dienstag, 25. Oktober 2005 5:38 17 Accessories Additional headphones: HDR 140 (864 MHz) Cat. No. 009934 HDR 140 (926 MHz) Cat. No. 009935 Replacement ear cushions: Cat. No. 511792 Only use original Sennheiser components and spare parts, otherwise the units can be damaged and the warranty becomes null and void. Warranty 2-year warranty Type approval regulations Please observe the repective country-specific type approval regulations! Specifications Modulation FM stereo F
